I have had 2 of them both failed and froze up within about 20 hours of use. Very cheap product don't last worth a darn. The fella in California thaat sold it to me was as dry rude and made it most a parent that i probably misused the tool. Haha I am a professional carver back to my old faithful dremel. It said in there patent that you need to put wd40 in line. Sorry but 600 bucks later and I still bond have a good micro carver.
Hey Ian! Very good actually. I love it and it works great, but to be honest I don't use it as much as I should. The Dremel is what I started with so it's hard to transition to something new even though its better is some areas.
The highest you should run it is at 42 PSI. Just as long as your air compressor has at least a 2-CFM rating it will work. At first I though I would have to get a special air compressor to use with the carver but the one I have works just fine. Most air compressors have a gauge where you can regulate the output of the air pressure.
Ama artist.. i do have a cabinet for glass etching, i made myself.. i make glass and mug etching.. but im using sandblasting method.. i am tired of wearing mask goggles and gloves due sand ash.. i want to used that hogh speed turbo carver but very high price.. its almost 20k php.. if the time that do not used your turbo carver.. can you donate that to me.. lol..
➝ SKULL CARVING TOOLS I USE
★ Dremel 4000 amzn.to/2tBKq2H
★ Flex Shaft amzn.to/2IENLIO
★ Adjustable Chuck amzn.to/2Xqp7if
★ Respirator amzn.to/2H0W3Z7
★ Ear Protection amzn.to/2H7DIJI
★ Ball Carbide Burr amzn.to/2H3jkJU
★ Inverted Cone Burr amzn.to/2EwHr1P
★ Cylinder Carbide Burr amzn.to/2EwmofT
★ Tungsten Steel Carbide Burr amzn.to/2EuQEYs
★ Diamond Dust Burrs amzn.to/2TeFbVg
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➝ SKULL CLEANING TOOLS
★ Aquarium Heater amzn.to/2EdGNoM
★ Mesh Bags amzn.to/2VRQ4cM
Some links above are affiliate links!
Want to learn skull carving? Here is a free 7 page guide to show you exactly what you need to get started
usskullhunter.ck.page/bd2b65322a
How are you liking it? really want to buy one asap!
I have had 2 of them both failed and froze up within about 20 hours of use. Very cheap product don't last worth a darn. The fella in California thaat sold it to me was as dry rude and made it most a parent that i probably misused the tool. Haha I am a professional carver back to my old faithful dremel. It said in there patent that you need to put wd40 in line. Sorry but 600 bucks later and I still bond have a good micro carver.
There a pile of junk.
@Hunter, how are you finding the Turbo carver?
Hey Ian! Very good actually. I love it and it works great, but to be honest I don't use it as much as I should. The Dremel is what I started with so it's hard to transition to something new even though its better is some areas.
Looks awesome, can you tell me where you bought it?
Hey Dr. Vassall, sure thing! www.turbocarver.com/?gclid=CjwKCAiAksvTBRBFEiwADSBZfNfbmhN-1U6aD0pe6-ibg_9AnYksovbrIxJDxFtO38duAooQbwN0khoC1NQQAvD_BwE
U.S. Skull Hunter thanks!
How many air pressures do you need to operate?
The highest you should run it is at 42 PSI. Just as long as your air compressor has at least a 2-CFM rating it will work. At first I though I would have to get a special air compressor to use with the carver but the one I have works just fine. Most air compressors have a gauge where you can regulate the output of the air pressure.
Thanks for the quick response!
Ama artist.. i do have a cabinet for glass etching, i made myself.. i make glass and mug etching.. but im using sandblasting method.. i am tired of wearing mask goggles and gloves due sand ash.. i want to used that hogh speed turbo carver but very high price.. its almost 20k php.. if the time that do not used your turbo carver.. can you donate that to me.. lol..
keep up the great content #mourningwolf