How to use Bonny Doon Silhouette Die Kits

Join owner and creator of Boony Doon, G. Phil Poirier, as he demonstrates how to utilize two Bonny Doon hydraulic press kits - the silhouette die kit and the 3” form box kit. Learn the difference between the kits and watch as he creates gorgeous three-dimensional puffed forms using the kits, perfect for custom beads and jewelry components.
Shop some of the suggested products based on those seen in this video:
Silhouette Die Kit with Two Silhouette Die Plates ow.ly/fjyL50GxuFN
Bonny Doon Steel 3" Form Box Kit with BurLife® ow.ly/FpLQ50GxuKC
Bonny Doon Classic 20-Ton Manual Press & Ram ow.ly/yAl050GxuVG
Jeweler's Brass 6" x 12" Sheet, Dead-Soft ow.ly/8Q9Q50Gxv7Y
Aluminum Top Spacer for Bonny Doon Press, 6"L x 6"W ow.ly/koCx50GxveX
Durston Agile C110 Combination Rolling Mill, 110mm ow.ly/cbcR50Gxviq
Bonny Doon Long Pattern Plate for Press or Rolling Mill, #17 ow.ly/9YEm50GxvoC
Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.
Connect with Rio Online:
Visit Rio's Website:
Subscribe to Our Channel: ow.ly/dAbu309U7eg
Find Rio on Facebook: ow.ly/DpRd309U63Z
Follow Rio on Twitter: ow.ly/wdtU309U6oF
Follow Rio on Instagram: ow.ly/eu5A309U6vM

[@threecreationleather6596]

I made pancake dies to cut the shape after forming and it works great. The book Hydraulic Forming for Jewelers and Metalsmiths explains the process

[@DebMachen]

Thank You

[@RioGrande1944]

You are welcome, Deb!

[@LeslieKailVillarreal]

will 18g metal fit through the slot in the side where feed you metal in?

[@bentforkwearables9405]

Yes.

[@amburkajama]

What should be the minimum amount of "margin" left when sawing out a design?

[@RioTechs]

+Mary Amburgey Hi Mary. the minimum amount of margin is dependent on how deep you want the form to be and the complexity of the shape. In general about 1/4 inch should suffice as a starting point. If you want a deeper form or if the shape is complex then you should increase the margin. A larger margin will allow more metal to be drawn into the shape and provide support to a more complex shape.
I hope this helps. Should you have any further questions please feel free to contact our Tech support team. They can be reached at [e-mail] or by calling 1-800-545-6566

[@amburkajama]

OK, thank you so much for your quick reply!