DJI O3 Air Unit / FLYWOO Explorer LR4 O3 Operation Guide

Flight Steps Guide
1. Bind the remote control (TBS/ELRS/RXSR/DJI V2)
2. Binding goggles (DJI GOGGLE V2/FPV V2)
3. Flight mode switch setting
4. Install the propeller
5. Finding Drone Buzzer
6. GPS rescue mode

[@devinkelley2399]

But how do you arm the drone? I can't get my LR4 to arm with Dji controller 2

[@YTFPV]

how do you get the app to recognize the drone i just got it but it's wont see it or even in beta-flight ?

[@georgepf]

Can you please include the ELRS RX version somewhere? I can't find it absolutely anywhere - not on the product page, not in the manual, and the ExpressLRS configurator lists two versions, "Flywoo EL24E 2400 RX" and "Flywoo EL24P 2400 RX". How do I know which one you put on the drone?

[@flywoofpv]

EL24P .

[@eikepape3920]

My tx16s receiver gets stuck in binding....no download or anything - giving up after 2 days of unsuccessful troube shooting

[@captaindronieversefpv]

Make a video Tutorial Flywoo explorer with INAV please

[@seanpaul211]

Can the quad connect straight to speedybee app on your phone, like in the video.?

[@jasonleesuffolk]

But you can't fly far away using the v2 goggles?

[@Zazzik007]

i flew for around 1.5 km with a drone in a direct line of site

[@nick_fpv8710]

Fly more then 5 km Googles v2 crystal patch, drone antenna 145 mm flyfish rc dual band

[@MassimoHely]

hi please is possible put O3 in my Explorer v2 frame with hd caddx? regards

[@flywoofpv]

O3 frame modification, the old version cannot be installed

[@MassimoHely]

@@flywoofpv hi thank you for reply so can i change the caddx version frame by myself? Or do I have to buy a new frame? what are the modifications to do for the O3 in the caddx frame? thank you

[@flywoofpv]

@@MassimoHely Only the front arm has not changed, others have been modified, it is recommended to buy a new frame

[@MassimoHely]

@@flywoofpv thank you again for answers so Is it possible to buy only the Explorer frame for the O3?regards

[@flywoofpv]

@@MassimoHely The new frame is suitable for all analog and digital video transmissions, including Avatar Snail VTX

[@RETUNSKIH]

Can the camera angle be changed? (of course manually)

[@kituschownus4335]

Yes

[@eprohoda]

salut~you madee beautiful view~ wanna a promotion?,farewell,flywoo!💫

[@kalyan3]

is there a pair button? I'm using the TBS system and my light on the drone is solid red. No flashing green. This is a new drone. Please help

[@aqwswqa1]

Same situation here. Did you manage to bind it?

[@kalyan3]

yeah, there was a button to pair on the chip. it's super tiny and you might have to remove the top frame cover to access it.@@aqwswqa1

[@zet39]

Same here

[@kalyan3]

check my above reply. just gotta remove the top frame and hit that small button with some tweezers or something@@zet39

[@aqwswqa1]

Finally managed to reset it so it could link. You need to unscrew the top in order to expose the receiver and manually press the reset button. It’s the only way to do it