I have a mk3 and recently had to redo the airbags, the airbag control module will have a crash stored on it with will need to be reprogrammed (this is why the light is there), this can't be done with an obd tool, I bought a new module and that cleared the code just make sure if you do this that it's the right one as they do two different modules depending on if you have airbags in the seats.
From experience, changing headlight bulbs in an NC MX5 with the bumper / headlight in place is a painful experience. Expect to lose skin even with fairly small hands
Well done! 👏🏽 👏🏽 👏🏽
Thank you 🙌🏽🙌🏽🙌🏽
I have a mk3 and recently had to redo the airbags, the airbag control module will have a crash stored on it with will need to be reprogrammed (this is why the light is there), this can't be done with an obd tool, I bought a new module and that cleared the code just make sure if you do this that it's the right one as they do two different modules depending on if you have airbags in the seats.
Thank you so much! This is super helpful 🙌🏽🙌🏽
well done...
🙌🏽🙌🏽
nice mark
Thank you tito hehe
amazing work, well done
Hi Jacques,
Thank you so much 🙌🏽🙌🏽
The problem you had with the wing mirror paint not drying has been pretty much my mileage with spray paint tbh.
Very cool car tho!
Whats wrong with your spray paint?
Aha thank you 🫡
@@markalden it never seems to dry properly so it ends up getting marked at some point.
@@ethanjack4298 ahh, sanding it down to bare plastic seemed to have worked. And also literally not touching it for a week to dry helped 👌🏽
@@markalden nice, I will try that👍
From experience, changing headlight bulbs in an NC MX5 with the bumper / headlight in place is a painful experience. Expect to lose skin even with fairly small hands
Managed to get it done. It was painful but luckily skin still all intact hehe