Buongiorno e Buon WEEKEND MAESTRO CHRIS. Complimenti per condividere con Noi queste PERLE di LAVORAZIONI MECCANICHE. W la MECCANICA, W IL CNC e le MACCHINE TRADIZIONALI 🤗🤗🤗🤗🤗🤗🤗🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️
I run the same machine at my job and I love seeing you running the part in the guide system. We always convert our to g code as my shop has not taken the time to level the machine regularly so we get tons of tapper all the time.
Nice work Chris. I've looked at the Seco th 1000 & 1500 inserts for hard and interrupted cuts. PVD Coating of a carbide but I couldn't find out of what. Apparently able to turn induction hardened shafting no problem...
So there is a small three jaw chuck being held with a 4 jaw chuck. Turn a small part. NOT! Large for most of us. For you a small part. Thank you for sharing. I always look forward to your posts. How about a site tour?
When you quote the job how many hours to turn all 4 parts? Different world today. I ran CNC at the end of my machinist career. We had scan-omatic tracing units on some of our big engine lathes and VTL's. I would make the templates on the Bridgeport. Only way I could machine a radius like the one on this part.
De très belles pièces avec les gros rayons, les phases de retournement et de centrage doivent être compliquées sans contraindre la piece. J ai aussi vu qu il y avait eu un revenu pour durcir et améliorer la résistance de la pièce. Serait-il possible de filmer une procédure de retournement et centrage de la pièce?
Always nice video chris!! I was wondering you always use coolant for your jobs?? On my side i only use it for finishing the inserts than to fail off more quickly when i put coolant during the rough did you have this issues? Keep up the nice vids! Those are mesmerizing
I was born and raised in Poland and that was probably the first thing I've learned in trade school. Here in the US we have to work with metric and imperial system all the time.
Buongiorno e Buon WEEKEND MAESTRO CHRIS. Complimenti per condividere con Noi queste PERLE di LAVORAZIONI MECCANICHE. W la MECCANICA, W IL CNC e le MACCHINE TRADIZIONALI 🤗🤗🤗🤗🤗🤗🤗🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️🙋🏻♂️
They look brilliant Chris!!! Love it wonderful work as usual thank you!
Lovely piece of turning and well filmed mate thanks for sharing 👍
Nice work! Enjoyed watching.
I run the same machine at my job and I love seeing you running the part in the guide system. We always convert our to g code as my shop has not taken the time to level the machine regularly so we get tons of tapper all the time.
I only convert to G codes when I know I'll be getting the same job again. The guide mode has very limited storage.
Damn pretty work there, thanks for sharing.
Excellent video. Loved watching it in action
Glad you enjoyed it.
Nice Work.
Awesome work, thanks for sharing. :o)
Very nice finish bro.
Nice work Chris.
I've looked at the Seco th 1000 & 1500 inserts for hard and interrupted cuts. PVD Coating of a carbide but I couldn't find out of what. Apparently able to turn induction hardened shafting no problem...
Bom dia amigão mais uma aula👏🏼👏🏼👏🏼
good work!! :)
It's beautiful
Every block of marble has a statue in it.
отличная работа
That first pass on the OD sounds like a European police siren 🚨
👍
Awesome job. That is not easy to do.
👍👍👍
So there is a small three jaw chuck being held with a 4 jaw chuck. Turn a small part. NOT! Large for most of us. For you a small part. Thank you for sharing. I always look forward to your posts. How about a site tour?
Um bom torneiro, por quentão de segurança, primeiro usina um lado da peça, para depois fixar na placa!
thanks for your videos
Could you share groove's cutting conditions?
Did you dial it in with a indicator before first run?
This Seco grade TH1000 are good for roughning too, or only for finishing hardened steel?
Nice work Chris .
How much was the ovality after hardness?
When you quote the job how many hours to turn all 4 parts? Different world today. I ran CNC at the end of my machinist career. We had scan-omatic tracing units on some of our big engine lathes and VTL's. I would make the templates on the Bridgeport. Only way I could machine a radius like the one on this part.
7:59 - Not nearly as tough as that +/-.0005" on the ~30" D. part a couple of weeks ago.
Dunno where that part goes, but I'll bet it fits.
De très belles pièces avec les gros rayons, les phases de retournement et de centrage doivent être compliquées sans contraindre la piece.
J ai aussi vu qu il y avait eu un revenu pour durcir et améliorer la résistance de la pièce.
Serait-il possible de filmer une procédure de retournement et centrage de la pièce?
Always nice video chris!! I was wondering you always use coolant for your jobs?? On my side i only use it for finishing the inserts than to fail off more quickly when i put coolant during the rough did you have this issues? Keep up the nice vids! Those are mesmerizing
Yeah, I use coolant most of the time, never had any issues.
Coolant should improve life of the insert and keep the part cool to help hold tolerance and add lubrication
May i ask what type of insert for the roughing operation and how round and concentric was the part thanks
0:18 , 10:35
Thanks
Great work. I spottet the 385H6, how well known is the ISO fits system in your part of the world? Here everyone learns how it works in tradeschool
Here where ?
@@kisspeteristvan germany
I was born and raised in Poland and that was probably the first thing I've learned in trade school. Here in the US we have to work with metric and imperial system all the time.
@@ChrisMaj yea i learned that year one in trade school. i heard some rumors that its not common in the US to know the ISO system? is that true?
@@MrLembnau Maybe if you only work imperial 🤔
How much time did the machining take overall ?
I don't remember. That was over a year ago.
A105 재질이군요
열교환기용 후랜지
4140
what does LG mean?
Ok verui gut steel
OMG! OMG! It's a rINg in a cHuCK! It'za GunNA DIStortZ!"
🙄🙄
Serious question: Any particular reason for the change from induction hardening to flame?
I have no idea why they did it.
Power failure?
Viet Nam my
Do czego służy taki element?
Trochę ciężko wytłumaczyć bez pokazania. Chyba muszę zacząć więcej nagrywać ze składania wszystkich podzespołów, tylko to że to nie mój departament.
I do helical gear, gear shaft,gear coupling etc..but I can't read your program 😂😂😂
It's a Fanuc manual guide conversational programming
@@ChrisMaj fanuc Oi-TD series manual to..
I used G75 X Z P Q R F,, REFACING
AND G71 FOR STEP WORK.
G71 P10 Q20 U W D F
that my CNC program format.
Why don't you use a CBN insert?
We don't do a lot of hard turning and these work pretty good for my needs.
@@ChrisMaj Seco TH1000 works great for removing hardened layer!
@@niekbaakman9379 they are more for finishing, or they can rough hardened steel?
I'm mori sekie operator
'
This is not cnc lathe
4:15 Sorry to disappoint you, but yes it is a cnc lathe.