How many microns of ceramic does the detail spray gun typically leave on the paint.. Is it more or less than applying it the traditional way with a applicator?
I found that the over spray has alot to do with the type of product that's being used. I noticed superior Product (aqua gloss) overspray is minimal to none. But if I use Chemical guys (silk & shine), meguires (natural shine), it will leave over spray. If the Product is too watery, it will leave overspray. The thicker the Product, it minimizes the chances of overspray. Too much air is escaping when the Product is to watery. The thicker the better!! (That's what she said).
I'm very concerned about the fact that you are not using a protective mask. My concern is because you keep clearing your throat. That may be a symptom of a respiratory issue developing. Check it out cause you have been very helpful to the community and would like you to enjoy a long healthy life.
Detail gun and air compressor? Hahahahaha and LMAO. Ever heard of a spray bottle? Only an idiot dresses tires/wheel wells AFTER correcting the paint OMG...
hi bro thanks for sharing but what do you use to clean the gun after you each use thanks
@@Mason-Dain I use alcohol
@@serranosmobile quick reply and for that i sub thanks brotha “
@@Mason-Dain always bro
How many microns of ceramic does the detail spray gun typically leave on the paint.. Is it more or less than applying it the traditional way with a applicator?
I believe 2
Nice to know, can you provide a link to the gun details? You would enjoy having a swivel joint on that air gun.
I bought from harbor freight
How are your setting on the top ? Like how many threads is it screwed in or out ?
Hello, so on the air compressor tool side gauge set at 50? Thanks for your time.
Correct
Carlos, is the tire gel diluted here? If so how much? I like the drive tire gel but seems a bit thick to spray out of the gun on its own
It not diluted
Hey I just bought this set up but I got the fortress 2g at 2.1 SCFM should I upgrade to the 4g at 4.0 SCFM or you think It will do the job
U need more than 4 cfm
The other air compressor rigid cost 150 4 gallon they work same ??
Hmmm probably not if it's more than 4.5 cfm is good
I found that the over spray has alot to do with the type of product that's being used. I noticed superior Product (aqua gloss) overspray is minimal to none. But if I use Chemical guys (silk & shine), meguires (natural shine), it will leave over spray. If the Product is too watery, it will leave overspray. The thicker the Product, it minimizes the chances of overspray. Too much air is escaping when the Product is to watery. The thicker the better!! (That's what she said).
🤣🤣🤣 facts
I need to know ur adjustments on the spray gun that’s my issue
I did a video on it recently
@@serranosmobile oh ok I’ll check it out
Very nice! I didn't see any overspray at all👍
Thank you 🙏
I been wanting that air compressor
It's a beast
Are you coating the fender wells on every vehicle ?
No I only dress them
Aquí tu primo caribeño bendiciones 🖐👍🙏
Serrano. Do spray plastic trim around vehicle?
yes
Fantastic
Cfm is the recover of how fast it brings air in.
Thank you
Thank you for this video
Your welcome 🙏
great info bro . saludos 👍🙏
Thank you 🙏
😂 juts find out last week read instructions 50 psi 😅 no more overspray
🤣🤣🤣
What dressing are you using?
Drive auto appearance tire gel /trim gel
Can you use a silicon based dressing with this gun?
Yes
With the right cfms yes
@@serranosmobile I have a 20gal husky compressor...I haven’t used the gun yet..but just was curious about using silicon dressing....
@@alohas6401 if it has 4.5 cfm or higher I bet you can
@@serranosmobile one more quick question...if I do use silicon based dressing..what would be the best way to clean the gun after?
Can you link the air gun
It's from harbor freight
I'm very concerned about the fact that you are not using a protective mask. My concern is because you keep clearing your throat. That may be a symptom of a respiratory issue developing. Check it out cause you have been very helpful to the community and would like you to enjoy a long healthy life.
CONvid LMAO
🤣🤣🤣🤣💀
1st from Kansas city, mo
This is a question I have had to answer alot lol 😆
Lol me too
*mind*blown*
Same
2nd
Detail gun and air compressor?
Hahahahaha and LMAO.
Ever heard of a spray bottle?
Only an idiot dresses tires/wheel wells AFTER correcting the paint OMG...
Yes 🤣🤣🤣🤣🤣💀 that's used by the IDA