You always make great videos and explain really well Thanks Francisco keep up the good work. been mechanic for a while and I have learned a lot from your videos.
Thank you for all your video's I love this one it explains everything. I have had to replace several of these, and I have been meaning to take one apart to see what went wrong. You did it for us. Love your videos thank you very much for sharing your knowledge.
Thanks for the great information. I have had this exact issue with my Freightliner and am positive that you have identified the problem. I have passed on your video to my mechanic. Great video and so informative.
excellent video and information. I am having this driving shut down problem and probably need this part.. like you, I wanted to know what was causing it and why it happened.. will take extra precautions to seal this unit up.. silicon or something similar to keep all the water out should give extra life and prevent a repeat situation.. thanks again
I had the same problem for my truck I would turn off the truck but the clearance lights would stay on for some minutes and kills the battery. I had to change it and the new ones look totally different but it works well. Good observation
Excelente video, yo cambie el mio y me empezó a hacer lo mismo a las 900 millas de cambiarlo (apagarse y encender en unos segundos) halguna idea si puede ser otra cosa? O tendra defecto el nuevo pdnd? Lo compre nuevo en la freightliner. Gracias
Francisco Thank you very much for this video. I am having an issue and believe this is the problem. However, If so, I would like to know how to bypass it long enough to get to a shop for repair. Do you have a video on how to bypass?
Hey men en un motor dd15 de la Mercedes ? X que si ya cambié el purgador y todo el pedo del secador no tengo fugas de ningún lado del camión pero aún así logro que el secador o la purga de escupe no descansa ? Que me recomienda a seguir muchos saludos y Bendiciones x tanta sabiduría y enseñanza
I just had this problem and when i touch the thick red wire on the lefy of the box it does that clicking sound and i loose all power to the truck. The power loss problem started after i hit a pothole so i guess smthng inside that box broke or got loose.
The one on my truck is failed but only after using the power cut off switch. It cuts off a few times but then stays on. I never turn off my batteries now. I’ve had my truck on for 3 weeks in very cold weather and the batteries stayed over 12v.
Hi Francisco Great video! Question for you. When I turn off my 2015 freighter about a minute later it shuts down all 12v power. My batteries and cables are all good. Can PNDB shut all power off even when truck is not running? It’s like when you turn off disconnect switch but my switch is still on.
Buen video brother eso tiene un nombre no laves el motor con precion de agua el truck wash se queda en una equina con esa precion de agua y el selló no aguanta agua a esa precion y falla
Francisco eso me Podría dar problemas con el aire acondicionado ? Tengo un dd15 2013 cascadia ac compresor prende, abanico prende fusibles están bien cambie el cab filter, le cambie el Blower y no avienta nada de aire. Lo que note es que el switch que se conecta al Blower no llega nada de corriente
Hello! Will the PNDB cause MCM System ID not receiving Stopping or Arriving? My 17 freightliner randomly shut off while driving or idling. PNDB is new replaced.
My Frightliner just failed to start from a truck start after I put diesel . I checked and replaced some fuses I dint trust ,cleaned my battery’s and later it stated . I scared to keep driving cause it hasn’t happened again. Can I replace the PDM
Francisco, tengo un problema con cascadia 2015, El CPC no se quiere comunicar con la computadora de motor, no sale voltage de comunicacion, Sera El CPC o otra cosa?? Le llega voltage Al CPC y tiene Tierra.
I had a bad experience in a Freightliner 2015. The accelerator pedal doesn’t work despite its being changed. When the technician checked it the found power and ground but it’s seems there’s no communication with the computer.CPC
the fault that a ddec 13 had is that it does not accelerate and said that the fault code is SPN 625 FMI 8 and the mechanic told me that I had to change the pdm module, it has some relationship if you can help me I would appreciate it
Hello Francisco I got dd13 cascadia 113 2016, my dashboard sometimes goes up and down c every single one on dashboard , then it shows check engine and abs , when I turn off truck and back on , all the check engine and abs comes off, what can cause that ?
Hola Francisco tengo un cascada 2011 y me esta haciendo es que salgo caminando y de pronto se me acelera el camión y después se me apaga por casualidad sabes que pueda ser ayuda me con eso gracias
i have a question for you.. For my 2013 freightliner cascadia my pndb box is model a06-75148-011 But i cant find a new one Can i use the 2014 version model number a66-03714-009 the last 3 numbers on the end are 009 and the last 3 numbers on my box is 011 They look exactly the same to me... Anyone know if it is ok to use the other 2014 model pndb box ending in 009 instead of my originial ending in 011. THANKS IN ADVANCE FOR ANY HELP
Francisco, I have a question for you about a engine rebuild failure after rebuild there was a squeaking squealing sound , tore back down found upper/lower bearing slightly scored - tore down replace, restart same sound - tore back down dont see any issues have you experienced a issue like this before??
I need your help my 2012 Freightliner cascadia headlights staying on with the switch off and the hazard button light just flashing I have no cruise control button no jake brake button no indicators no windshield wiper power
Do you have a video of the Obed not having power I have a 2014 Freightliner cascadia and I got no power to my gauges it’s says No Databus communication and no power at the obd2
Hello, I have a 2019 Cascadia freight liner with DD15 Engine and 390,000 miles on it. When the check engine light turns on, the AC, cruise control, lane keep assistant and diagnostic buttons don’t work. When the check engine light turns off, they start working normally. It has been like this since the time I got it new. It would turn on for 15-30 minutes and be okay after. Then it started happening 2-3 times a day. Now it’s always on and I’m having a tough time. Have any of you guys encountered this before? I’d appreciate some insight or help regarding this matter.
Hey Francisco, my 2008 cascadia do not have pndb, and the truck sometimes turn off it self when i driving....i replace the sam chassis reprogrammed and nothing fix the problem😢 ..any idea?
Hello Francisco i don't know where else to ask you this question, so i hope you see this. My 2018 freightliner cascadia wont crank. I replaced the starter 4months ago. I watched your video on pumping the clutch while starting, i tried tapping the starter nothing worked. I ended up calling roadside. Mechanic showed up disconnected negative battery connections for 30sec pumped break paddle 10x connected battery back up, truck started. But now everytime i turn off the engine it wont start back up. What is the problem with the truck? Thanks
Hola Francisco m hfn ayudado mucho tus videos quisiera preguntarte si hay posibilidad q haiga más videos en español t lo agradecería mucho saludos desde Querétaro Méx.
@franciscoamaya7095 thank you for your response ! I'm having problem with a dd15 brings as fuel rail pressure low but unplugged the caps and there is fuel...back of the rail there is fuel...filters there is fuel...means fuel pump is good check the fuses batteries starter even starting fluid checked fuses on pndb box and the other fuse box tried a the emc in another truck and started right away means is not the ecm checked with another cpc4 and nothing and still won't even crank or jump start changed the fuel rail pressure sensor and still won't even crank to start 👎 I'll go for the engine harness? 🤔 your videos are very helpful...thanks for letting us know
@Along Wang hello friend i ended up changing all injectors and that fixed the problem about a month and a half ago starts normal now but depends what kind of codes you get from your truck
Thank you very very much I know what's wrong with my truck and the light . My headlights and taillights won't turn off and the inside light don't want to work in the bunk .oh and my batteries won't charge more than 12.8
Freightliner needs to put the PNDB on saftey recall. If this part shuts the truck down while traveling down the road that's a hazard and saftey issue
You are very good and honest technician God bless you,
You always make great videos and explain really well Thanks Francisco keep up the good work. been mechanic for a while and I have learned a lot from your videos.
Thanks Francisco, just started having this problem. Glad to at least know why, even though I'm not real happy about having to replace it. Great video!
Thank you for all your video's I love this one it explains everything. I have had to replace several of these, and I have been meaning to take one apart to see what went wrong. You did it for us. Love your videos thank you very much for sharing your knowledge.
Thanks for the great information. I have had this exact issue with my Freightliner and am positive that you have identified the problem. I have passed on your video to my mechanic. Great video and so informative.
Thank you very much for your hard work and your patience to explaining the cause and the solution to the problem.
I appreciate your ambition. And wisdom. Much respect!
Thanks!
My lights where flashing on and off, now my truck won't start.
I'm gonna check this module...
Thanks for the video..
Did the part fix it? Having similar issue
thank you for our eye open to the PNDB module keep up the good work thanks again
Mucha gracias brother me Ayuda su video q Dios le Bendiga
excellent video and information. I am having this driving shut down problem and probably need this part.. like you, I wanted to know what was causing it and why it happened.. will take extra precautions to seal this unit up.. silicon or something similar to keep all the water out should give extra life and prevent a repeat situation.. thanks again
Francisco....
Gracias Hermano
Rogelio
Freightliner is known for leaky windshield. Probably the water makes its way down to the PDM from behind the dash
I had the same problem for my truck
I would turn off the truck but the clearance lights would stay on for some minutes and kills the battery. I had to change it and the new ones look totally different but it works well. Good observation
Good Observation Ken....
That Is A Strong Possibility Where That Water Came From
I notice when it rains I start having electric problems
Excelente video, yo cambie el mio y me empezó a hacer lo mismo a las 900 millas de cambiarlo (apagarse y encender en unos segundos) halguna idea si puede ser otra cosa? O tendra defecto el nuevo pdnd? Lo compre nuevo en la freightliner. Gracias
Excellent videos! Thank you for what you are doing!
Just what I needed to see, thank you Francisco
I think I'm experiencing this issue right now on a 2023. Freightliner Cascadia.
Hey,,Francisco, can u bypass it to double check..
Francisco Thank you very much for this video. I am having an issue and believe this is the problem. However, If so, I would like to know how to bypass it long enough to get to a shop for repair. Do you have a video on how to bypass?
Thanks Francisco!
Hi great video can you make a video and how to bypass it and how to run the cables to it I’m having problems with that thank you God bless
Thank you for your good job
Very good video! Thanxs for your time
Hi Francis, are you able to post the board top and bottom pictures. Need to see the wiring and components please. Thanks
Man, I just wanted to thank you!
Francisco: Would a "factory installed" desiccant packet perhaps help absorb moisture inside this contraption???
Hey men en un motor dd15 de la Mercedes ? X que si ya cambié el purgador y todo el pedo del secador no tengo fugas de ningún lado del camión pero aún así logro que el secador o la purga de escupe no descansa ? Que me recomienda a seguir muchos saludos y Bendiciones x tanta sabiduría y enseñanza
Good work brother! Thanks for the video!
I changed the main one like 50k miles ago them switched the aux one yesterday my truck was turning of and not coming back on
Thanks again Francisco
Thanks. It’s good to know now what it does. I think this is just useless electronics. It should be a normal power switch on top of the batteries.
Well, there you have it. Get yourselves a tube of silicone glue and start sealing the PDM before water gets in
The problem is water from the windshield if the one on your truck is under the dash.
That don't work. Ive had to change two out
If I use dielectric gel in the holes and then plug in all the wires, would that keep water out of the PNDB?
I just had this problem and when i touch the thick red wire on the lefy of the box it does that clicking sound and i loose all power to the truck. The power loss problem started after i hit a pothole so i guess smthng inside that box broke or got loose.
The one on my truck is failed but only after using the power cut off switch. It cuts off a few times but then stays on. I never turn off my batteries now. I’ve had my truck on for 3 weeks in very cold weather and the batteries stayed over 12v.
The one with the alt remote sense, if its bad will that cause alternator not to charge batteries
Hola , saludos desde Colombia , de casualidad tiene este video en español.
You’re awesome dude thank you
Great video brother keep it going
Hello Francisco, I am having issues with this item, I already replaced and still having the issue, how else I can contact you?, thank you
Hi Francisco
Great video! Question for you. When I turn off my 2015 freighter about a minute later it shuts down all 12v power. My batteries and cables are all good. Can PNDB shut all power off even when truck is not running? It’s like when you turn off disconnect switch but my switch is still on.
😮thx you Sir we appreciate you
Buen video brother eso tiene un nombre no laves el motor con precion de agua el truck wash se queda en una equina con esa precion de agua y el selló no aguanta agua a esa precion y falla
Very good video 👍👍👍🇨🇦🇨🇦🇨🇦🇨🇦
Hola esta parte puede ser el problema para que las luces del domo en mi cabina no funcione
Francisco eso me
Podría dar problemas con el aire acondicionado ? Tengo un dd15 2013 cascadia ac compresor prende, abanico prende fusibles están bien cambie el cab filter, le cambie el
Blower y no avienta nada de aire. Lo que note es que el switch que se conecta al
Blower no llega nada de corriente
This is a Good tópic. Why it fáciles? Thank you.
Hello on my Freightliner bake lights stay on when brake pedal released so is this module has to be replaced?
Hello! Will the PNDB cause MCM System ID not receiving Stopping or Arriving? My 17 freightliner randomly shut off while driving or idling. PNDB is new replaced.
I’m getting high battery voltage changed alternator checked remote sense fuse should
I overlay or replace pin ?
I appreciate your videos
I replaced the PDM
And the truck Freightliner will still stop and dying power the same
What other reason you think?
Is it normal for the red light to be on my pdnb box while I am parked with engine shutoff
Hi Francesco. Great videos.
I wonder if I can bring my truck to your shop. I have same issues and others. Are you in California, what city?
My Frightliner just failed to start from a truck start after I put diesel .
I checked and replaced some fuses I dint trust ,cleaned my battery’s and later it stated .
I scared to keep driving cause it hasn’t happened again.
Can I replace the PDM
will this cause my dome lights to not turn on?
Francisco, tengo un problema con cascadia 2015, El CPC no se quiere comunicar con la computadora de motor, no sale voltage de comunicacion, Sera El CPC o otra cosa?? Le llega voltage Al CPC y tiene Tierra.
I had a bad experience in a Freightliner 2015. The accelerator pedal doesn’t work despite its being changed. When the technician checked it the found power and ground but it’s seems there’s no communication with the computer.CPC
Need to fix your cpc4.
Cpc4 needs reprogramming
How to tell if a pndb is going bad
Coz I have 2 in my truck one with Aux pndb with c/o is blinking
Hey francisco me gustaria saber si tienes conocimiento sobre por que el APu pak smart no prende el compresor
did you find out i’m having same issues with apu heater
the fault that a ddec 13 had is that it does not accelerate and said that the fault code is SPN 625 FMI 8 and the mechanic told me that I had to change the pdm module, it has some relationship if you can help me I would appreciate it
Thanks so much 🙏
Does this the reason. My truck won’t start after a engine wash out?
Hello Francisco I got dd13 cascadia 113 2016, my dashboard sometimes goes up and down c every single one on dashboard , then it shows check engine and abs , when I turn off truck and back on , all the check engine and abs comes off, what can cause that ?
PNDB la caja puede dañar el alternador
Is this a plug and play part or is there programming needed?
Plug n play.
Hola Francisco tengo un cascada 2011 y me esta haciendo es que salgo caminando y de pronto se me acelera el camión y después se me apaga por casualidad sabes que pueda ser ayuda me con eso gracias
Francisco I had the same problem so i changed the pndb but my amber light is still on. Can you tell me why.
i have a question for you.. For my 2013 freightliner cascadia my pndb box is model a06-75148-011 But i cant find a new one Can i use the 2014 version model number a66-03714-009 the last 3 numbers on the end are 009 and the last 3 numbers on my box is 011 They look exactly the same to me... Anyone know if it is ok to use the other 2014 model pndb box ending in 009 instead of my originial ending in 011. THANKS IN ADVANCE FOR ANY HELP
Thanks a lot.
Thanks Amaya
Tengo un cascadia 2010 k no me prende el check engine y no se escuchan los releis de afuera solo los de adentro de la cabina y no enciende
Thank you.
Im having a problem with all my outside lights not turning off.
Light on that part is blinking not solid it that mean bad ,
Good information
Francisco, I have a question for you about a engine rebuild failure after rebuild there was a squeaking squealing sound , tore back down found upper/lower bearing slightly scored - tore down replace, restart same sound - tore back down dont see any issues have you experienced a issue like this before??
I need your help my 2012 Freightliner cascadia headlights staying on with the switch off and the hazard button light just flashing I have no cruise control button no jake brake button no indicators no windshield wiper power
Replace the sams chassis
Is this part on the 2020 cascadia
Thank you
I’ve replaced 3 of the damn boxes in less than 3yrs at 350.00 a pop horrible design from FreightLiner I meant Mercedes Benz..😡
Do you have a video of the Obed not having power I have a 2014 Freightliner cascadia and I got no power to my gauges it’s says No Databus communication and no power at the obd2
Did you ever figure out what the problem was? I'm dealing with this issue now.
Can this also cause the ac not to work?
Do you have use or new cpc for 2016 dd15 .v# GXOO59
Hello, I have a 2019 Cascadia freight liner with DD15 Engine and 390,000 miles on it. When the check engine light turns on, the AC, cruise control, lane keep assistant and diagnostic buttons don’t work. When the check engine light turns off, they start working normally. It has been like this since the time I got it new. It would turn on for 15-30 minutes and be okay after. Then it started happening 2-3 times a day. Now it’s always on and I’m having a tough time. Have any of you guys encountered this before? I’d appreciate some insight or help regarding this matter.
hi did you find solution to your problem i ha ve the same issue in freightliner 2018 ,i really appreciate any comment on this matter thx
Thanks dear
Al reeplazar esa parte se necesita reprogramar?
No
Good video
Hey Francisco, my 2008 cascadia do not have pndb, and the truck sometimes turn off it self when i driving....i replace the sam chassis reprogrammed and nothing fix the problem😢 ..any idea?
Hello outlander what solve you problem ?
@@moisesuribe3842 electrician are working for a month back and forward with all computer, wire problems and programing....frustrating
Buenas tardes podría ponerlo en español gracias
Thanks
Hello Francisco i don't know where else to ask you this question, so i hope you see this. My 2018 freightliner cascadia wont crank. I replaced the starter 4months ago. I watched your video on pumping the clutch while starting, i tried tapping the starter nothing worked. I ended up calling roadside. Mechanic showed up disconnected negative battery connections for 30sec pumped break paddle 10x connected battery back up, truck started. But now everytime i turn off the engine it wont start back up. What is the problem with the truck? Thanks
I have a 2011 Coronado with a dd15 it turns off and won’t start. Oils be the same problem. I haven’t figured it out yet
Did you ever figure out was the problem I am having the same issue thank
@@punjabipunjabi12 hello bhaji did you figured issues i’m having same problem with truck now
Hola Francisco m hfn ayudado mucho tus videos quisiera preguntarte si hay posibilidad q haiga más videos en español t lo agradecería mucho saludos desde Querétaro Méx.
Exacto%. Hazloen español. Y caption. En ingles: quieted practicar tu ingles.sabemos.
Maybe this is why I shouldn’t wash my engine anymore ?? Thank you 🙏🏻🙏🏻🙏🏻
This mostly happens on winter but it is better no to power wash your engine bay.
👍👍
Does it have something to do with starting the truck ?
if there is not power in the whole truck, yes.
@franciscoamaya7095 thank you for your response ! I'm having problem with a dd15 brings as fuel rail pressure low but unplugged the caps and there is fuel...back of the rail there is fuel...filters there is fuel...means fuel pump is good check the fuses batteries starter even starting fluid checked fuses on pndb box and the other fuse box tried a the emc in another truck and started right away means is not the ecm checked with another cpc4 and nothing and still won't even crank or jump start changed the fuel rail pressure sensor and still won't even crank to start 👎 I'll go for the engine harness? 🤔 your videos are very helpful...thanks for letting us know
@@sircarlosbarra6733 Hello! Has ur issue solved? I ‘am experiencing the same on my 17 freightliner. Engine harness replaced won’t work.
@Along Wang hello friend i ended up changing all injectors and that fixed the problem about a month and a half ago starts normal now but depends what kind of codes you get from your truck
@@alongwang3582 is your truck deleted ?
Thank you very very much I know what's wrong with my truck and the light . My headlights and taillights won't turn off and the inside light don't want to work in the bunk .oh and my batteries won't charge more than 12.8
Estaría bien que hicieras este video en español saludos Francisco
Porque no Hablas español?
En español porfavor