IMPORTANT NOTE: When placing back the fuel pump on the gasoline tank, first place fat outer rubber seal on the gasoline tank first before sliding in the fuel pump assembly in. There is an inner lip on the fat rubber seal that will get caught and will rip when tightening the big ring if you install the fuel assembly with the big rubber seal on the fuel assembly. If the big rubber seal rips, you will get a check engine code P0456. Once the big rubber seal in on properly set on the gasoline tank, it is easy to put the fuel pump assembly all the way on the seal, holding it in place with one hand and the other hand you can place the green plastic washer and the big ring. And while holding the fuel pump with one hand, you can start tightening the big ring until the blue mark. Don't ask me how I know this...
I won't ask how you know because it's currently happening to me, but did you also have any issues with fuel dashboard meter misreading the actual amount of gas in the tank? My tank is empty yet my meter sits at the first line after the letter "E". I know this bc my car shuts off exactly at that line and it turns on only after I pump some gas. Happened to me 2 times until I made the connection.
Wow, this made a huge difference in the performance of my 2013 FRS. Night and Day...Now I have a significantly more powerful FRS at all RPMs. Thanks for the details on installation.
Is it absolutely necessary to use the Deatschwerks sock or is there a way of making the AEM one work? I intended on soldering the wires, so I didn't buy the DW install kit
GT86 IS the simplest to maintain. Is like the designers were actually meeting up with mechanics to figure out simpler ways for DIYers. The engine oil(even with top mount filter), the transmission fluids, diff fluid, wheels, suspension, headlights(front ones are the pain for the clips but easily doable), dash updates, ETC.
if you buy the Deatshwerks DW65C fuel pump, will you need to cut the sock off still as it is shorter? Will all that be required is to just swap the wiring harness?
Why would someone do this to their stock car/engine? Pointless to do the pump and the flapper/trap door is only needed if you generate serious G's on the track.
An X-Acto saw or similar fine-toothed blade would be neater than melting through it with an abrasive disc. Don't use a screwdriver and hammer! You can easily make a wooden tool to span the top so opposing ears can be used to loosen and tighten the ring. Using pliers' handles with a C-clamp to lock it solid and act as a handle is another trick. Lastly, the black goo should provide a seal or use a silicone sealant. It's there to keep fumes and liquids out of the cabin.
@Fr-sOmar my mechanic works on Subaru engines and fuel pumps and he say the entire pump and regulator needs replacement you can upgrade t9 the worx 9ne in this video and never have to deal with it again I sold my frs in 2020 .
i bought a walbro 485 fuel pump and it seems to be too tall for the three clips that keep the fuel pump in place to the canister to clip down. is this normal?
Po Russki I got mine off of my warranty as well - there is a slight chirp every once in a blue moon but that goes away in 1-2 secs. Take it in to your dealership to have that taken care of under your warranty.
Emmanuel Rovirosa at the very least a voided warranty and the possibility the door sticks shut and does not allow any fuel in. doubt it would happen but went to the store and saw quite a huge price tag on the door. i think i will just stick with the fuel starvation i never noticed before (for now).
Jason Cheng, yeah looks like it in the vid too, so even more reason to really consider if this mod is necessary. for a track car i couod easily see it being a yes but as i said before, probably not for me (at least not right now)
It's been a long time since my Japanese classes, but IIRC he's technically correct. In Japanese, the car is referred to as hachi roku, which translates as "eight six." If it were eighty-six, it would have been hachi ju roku. Seems like you're the one saying it wrong, so you should find yourself annoying instead.
![Fuel Pump upgrade frs/brz/86 [Walbro 485]](http://i.ytimg.com/vi/ROCu0QJQBJY/mqdefault.jpg)
IMPORTANT NOTE: When placing back the fuel pump on the gasoline tank, first place fat outer rubber seal on the gasoline tank first before sliding in the fuel pump assembly in. There is an inner lip on the fat rubber seal that will get caught and will rip when tightening the big ring if you install the fuel assembly with the big rubber seal on the fuel assembly. If the big rubber seal rips, you will get a check engine code P0456. Once the big rubber seal in on properly set on the gasoline tank, it is easy to put the fuel pump assembly all the way on the seal, holding it in place with one hand and the other hand you can place the green plastic washer and the big ring. And while holding the fuel pump with one hand, you can start tightening the big ring until the blue mark. Don't ask me how I know this...
I won't ask how you know because it's currently happening to me, but did you also have any issues with fuel dashboard meter misreading the actual amount of gas in the tank? My tank is empty yet my meter sits at the first line after the letter "E". I know this bc my car shuts off exactly at that line and it turns on only after I pump some gas. Happened to me 2 times until I made the connection.
I really dig how in depth this installation was. Thanks guys 👍
Damn this video really helped me out i was holding out doing the fuel pump upgrade, made it look really easy.
Wow, this made a huge difference in the performance of my 2013 FRS. Night and Day...Now I have a significantly more powerful FRS at all RPMs. Thanks for the details on installation.
What does this upgrade do specifically.? Can I just upgrade the gas pump without needing any turbo or supercharge???
does the black adhesive holding the whole assembly in the fuel tank need to be replaced after this install?
No I've taken my fuel pump out multiple times, it still holds fine.
Just dont f*ck up and get gas on it. I dropped the ball on this part and it melted all that adhesive.
Will this fix fuel pump sensor i got.
Is the fuel pump in the 2020 brz updated so I wouldn’t have to do this?
Is it absolutely necessary to use the Deatschwerks sock or is there a way of making the AEM one work? I intended on soldering the wires, so I didn't buy the DW install kit
Thank you for the video, but is GT86 or BRZ cheap to be maintained)?
Expensive like a lambo, jk
yeah i recently thought about this too
GT86 IS the simplest to maintain. Is like the designers were actually meeting up with mechanics to figure out simpler ways for DIYers. The engine oil(even with top mount filter), the transmission fluids, diff fluid, wheels, suspension, headlights(front ones are the pain for the clips but easily doable), dash updates, ETC.
but if u looking for something cheaper than that. stick to a corolla, pref a 2010 and down models.
It would be awesome if you could provide me the link to where i can buy the same spoiler from the video.
www.ft86speedfactory.com/sard-lsr-style-carbon-fiber-wing-2013-fr-s-brz.html#.WZHeo4Tyurw
FT86SpeedFactory thanks a bunch!
Can I use the DW install kit for an OEM pump
Is this applicable on the 2022 model ? I am experiencing sluggishness after the fuel is less than 50%.
Are these the same steps and parts to use for the FA20 WRX?
can use that with the stock fuel injector?
I was going to do this till i heard 10mm socket....
Yeah all that's IF you even find the 10mm socket 😂
TS Ryder I was just about to comment that😂😂😂
What’s the blue line for?
if you buy the Deatshwerks DW65C fuel pump, will you need to cut the sock off still as it is shorter? Will all that be required is to just swap the wiring harness?
You will still need to cut the stock fuel filter (fuel sock) clip with the Deatshweks fuel pump.
just ordered all the parts :)
Is it normal to be able to hear the petrol swooshing around behind me on full tank when I'm driving not sure if it's lack of sound deadening
Stefan Christian mine does that too its just lack of sound deadening from factory lol
I drive Toyota 86 and I never hear that, my car is so god damn loud lmao 🤣 it’s louder then my stereos on max.
@@yettiman8941 hahaha I made my car louder and crank the stereo every single drive just to avoid hearing the rattles in this car
Thx
If I do this to my stock frs will there be promblems ?
Why would someone do this to their stock car/engine? Pointless to do the pump and the flapper/trap door is only needed if you generate serious G's on the track.
Is that "sock" the "fuel filter" that needs to be changed every 6 years / 72k miles?
JP yes
No. That’s not the filter. It’s the white plastic part that the motor sits insides.
Will this work on a mazda rx8 2005
Do we not need to reseal the access port?
Nope.
So if I get the DW and the DW fuel pimp I use all 3 O-rings on top of the white plastic tube bit, right?
Same is it two or 3
Would this also get rid of the chirping noise?
don’t think so. the chirping i believe comes from the port injection
hi , what do u call the green o ring thats on the cap when u took it off pls, ? around 2:30/9:04 thank u
An X-Acto saw or similar fine-toothed blade would be neater than melting through it with an abrasive disc. Don't use a screwdriver and hammer! You can easily make a wooden tool to span the top so opposing ears can be used to loosen and tighten the ring. Using pliers' handles with a C-clamp to lock it solid and act as a handle is another trick.
Lastly, the black goo should provide a seal or use a silicone sealant. It's there to keep fumes and liquids out of the cabin.
Can you guys update your links please!!
Is the fuel filter built into the fuel pump in these cars?
jacob augustin no it’s part of the assembly. It’s the piece that the pump was inside of.
I had a code of P0087 what part of the fuel pump I need to replace just the fuel pump or the whole fuel kit
The regulator is the p0087 code
@@soepicgamesNot sure if you will see this, but how did you get the code? What were the symptoms?
@Fr-sOmar my mechanic works on Subaru engines and fuel pumps and he say the entire pump and regulator needs replacement you can upgrade t9 the worx 9ne in this video and never have to deal with it again I sold my frs in 2020 .
@@soepicgames is the regulator easy to remove? Is it as easy as the fuel pump?
Any update of what was the issue?
I put a brand but I did not put the bottom LED DW
Man Tom should use some gloves lol.
Tom a real nigga he dont need gloves
how much horsepower does and torque?
i bought a walbro 485 fuel pump and it seems to be too tall for the three clips that keep the fuel pump in place to the canister to clip down. is this normal?
I've just been running it without clipping the three clips back down and it's been fine.
Any recent updates?
i got excited and thought this would fix the chirping issue
I honestly don't think anything will fix the chirping
Berenger Christy I got a fuel pump upgrade from the manufacturer that fixed the chirp. It was also covered by warranty so I didn't pay a thing
bkyang624 how'd you get that upgrade?
Po Russki I got mine off of my warranty as well - there is a slight chirp every once in a blue moon but that goes away in 1-2 secs. Take it in to your dealership to have that taken care of under your warranty.
Run non ethanol gas and they will be gone instantly!
You guys always rock the best fucking wheels, just like rally sport direct does on their car. That’s fuckin dope, I run Advans and volks as well
Fuel filter?
Can I use a cigarette lighter to help light up the work area?
LMAO
I've found using a blowtorch pointed in to the gas tank works best.
😂 made my day
disadvantages of adding this door? why doesn't this come in a car from the factory?
Emmanuel Rovirosa at the very least a voided warranty and the possibility the door sticks shut and does not allow any fuel in. doubt it would happen but went to the store and saw quite a huge price tag on the door. i think i will just stick with the fuel starvation i never noticed before (for now).
you will only feel it on the track in a sweeping highspeed left turn
Jason Cheng, yeah looks like it in the vid too, so even more reason to really consider if this mod is necessary. for a track car i couod easily see it being a yes but as i said before, probably not for me (at least not right now)
Guess that’s why there’s a recall on it now.
Recall on Toyota 86 ?
It just clipped in there perfectly...like the manufacturer designed that flaw on purpose...just so people would buy the clip.
Buy the gk tech flap it's cheaper
what holds the fuel pump in when its pressurised.......
an $80 piece of plastic, obviously worth it but damn...
Lol I'm the 86th like
LOOOOOOL
I find it soo annoying when is says "...your eight six..." not "...your eighty-six..."
Tomato, Tomato. Potato Potato.
It's been a long time since my Japanese classes, but IIRC he's technically correct. In Japanese, the car is referred to as hachi roku, which translates as "eight six." If it were eighty-six, it would have been hachi ju roku. Seems like you're the one saying it wrong, so you should find yourself annoying instead.
Ellison Le you’re the one saying it wrong like most people do, fucking idiot