hi, thanks for your videos. I would like to know where I can buy such an engine? I also have a saw like the one in your video and I need to replace the motor. I found websites but I don't know if it is what I need. please, if you can leave a link where I can buy a motor for parkside? Thank you and I can't wait to see more helpful videos on your channel soon thank you.
Uff tengo 2 de estas amoladoras averiadas por el motor quemado y si el motor no estuviera por encima de 20€ a lo mejor los compraba para repararlas pero es que por 10€ más compro una copia de la makita con motor Brushless, y le hago el adaptador a x20vteam de parkside con la impresora 3D. De todas formas gracias por el vídeo muy interesante igual que los otros que tienes en el canal. Me he suscrito.
How is called the black piece on 3.19 which goes to motor and it is spinning the grinder? Or where can I get this black piece. Actually mine is broken on Parkside performance (black) angle grinder. On this angle grinder is orange colored if this matters.
This is a rubber pad that transmits the motion from the motor to the disc for smooth and silent operation. If mine was broken I would cut some rubber piece and make 4 holes in it and that would solve the problem if you can't find an original piece🙂🤝
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive. After this procedure, you throw the old motor in the trash.
Hi I have problem with the transistor in the back. It's 💥 when I work with it.anf I can't read the name/type of this (PNP) transistor.can someone tell me the type for take another one. Best regards
There is a link in the description, but the power and rpm are very low compared to the original motor and it is not worth it. Must be a 20,000 rpm motor🙂
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive. After this procedure, you throw the old motor in the trash. At least I did so
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive. After this procedure, you throw the old motor in the trash. I wrote this in response, I don't know if you saw it? 🙂
👇👇👇Subscribe to my channel👇👇👇 th-cam.com/users/ErCanEverything
Hello! How can I separate the fan from the axis? I have the same problem (broken engine), I do not bring down the ventilator wheel.
hi, thanks for your videos. I would like to know where I can buy such an engine? I also have a saw like the one in your video and I need to replace the motor. I found websites but I don't know if it is what I need. please, if you can leave a link where I can buy a motor for parkside? Thank you and I can't wait to see more helpful videos on your channel soon thank you.
thank you, 895 motor it look like so slow. does it work good?
Donde se puede pedir el motor de remplazo???
Dejé un enlace en la descripción, pero debería ser de 20.000 rpm.
Uff tengo 2 de estas amoladoras averiadas por el motor quemado y si el motor no estuviera por encima de 20€ a lo mejor los compraba para repararlas pero es que por 10€ más compro una copia de la makita con motor Brushless, y le hago el adaptador a x20vteam de parkside con la impresora 3D. De todas formas gracias por el vídeo muy interesante igual que los otros que tienes en el canal. Me he suscrito.
Thank you very much🙏🙏🙏🤝🤝🤝
The video is from 1 year, and then they were hard to find.
I really liked your decision, and you did your best.👍
Hola ,tengo una radial igual ,pero se me han quemado los dos transistores,del control de velocidad,me puedes decir cual me sirven
Hello! I am looking for for the number of the outside transistor is it posible? thx.
Hello
His number is NCE40H12
But it also works with IRF3205
How is called the black piece on 3.19 which goes to motor and it is spinning the grinder? Or where can I get this black piece. Actually mine is broken on Parkside performance (black) angle grinder. On this angle grinder is orange colored if this matters.
This is a rubber pad that transmits the motion from the motor to the disc for smooth and silent operation.
If mine was broken I would cut some rubber piece and make 4 holes in it and that would solve the problem if you can't find an original piece🙂🤝
Hola tengo el regulador de corriente que está en la placa. Sabrías la numeración de esa pieza? La tengo rota y no soy capaz de reconocerla.
NCE40H12
But you can use the most common mosfet, for example IRF3205🙂
Do you have any ideea what motor i could use to replace a faulty one in a PASSK-20-li impact driver?
I don't know what they use for this one, but it should be like the angle grinder🤷♂️
No le pudiste conseguir un motor brushless?
cruzó por mi mente pero no puede encontrar el motor sin escobillas del mismo tamaño
Heloo
How open and connected the fan??!!!
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive.
After this procedure, you throw the old motor in the trash.
895 motor 24V alieexpres 15000 rpm alebo 20000rpm?
Hi I have problem with the transistor in the back. It's 💥 when I work with it.anf I can't read the name/type of this (PNP) transistor.can someone tell me the type for take another one. Best regards
I would like to buy tha same motor,can you send me a website were i can buy
There is a link in the description, but the power and rpm are very low compared to the original motor and it is not worth it. Must be a 20,000 rpm motor🙂
How to pull out the fan from old motor?
I wrote in the comments. you just put one side of shaft tips in a vise, and hit with a hammer
@@ErCanEverything so,first i must open the shaft ?
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive.
After this procedure, you throw the old motor in the trash.
At least I did so
@@ErCanEverything ok thanks
@@ErCanEverything If that high speed winding armature was saved somehow, could have been used on the new motor to speed it up? Just a thought 😉
Thank you! You helped my so much
🙂🙂🙂🍻
You tighten the old motor from the housing, and start knocking hardly on the back of the stator shaft until the whole shaft comes out. Then you unscrew the propeller and remove the drive.
After this procedure, you throw the old motor in the trash.
I wrote this in response, I don't know if you saw it? 🙂
@@ErCanEverything YES YES I got it now i just have to buy new motor in aliexpress. Thanks!
I am very glad to be able to help.
I think if people want, everything will happen. Just do it🙂
But the motors in Aliexpress are no more than 12 000 RPM.
Approximately 20 000 RPM is required for this. Mine was a little weak😔
Dove posso ordinare un motore così
Nella descrizione, ma questo motore è molto lento
Ho lasciato un link nella descrizione
Is this not much lower rpm than original motor?
Yes really the revs are low.
I ordered the wrong motor, at the end of the video I noted this.
Ah ok, have you a link to correct motor? What did you take the brushes from in your repair video?
@@rwdkai I haven't found the right motor yet. I used an old car fan brushes on my previous vodeo
@@ErCanEverything what motor exactly did you order?
You must order 895 DC Motor 20V 12000 RPM
But my is lower than 12000 RPM
Hello, you can give a link here where and from which dealer you bought the engine. Thanks
There is a link in the description of the video. But it cannot develop enough RPM.
I still couldn't find a high-speed engine.
th-cam.com/video/IQ_dAqkwy1U/w-d-xo.html
RZ-735VA-9515 mabuchı dc motor ama çok ısınıyor
Gracias por el vídeo!!
works, but the 895 motor is lower RPM and not enough power
carbon brushes of 895 can work in the 897 motor?
super
Low speed motor have more torque
ok
Thank You🤝❤