GREAT VIDEO! I especially liked it when you removed the bolts that you inserted them into the new pump to keep track of which bolt goes in which hole. I have a question though. Is the thread sealer just used to keep the bolts from seizing up over time? Could I just use Permatex Aluminum Anti-Seize Lubricant? Also, how do you burp out the air from the system? Is there a bleeder somewhere? And lastly, sine my truck has 180,000 miles on it, would it be a good idea to go ahead and replace the thermostat while I have the system empty of coolant?
On these 4.7 engines with the blender screw you have to use this to get all of the air out of the system. If you don't do this your heat will not get hot and the engine will run hot. If these engines get hot you will lose your valve seats ruining your engine.
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
GREAT VIDEO!
I especially liked it when you removed the bolts that you inserted them into the new pump to keep track of which bolt goes in which hole.
I have a question though. Is the thread sealer just used to keep the bolts from seizing up over time? Could I just use Permatex Aluminum Anti-Seize Lubricant?
Also, how do you burp out the air from the system? Is there a bleeder somewhere?
And lastly, sine my truck has 180,000 miles on it, would it be a good idea to go ahead and replace the thermostat while I have the system empty of coolant?
Official offer for a free hug sir🎉
You should tell people to burp the air out with burp plug and radiator cap off until all air is out or it can overheat with trapped air on 4.7 engines
+luke burnette Thanks for the tip!
great video but fyi start telling people the exact tools to use as well for the diy folks
Does I have to have a gasket sealer as well or is it good as is but just that Rubber seal
Rubber seal only
Thanks excellent video & explanation, blessings.
you say don't use green coolant ,but the universal coolant is it not green in color??
What did you use to take off the ideling pulley
On these 4.7 engines with the blender screw you have to use this to get all of the air out of the system. If you don't do this your heat will not get hot and the engine will run hot. If these engines get hot you will lose your valve seats ruining your engine.
Bolt technique does not work on the water pump pulley
1:21 what size bolt do you recommend?
appreciate you. doing this tmrw
How can you trust a guy who calls coolant a chemical ..?
The bolt trick is working for me. I put a bolt in and is keeps spinning
Is this for the 5.9 or the 4.7 on the 02 Ram
says 4.7 on the resonator box
My thermostat is on the top hose not under the engine. 2007 5.7
I have an 08 ram 1500 and that is not what my water pump looks like
You have the 5.7 then
Can you show me pictures on how to change a water pump 2002 can you show me pictures on how to change water pumps on a 2002 Oldsmobile Aurora 3.5
The fan fell offf by itself i guess
Changing water pump on a Oldsmobile Aurora 2002 3.5 engine show me pictures
Teflon tape is a lubricant…not a sealant!
Great fucking vid man
And the engine is a???
4.7
@@DaddyRage85 I believe this video also applies to the 3.7L V6