Voge 900 DSX Handle bar modification

Hi guys, Finally got around to fitting bar raisers up and backwards to the Voge. It makes a huge difference on the stance of the bike i advise rolling the bars forward and adusting the mirrors, brake and clutch lever after fitting. the parts are from Aliexpress link below. parts for BMW f850GS. i re jigged the bars after a test ride hence the addition at the end. Ride safe guys.
Just found this amazing item on AliExpress. Check it out!
17,97€ | Handlebar Riser Clamp Back Move Mount For BMW F900R F900XR F900 R XR Motorcycle Accessories F850GS F 850 GS Adventure ADV
a.aliexpress.com/_EzRbeJV

[@quickjan]

Hi Paul, thanks a lot for your video, I follow them as they come, so keep them coming :). My DSX will come in September maybe, but I already ordered parts as you recommended - risers and engine covers 🙃

[@MrPriba91]

Hey, just wanna share with you how lucky I was when I ordered my dsx. In dealership they told me that first available bike will be at the end of the year, and while I was there someone canceled his order, so I took it. That was last week and I'm expecting my bike tomorrow XD

[@motechRevolution]

It rides and handles superbly. I think the points I mentioned in an earlier video will iron themselves out with a map update and running in. Thanks for commenting ✌🏻

[@christopherlynch235]

Great video,thanks for the updates on your experience with this new model.Superbly informative and insightful. Great bike at an excellent price point.Unreal.

[@ivanrushtonthelonewolfrides]

Great Video mate im thinking of putting some on my CF Moto MT800 Explore as you just need to crouch when standing

[@motechRevolution]

Had the same experience on the Voge, I was hunched over standing.

[@alenfora1400]

So are you happy with your bike and much kilometers so far

[@Pacollons86]

Hola Paul, son de fiar los tornillos qué traen las alzas o mejor sustituirlos?
Y a que par de apriete los montaste?
Gracias

[@motechRevolution]

Son de buena calidad, utiliza los que vienen con las bandas ya que no agarran el manillar. Utilice los pernos originales en las secciones superiores del manillar original. apriete a un par de 10 nm

[@Pacollons86]

@@motechRevolution Muchas gracias por contestar y por los videos Paul. A disfrutar de nuestra Voge 900DSX

[@Pacollons86]

Paul, hemos revisado el manual y dice que el apriete del manillar va a 24 N , por si quieres repasarlo. Me enviaron en el grupo de Telegram.
Saludos

[@jmvicentemendes]

Is 30mm the maximum for the cables to have a good clearance /slack or, can we buy for example a riser with 55mm?

[@motechRevolution]

I'm not 100% certain but if you unclip the cables further down maybe, it might involve removing the tank though.

[@filipedl251]

Hello
I have just a question, what do you think about the material quality of these risers.
Thank you so much
Filipe from France

[@motechRevolution]

They seem good quality Aluminium not sure what grade, but the threads were good and didn't feel soft like some I had in the past, no bad feeling when torquing up. Although they are under €20 on AliExpress they don't look cheap and also look very clean on the bike. I would recommend them

[@filipedl251]

@@motechRevolution ok thank you for your response

[@Carlosguca539]

Many thanks and congrats for your video. I got mine 2 weeks ago, and was thinking about fitting the handlebars raiser. After watching your video, I am now less afraid to do it on my own.
I did not get what you mentioned about the headstock and which cable to cut.
If you wish to have a ride around Alicante please let me know.

[@TAZZZBOY]

You are riding it on the softest set-up on front?
It is too Soft for me, I have hardened it on 2 lines

[@motechRevolution]

Yes I've softened mine up purely for our local roads they are brutal. Main highways and A roads are good, not a route I would have gone down on my super sports bikes of the past. But needs must especially with the wife on the back 😁

[@manosde]

Running hot with that compression ratio is normal I guess

[@motechRevolution]

Yes, most definitely the reason. ✌🏻

[@jerzykorol6785]

Hi, how tall are You?
👍👍👍👍👍👍

[@motechRevolution]

Hi I’m 5’10” or 178cm

[@bobanppvc]

To small for me im 197...Even if i get seat and bars higher tft is too low...

[@motechRevolution]

The seat has a very low dip, word is Voge are bringing out much higher seat options.

[@bobanppvc]

@@motechRevolution even with higher seat tft stays low and you need taller handlebars...

[@motechRevolution]

I've put lifters on mine but if you wanted more aggressive handle bars you could always put some Renthal bars on it. Although last time I took mine on a trail standing up it was fine.