As you have installed the ESC? I bought the ESC, but the board (is above right) has 4 wires instead of 3 having the bangood, has one more that is RPM, as it is connected?
Hi, did you solve the problem by remplacing the transmitter and the ESC controller? Do you know exactly what the problem you had was?. Look, I am having a problem and is that the quad keeps tilting even though I have calibrated everything (except ESC, probably is because if that?)
Javier Cepeda As i understand my problem was with transmitter. On 50% throttle it stops the engine. About ESC: it was dead, after i replace it with new i look closer to dead ESC and one chip was "burned" I don't know about your problem, try to inspect chips on your ESC.
+Dmitrijs Kuzmins AND last cuestion is, is all ESC compartible because un some vídeos I saw ESC w diferent version AND my CHEERSON cx20 The ESC version is, (XGW_ESC VERS 2.4b)
+junior marrero YEs, mine too have ESC version 2.4 but i received this one: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0 version 1.6 - but it work fine.
Manolo Pérez Aixendri Yes, problem solved after ESC replace. Got it from here: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0
When I am trying to arm my quadcopter it just doesn't work. I have openend it an when I turn on the transmitter the led of the receiver gets solid so I think it is bound correctly. But when I look in missionplanner I can't see any stick movements... Don't know what to try anymore so please help me out of this!
All problems solved: *1*. Engine power off at 50% throttle stick position: [*solved*] Replaced transmitter.Got it from here: www.banggood.com/Cheerson-CX-20-RC-Quadcopter-Parts-Transmitter-CX-20-023-p-917987.html?p=K11905778430201409R0 *2*. Engine doesn't work. [*solved*] New ESC, got it here: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0
+Dmitrijs Kuzmins i have the same problem as you, i tried with 2 engines, one new and one used, and 2 new ESC's and the problem still exists... is it possible that 2 BRAND NEW ESC'S came broken?
Sorry, don't know about it. Not sure that it possible. Sorry for late reply, but i image right now that to check you can put ESC to engine which work. And if everything is ok - so ESC is in working condition
Hello Dmitrijs, i gave up on the CX-20 and now only fly hexacopters ( f550 ) much more stable and takes a ton of weight on it with the right motors, retractable landing gear and a 3 axis gimbal... that's a must. happy fliyng
AvtifProduction Hi Seller says hat it could be a problem with transmitter and engine. Right now i'm waiting for replacement. After testing i'll comment about result
hi, my r front motor will not start up, even though it was spinning when I first set the Cheerson CX 2 open source. I have tried everything. never even flew it yet. any ideas?
Contacted Good Bang. They said they were going to send me two motors, a power board and the esc board and wanted me to install them. It's brand new, so I said no, no and double no. Money back or new one. So Saturday, I sent it back. It was only 3 days new!!!
mine the right motor doesn't spin sometimes and the propeller comes off. I make sure that I install the propellers properly in the correct motor. I have the same problem like yours one motor sometimes doesnt spin and the drones disconnect to the reciever it self after like 5 to 10 sec.
when I put the throttle all the way down to 0 the drone disconnect it self after 5 to 10 sec.I don't know if that is a safety thing or just something wrong in the flight controller.
Problem with motor which doesn't spin i solved changed motor ESC. There is a link in video description. What about quad disconect after sometime then throttle 0. I think it's security thing that then you stop flying motors are locked. And you need to inlock again to fly. I know that it's very annoying to unlock engines, because it's not so easy to do it
I just received my cx 20 unboxed it went through these same steps.....exact same problem also same motor not working only difference is mine started to smoke and siezed up. Any idea???
+MrJoeymook In my case, ESC after motor ticking was hot. I compared with others - they wasn't hot. Just only one. You can check by changing motor diagonally. Just remove opposite motor and put it in "bad" motor place.
+MrJoeymook Mine did the same thing last week. It got so hot I couldn't touch it. Now 3 motors move and the hot one doesn't spin at all, nor does it get hot. I'm thinking about swapping diagonal motors to see if its a bad motor. I'd hate to think that its the ESC. I have no idea how to change one of those. Any updates on your motor?
+Dmitrijs Kuzmins good for you. when I had the same problem with the motor, I thought it was a problem with motor and replaced it, but no luck, now ordered a new ESC and waiting for the delivery. thanks your video confirmed the ESC problem.
I HAVE A BRAND NEW CX-20 AND cant even get transmitter to calibrate.. I try holding the aileron trim tab up and power on transmitter and I don't get the 3 lights on,, just the one and I get a bunch of beeps. what am I doing wrong?
Thank you. Your video help me to unlock my quad. You are a saviour bro. Thumbs up. :-)
As you have installed the ESC? I bought the ESC, but the board (is above right) has 4 wires instead of 3 having the bangood, has one more that is RPM, as it is connected?
+Oscar Rodriguez Lopez In nearest time i'll disassemble my Cx-20 and take a look at wires.
I don't remember how much it was.
Hi, did you solve the problem by remplacing the transmitter and the ESC controller? Do you know exactly what the problem you had was?. Look, I am having a problem and is that the quad keeps tilting even though I have calibrated everything (except ESC, probably is because if that?)
Javier Cepeda As i understand my problem was with transmitter. On 50% throttle it stops the engine.
About ESC: it was dead, after i replace it with new i look closer to dead ESC and one chip was "burned"
I don't know about your problem, try to inspect chips on your ESC.
+Dmitrijs Kuzmins so did you repair or no you change The ESC.? because I have exactly The same problem........ how you fixit.?
+junior marrero Yes, i have changed ESC - and it fix my problem!
+Dmitrijs Kuzmins AND last cuestion is, is all ESC compartible because un some vídeos I saw ESC w diferent version AND my CHEERSON cx20 The ESC version is, (XGW_ESC VERS 2.4b)
+junior marrero YEs, mine too have ESC version 2.4 but i received this one: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0
version 1.6 - but it work fine.
Did you solve the problem with the new esc? I have the same problem in 2 motors
Manolo Pérez Aixendri Yes, problem solved after ESC replace. Got it from here: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0
When I am trying to arm my quadcopter it just doesn't work. I have openend it an when
I turn on the transmitter the led of the receiver gets solid so I think it is bound correctly.
But when I look in missionplanner I can't see any stick movements... Don't know what to
try anymore so please help me out of this!
Kevin Aka Sorry pal, i can't help you :( Don't know anything about this problem :(
All problems solved:
*1*. Engine power off at 50% throttle stick position:
[*solved*] Replaced transmitter.Got it from here: www.banggood.com/Cheerson-CX-20-RC-Quadcopter-Parts-Transmitter-CX-20-023-p-917987.html?p=K11905778430201409R0
*2*. Engine doesn't work.
[*solved*] New ESC, got it here: www.banggood.com/Cheerson-CX-20-CX20-ESC-Electronic-Speed-Controller-p-981050.html?p=K11905778430201409R0
+Dmitrijs Kuzmins i have the same problem as you, i tried with 2 engines, one new and one used, and 2 new ESC's and the problem still exists... is it possible that 2 BRAND NEW ESC'S came broken?
Sorry, don't know about it. Not sure that it possible.
Sorry for late reply, but i image right now that to check you can put ESC to engine which work. And if everything is ok - so ESC is in working condition
Hello Dmitrijs, i gave up on the CX-20 and now only fly hexacopters ( f550 ) much more stable and takes a ton of weight on it with the right motors, retractable landing gear and a 3 axis gimbal... that's a must. happy fliyng
I also switched to Phantom 3 :) Much better :)
Hi, I have the same problem as you and the same motor, did you found a solution?
AvtifProduction Hi
Seller says hat it could be a problem with transmitter and engine.
Right now i'm waiting for replacement.
After testing i'll comment about result
O meu cx 20 está desconfigurando vc sabe me dizer oque podi cer
hi, my r front motor will not start up, even though it was spinning when I first set the Cheerson CX 2 open source. I have tried everything. never even flew it yet. any ideas?
+philip dangelo could you try to swipe engines. To check, if it's a engine problem or ESC!
Contacted Good Bang. They said they were going to send me two motors, a power board and the esc board and wanted me to install them. It's brand new, so I said no, no and double no. Money back or new one. So Saturday, I sent it back. It was only 3 days new!!!
+philip dangelo I don't want to send it back. So i tried to resolve problem with banggood. It seems that work fine now :)
i have same thing! do you know how stop it yet
+SINCERE PRODUCTIONS what exactly you want to stop?
i got the same problemhow did you fix it
Which problem donyou have? Because for mevit was 2 problems : power lost on 50% throttle, and one of the motors doesn't spon at all.
mine the right motor doesn't spin sometimes and the propeller comes off. I make sure that I install the propellers properly in the correct motor. I have the same problem like yours one motor sometimes doesnt spin and the drones disconnect to the reciever it self after like 5 to 10 sec.
when I put the throttle all the way down to 0 the drone disconnect it self after 5 to 10 sec.I don't know if that is a safety thing or just something wrong in the flight controller.
Problem with motor which doesn't spin i solved changed motor ESC. There is a link in video description.
What about quad disconect after sometime then throttle 0. I think it's security thing that then you stop flying motors are locked. And you need to inlock again to fly.
I know that it's very annoying to unlock engines, because it's not so easy to do it
mine is the newer version of this quanum nova pro bigger motor but sad to say I find online for new motor
I just received my cx 20 unboxed it went through these same steps.....exact same problem also same motor not working only difference is mine started to smoke and siezed up. Any idea???
+MrJoeymook In my case, ESC after motor ticking was hot. I compared with others - they wasn't hot. Just only one. You can check by changing motor diagonally. Just remove opposite motor and put it in "bad" motor place.
Well I returned it and getting replacement copter from seller but ty for the response!!
+MrJoeymook Mine did the same thing last week. It got so hot I couldn't touch it. Now 3 motors move and the hot one doesn't spin at all, nor does it get hot. I'm thinking about swapping diagonal motors to see if its a bad motor. I'd hate to think that its the ESC. I have no idea how to change one of those. Any updates on your motor?
That right motor... sounds like the ESC crashed and then it rebooted or something. based off the start up tone.
Amigo trocar o esc
Hi I think your only problem is the ESC not the transmitter
+Nazir Khan Problem with transmitter was then throttle in 50% motors stop working. After transmitter replace - problem was solved
+Dmitrijs Kuzmins good for you. when I had the same problem with the motor, I thought it was a problem with motor and replaced it, but no luck, now ordered a new ESC and waiting for the delivery. thanks your video confirmed the ESC problem.
Косячный оказался?
Alexandr Bormotin Похоже на то :(
Bad motor, Mine was doing the same thing
There wasn't motor problem. After ESC change it start to work correct!
change esc board
unlocking the motors
Thank you. Your video help me to unlock my quad. You are a saviour bro. Thumbs up. :-)
I HAVE A BRAND NEW CX-20 AND cant even get transmitter to calibrate.. I try holding the aileron trim tab up and power on transmitter and I don't get the 3 lights on,, just the one and I get a bunch of beeps. what am I doing wrong?
Thank you. Your video help me to unlock my quad. You are a saviour bro. Thumbs up. :-)
Thank you. Your video help me to unlock my quad. You are a saviour bro. Thumbs up. :-)