I never use the main system axes as my origin points. Axes can be deleted and if you ever need to copy stuff to another model, sketches attached to axes will fall over. Use the main planes which cannot be deleted
Doesn´t matter because you have to redefine all references anyway. The H/V directions are just projections and you will lose those references as well. The industry doesn´t use those planes! The proper way is to define your own axis-system.
Hallo, danke für die hilfreichen Videos. Besonders der Audiokommentar macht das ganze deutlich "lebendiger". Nach dem doch eher oberflächlichen Catia Labor an meiner FH, haben Sie mir doch recht gut weiter geholfen und einige Tricks aufgetan. Zwei Fragen stellen sich mir noch: Gibt es eine Möglichkeit im Sketcher standartmäßig das gelbe Koordinatensystem auszublenden? Wie haben Sie die "Lupe" bei 05:10 aufgerufen?
Hi, bitteschön gerne :). Leider kann man die projezierten gelben Achsen/Ursprung nicht automatisch ausblenden. Die Lupe funktioniert nur wenn mehrere Elemente in einem gewissen Radius um den Mauszeiger sind, einfach die Cursor - Nach - Oben Taste drücken ;) - funktioniert aber nicht bei geöffneten Dialogfenstern.
Hello, very good channel! But I am wondering what is the purpose of removing the parallel constraints that areautomatically created when we sketch a rectangle? Thanks.
Schade, hab vorher auch immer den Fehler gemacht diese als Bezug zu nehmen und im normalen gebrauch sind die für mich komplett nutzlos, mittlerweile sogar lästig geworden. Der Tip mit der Lupe funktioniert. Danke! Haben Sie zu Zeichnungsableitungen etwas geplant? In Catia ist das leider nicht wirklich intuitiv und letzen Endes erstelle ich die Modelle nur um später daraus die TZ und Explosionszeichnungen daraus abzuleiten.
HI, very simple just watch this one: *A* basics part VI - catia v5 training - axis system vs. projected h/v-direction in sketch - th-cam.com/video/u8Uwph_NsEU/w-d-xo.html
many thanks . I also noticed when you constrain an element you do something like an equation (115-20 ) e.g to get 95 mm. What is the reasoning behind this ?
Just try - switch to GSD - go to ->tools ->customize ->toolbars - and add that command to the GSD workbench. This will work, but the command might not work even if it is available in the GSD workbench. You should also consider, that you need more than that 3d curve tool, so you would have to add more commands than that. You could make your own toolbar.
If there is more than one element near your mousepointer - press the "arrow down" key (one of the 4 arrow keys) - but the magnifying tool works only it certain situation, even if you would need it the most. In contrast the "quick select" or "select other" in NX, SolidWorks and Inventor will work in every situation.
Hi sir in my pc im getting error please help me to resolve I designed part by using no of insert body options many time but now im getting error only the body define work object is showing on display rest of all bodies are not displaying why it happens
There is a switch/symbol in the lower toolbar, which allows you to see only the current body. "current body only" 3 bars in blue/gray clour = all bodies - 1 bar only the current body in orange colour.
Thank you, your series are helpful for me to revise after quite years...
I never use the main system axes as my origin points. Axes can be deleted and if you ever need to copy stuff to another model, sketches attached to axes will fall over. Use the main planes which cannot be deleted
Doesn´t matter because you have to redefine all references anyway. The H/V directions are just projections and you will lose those references as well. The industry doesn´t use those planes!
The proper way is to define your own axis-system.
Hallo, danke für die hilfreichen Videos. Besonders der Audiokommentar macht das ganze deutlich "lebendiger". Nach dem doch eher oberflächlichen Catia Labor an meiner FH, haben Sie mir doch recht gut weiter geholfen und einige Tricks aufgetan.
Zwei Fragen stellen sich mir noch:
Gibt es eine Möglichkeit im Sketcher standartmäßig das gelbe Koordinatensystem auszublenden?
Wie haben Sie die "Lupe" bei 05:10 aufgerufen?
Hi, bitteschön gerne :). Leider kann man die projezierten gelben Achsen/Ursprung nicht automatisch ausblenden. Die Lupe funktioniert nur wenn mehrere Elemente in einem gewissen Radius um den Mauszeiger sind, einfach die Cursor - Nach - Oben Taste drücken ;) - funktioniert aber nicht bei geöffneten Dialogfenstern.
Hello, very good channel! But I am wondering what is the purpose of removing the parallel constraints that areautomatically created when we sketch a rectangle?
Thanks.
Please watch my "catia v5 basic video" on this topic.
@@wolfgang.walden.cad.training Thanks for the reply!
Schade, hab vorher auch immer den Fehler gemacht diese als Bezug zu nehmen und im normalen gebrauch sind die für mich komplett nutzlos, mittlerweile sogar lästig geworden.
Der Tip mit der Lupe funktioniert. Danke! Haben Sie zu Zeichnungsableitungen etwas geplant? In Catia ist das leider nicht wirklich intuitiv und letzen Endes erstelle ich die Modelle nur um später daraus die TZ und Explosionszeichnungen daraus abzuleiten.
Very good morning sir. When I draw any drawing like circle or rectangle from origin and given dimension then my drawing is not green
very good👍
🙂
Einige Videos zu Drafting sind bereits "on" - leider noch ohne Audio. Werde allerdings alle nochmal neu aufnehmen - dauert nur ein Weilchen :)
Hi sir, may I know why did you delete always the yellow projected elements.
Hi, please watch this video th-cam.com/video/u8Uwph_NsEU/w-d-xo.html
why do you avoid using the yellow projected elements/ V/H in sketch mode ?
HI, very simple just watch this one: *A* basics part VI - catia v5 training - axis system vs. projected h/v-direction in sketch - th-cam.com/video/u8Uwph_NsEU/w-d-xo.html
many thanks .
I also noticed when you constrain an element you do something like an equation (115-20 ) e.g to get 95 mm. What is the reasoning behind this ?
cosak23 No special reason for that - just to show that it is possible ;)
Hi Wolfgang, how to select all the constraints at the same time?
Just go to the tree and select all constraints there.
Hi WW do we have any option to move the 3D curve tool bar from freestyle to generative shape design
Just try - switch to GSD - go to ->tools ->customize ->toolbars - and add that command to the GSD workbench. This will work, but the command might not work even if it is available in the GSD workbench. You should also consider, that you need more than that 3d curve tool, so you would have to add more commands than that. You could make your own toolbar.
Wolfgang Walden let me try thanks lot
Hi WW
Please can i know how to get the magnifying tool
If there is more than one element near your mousepointer - press the "arrow down" key (one of the 4 arrow keys) - but the magnifying tool works only it certain situation, even if you would need it the most. In contrast the "quick select" or "select other" in NX, SolidWorks and Inventor will work in every situation.
Wolfgang Walden thanks
Is there any option we can select all corners at a time
Where? In the sketch or in the 3D model?
Both of them
use the user selection filter - you can filter for points in the sketch and for edges in the model space
Why do my sketches not appearing in green colour even after constrained??
You have to activate "diagnostics"
Hi Wolfgang, wie aktiviere ich dieses Funktion in 5:10?
Cursor (Pfeiltaste) nach oben drücken.
Hi sir in my pc im getting error please help me to resolve
I designed part by using no of insert body options many time but now im getting error only the body define work object is showing on display rest of all bodies are not displaying why it happens
There is a switch/symbol in the lower toolbar, which allows you to see only the current body. "current body only" 3 bars in blue/gray clour = all bodies - 1 bar only the current body in orange colour.
Wolfgang Walden how to activate all bodies
??? Just klick on that above mentioned icon/symbol!
Rotate zoom in/out is not working from mouse i have change no of mouses same problem im getting bt it was working from tool bar icons
Pls rply sir
you have to switch on the "diagnose colours"
@@wolfgang.walden.cad.training
Sir it's already diagnosis orange
Already switch
@@lifelesson2051 Then you have to switch on "set constraints"