Hi guys! Here is your timestamp! Time stamp: 00:00 Start > Thank you for 10k Subs 01:58 What to expect in this video and more 02:15 Safety Officer Salary 04:45 Electrical Apprentice Salary 07:45 Earth Moving Equipment technician Salary 09:40 Diesel Mechanic Salary 11:07 The book about the importance of high school vocational education 12:47 Control room operator 15:00 Boilermaker 16:57 Artisan Fitter Please like this video and consider subscribing if you found value! It's absolutely free guys. Thanks for stopping by! ❤
@@liferesetwithboni I did Accounting Sciences (CA Option)...It was difficult for worth nothing in the real world; I should've gone to college and be the Top Student with ease and still slay in the real world cause in Accounting you only make nice money once you're a Chartered Accountant.
I think what's nice about careers in these fields is that they pay you for overtime. In corporate you'll put 100 hours overtime but if your salary is above a certain threshold then forget being paid for those hours. And I agree, people should stop looking down at people who go to colleges, they are so good with things like artisan because in varsity all you learn is theory for 4 years. And not to say that there is something wrong with that, you just get more exposure to certain fields in college than in varsity. And thanks for another great video Boni, the village is indeed happy.😁
I think the next conversation should be how much effort, time and sacrifice so of these careers require for one to actually earn that money. I'm also in the mining industry and wouldn't work those amount of hours, being constantly in that environment and the hard labour some of it requires, not even for that amount of money. The night shifts😢 Kahle kahle I'm lazy😅😅😅😅
Boni let me tell you i used to be a qualified Red Seal Rigger before changing to Software development and if i still had my payslip was going to share with you 😂😂 all i can say is we where chowing it sadly i had to change because of health reasons mind you im female and being a Rigger is physically demanding … i got in with N3 in mechanical engineering then went to do N2 Rigger trade theory
Boni I'm soo disheartened right now. I have N4 Electrical engineering with a distinction, i couldn't study further due to finances so I stayed at home looking for an apprenticeship without any luck. Now I'm doing something else, a learnership that's not related to engineering, and I can't just leave cos I have to work back the years. If only I waited more for an apprenticeship 🤦🏿♀️🤦🏿♀️🤦🏿♀️🤦🏿♀️
Hi Sis Boni i think mineral processing is a short course at CTC Witbank, has nothing to do with control room its for plant operators. Usually control room operators are either someone with blasting certificate, but other mines hire people with just matric if you have been working for the same mine.
Hi sis bony, to answer the question your have about Plant Operators, they do Chemical engineering ikhona e Majuba TVET college and those people are called Plant operators/ mineral processors
what scares me is the lack of provident fund contributions. I really hope these individuals are putting away a good portion of their earnings to a annuity or something and not just buying cars and booze.
@@insanemalik2214 What i mean is that if you Nett 50k a month I hope you are at least putting 10-15k away. If you rely on your company's 3k contribution that would not be enough to sustain you once you retire.
Mining industry has overtimes because we work everyday unlike the one's who work monday to friday, where i work i work 4days and 4days off, that's 2days morning shift and 2days night shift hence the allowances and with overtime if your 4days shifts has weekends on it, its 1.5 overtime for working Saturdays then 2.0 for Sundays and there are also holidays so...
@@MissQJM boilermakers fabricate anything made of steel, im one of them ...lol all e best, its a good trade esp at e mines not so good at production companies
If i was good in maths was definitely gona go back do trade / im keeping my safety,just have to find company to pay more thats all .but anyway we are inspired .
Hello can i ask is there any one who did tool and diemaker with mechanical engineering in college. I just want to know whether they are available jobs for it because i got an apprenticeship about it
BOILERMAKER WILL NEVER EARN THAT SALARY IN SOUTH AFRICA. EVEN IF HE HAS TWENTY YEARS EXPERIENCE. I WAS A TURBINE-FITTER WHICH IS THE HIGHEST PAID TRADE IN THE WORLD AND AFTER DEDUCTIONS I GOT ONLY ABOUT THIRTY THOUSAND OUT
😂😂😂😂 people r earning ur taking chances,turbine fitter at eskom,go to the mine ur wil see,boilermakers at eskom or the once ur working wt dy don't earn much
I was once a Pipe Fitter at Sasol (Secunda) earning 13k every 2 weeks without overtime. I studied the course for 3 months. The reason I wouldn't go back even though the money was good. 1. The grinder is just heavy!!!! 2. It's hard labor, especially if you're a woman. 3. You're lucky if you get like a 5-year contract. It was always 6 month, 1-year, 2 years contracts and can be very frustrating, coz you always go back to the unemployment queue.
@@liferesetwithboni I went back to school. I upgraded my matric, and I'm doing my final year in Clinical Associate (Bachelor of Clinical Medical Practice)
I get that. It’s similar to esl teaching in muslim countries esp. The contracts are mostly 1 year as much as the money is good. It’s not stable enough. We all want stability. Permanent.
I get this all the time on Tik Tok , I'm used to it. Refer to my response on the other comments. Thanks for stopping by and sharing your thoughts with me. 😊
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
Hi guys! Here is your timestamp!
Time stamp:
00:00 Start > Thank you for 10k Subs
01:58 What to expect in this video and more
02:15 Safety Officer Salary
04:45 Electrical Apprentice Salary
07:45 Earth Moving Equipment technician Salary
09:40 Diesel Mechanic Salary
11:07 The book about the importance of high school vocational education
12:47 Control room operator
15:00 Boilermaker
16:57 Artisan Fitter
Please like this video and consider subscribing if you found value! It's absolutely free guys. Thanks for stopping by! ❤
I’ll share mine if you like.
@mzee5533 yes please xaba.bonisile@gmail.com
The Mining industry pays very well. But getting a job is not easy because a lot of people have these skills and it's easy to qualify to study it.
Passing trade test is easy?
Getting an apprenticeship is not child's play.
@@liferesetwithboni From what I hear it's not difficult but getting the apprenticeship for the trade test is extremely difficult.
@@Sicelo_Mhlongo okay
@@djpopx3711 understandably
These payslips makes me heartbroken; because wow! why bother with university when someone with N2 gets so much money?!
😄😄😄what did u do at varsity?
I dropped out mina from doing an BTech in Industrial engineering to go to a college
@@liferesetwithboni I did Accounting Sciences (CA Option)...It was difficult for worth nothing in the real world; I should've gone to college and be the Top Student with ease and still slay in the real world cause in Accounting you only make nice money once you're a Chartered Accountant.
@@lesegonoge you need to go all the way to CA for it to be worth it.
Wow this field is wow, ❤
It depends on a company you work for and the sector .🤗🤗
It seems like we will all be switching careers after this video. 😂 Sign me up! 🙌
Watch out for part two!
Yoh this breaks my heart that I have a National N Diploma in Electrical Engineering but I'm still unemployed 💔 a Qualified Electrician.
Sorry
Go and do N3 to N6 in College and come back to thank me.
@@Itumelengmatlou how is it different?
thats why i went to college. hope to send you my payslip as soon as i get employed
What are you studying?
@@liferesetwithboni i have N1-3 diesel. im currently preparing for n4
@@LeswikasCADQuest awesome stuff! 👌 show your parents this video.
Congratulations Boni on 10k subs😄😄😄😄
Thank you so much ❤️ 💓 💗
I think what's nice about careers in these fields is that they pay you for overtime. In corporate you'll put 100 hours overtime but if your salary is above a certain threshold then forget being paid for those hours.
And I agree, people should stop looking down at people who go to colleges, they are so good with things like artisan because in varsity all you learn is theory for 4 years. And not to say that there is something wrong with that, you just get more exposure to certain fields in college than in varsity.
And thanks for another great video Boni, the village is indeed happy.😁
Ha ! Corporate, taking work work. Working on weekends and evenings but salary is the same.😫😫😫
@@liferesetwithboni And when you don't put overtime, they say you are just doing the bare minimum, hay kurough!😭
I think the next conversation should be how much effort, time and sacrifice so of these careers require for one to actually earn that money.
I'm also in the mining industry and wouldn't work those amount of hours, being constantly in that environment and the hard labour some of it requires, not even for that amount of money.
The night shifts😢
Kahle kahle I'm lazy😅😅😅😅
That conversation is coming soon, hard to film cos it means travel but I'm working on it.
You and me both on laziness 🤣🤣🤣
You making a valid point. Nonetheless these guys are coining it.
@taelimolotsi3671 all careers even in Accounting and Medicine, need hard work and sacrifice.
Boni let me tell you i used to be a qualified Red Seal Rigger before changing to Software development and if i still had my payslip was going to share with you 😂😂 all i can say is we where chowing it sadly i had to change because of health reasons mind you im female and being a Rigger is physically demanding … i got in with N3 in mechanical engineering then went to do N2 Rigger trade theory
Definitely not for a woman 🤭yo the way I'm so weak, ngingafa fi. 😃
Boni I'm soo disheartened right now. I have N4 Electrical engineering with a distinction, i couldn't study further due to finances so I stayed at home looking for an apprenticeship without any luck. Now I'm doing something else, a learnership that's not related to engineering, and I can't just leave cos I have to work back the years. If only I waited more for an apprenticeship 🤦🏿♀️🤦🏿♀️🤦🏿♀️🤦🏿♀️
Ah Mbaleenhle this is heartbreaking 💔! So sorry to hear about this. Make the most of where you are at the moment.
Pray alot ,GOD is the one who opens up doors...
Hope God shines a light on you soon Enhle😊
Hi Sis Boni i think mineral processing is a short course at CTC Witbank, has nothing to do with control room its for plant operators. Usually control room operators are either someone with blasting certificate, but other mines hire people with just matric if you have been working for the same mine.
👌👌👌
Hi sis bony, to answer the question your have about Plant Operators, they do Chemical engineering ikhona e Majuba TVET college and those people are called Plant operators/ mineral processors
Mmm this is nice. I like the basic salary.
@@liferesetwithboni it’s really good🔥👌🏾
Been saying "yoh" throughout the video. Tjeses
🤣🤣🤣
what scares me is the lack of provident fund contributions. I really hope these individuals are putting away a good portion of their earnings to a annuity or something and not just buying cars and booze.
Not sure what u mean whereas companies contribute 50 to 60% to it....
@@insanemalik2214 What i mean is that if you Nett 50k a month I hope you are at least putting 10-15k away. If you rely on your company's 3k contribution that would not be enough to sustain you once you retire.
Mining industry has overtimes because we work everyday unlike the one's who work monday to friday, where i work i work 4days and 4days off, that's 2days morning shift and 2days night shift hence the allowances and with overtime if your 4days shifts has weekends on it, its 1.5 overtime for working Saturdays then 2.0 for Sundays and there are also holidays so...
Good money there
Can you please share the payslip for pilots. Thanks in advance
I've been trying to change my career to boilermaker for a while now. Currently I'm in corporate
What does a boilermaker even do 😄😄😄
@@liferesetwithboni they assemble and repair vessels that contains hot liquids or gases.
@@MissQJM boilermakers fabricate anything made of steel, im one of them ...lol all e best, its a good trade esp at e mines not so good at production companies
@@keithngozo7276whst's the average salary for guys providing services at production companies?
If i was good in maths was definitely gona go back do trade / im keeping my safety,just have to find company to pay more thats all .but anyway we are inspired .
👌👌👌
Ke eng trade?
@@mateyeseratha8785 Trade is technical work ,or subject , like engineering Artisan electrical, milwright boiler etc,
Got my N2 Boiler without Maths
@@bantu6607 how
Overtime means a skills shortage
That's another way of looking at it
An apprentice earning over 40k in SA!!??😳😳 APPRENTICE!!!?? The world is not fair, some people get 2.7k out there
😩😩😩 that's horrible
Not sure if it's in one of your videos but would you please do a Chemical Engineers payslip😊
Hi no chemical Engineering payslips so far.
Afternoon Boni may you please do civil technician
from tvet with an N6 Diploma
Okay I'll look for it
Pls share one on a qualified welder artisan
Hello, will try !
Hi Boni Congratulations. Can you please check how much is Data Entry Clerk Earning In Mzansi
What's the name of the course?
why did I take maths lit nkosi yam...eish😔😔😔
Sorry
It's not too late. Go to college start from N1 you'll be done with your N3 within a year
You can do these courses without maths and physics
To think that I also did samtrac in 2011 at nosa and still unemployed 💔
Sorry
mining industry pays good salary ❤
Yes bhuti it does!
hello please setin for mechanical apprentice n6
Hello can i ask is there any one who did tool and diemaker with mechanical engineering in college.
I just want to know whether they are available jobs for it because i got an apprenticeship about it
how long does it take to complete an N-level at college and how does it general cost ?
Go to your nearest college for this information.
3 months,it’s a trimester for each level
Please share Diesel Mechanic payslip
Was it not there?
Aren't colleges more expensive than university?😢
Tvet? Not at all
I want to be a boiler maker after this video 💭😅
❤️
@@liferesetwithboni thank you for sharing this insightful information 👌💭🤔
@@DC-be9nk I'm so glad you found value!.
😂😂 what are the chances of me getting a job if I go back to school
Angikho happy
😭😭😭what are you doing now?
So how much are the electrical engineers with bsc / beng getting ?
I don't know , don't have it for now.
Do semi skilled artisans get paid good salaries as well..??
What is semi skilled? These ones have passed their trade tests, so they are qualified artisans..
Semi skilled mostly dn,t hv trade test certificate called red seal certificate.mostly HV trade theory are partly HV practical experience
@@alphiusmorifi3426 okay I see.
Do you offer career guidance?
Hi Ntombi, I don't, but soon I'll be bringing you people who can guide you in different career paths. Look out for it this month
norhh man, gabotse whats the use of going to varsity bakwethu, im wasting my time here
University is not a waste of time. It depends on the course. You can't do medicine in college.
@@liferesetwithboni
Fair point, but for BSc coarses in my opinion are a waste of time, I should......I'm currently enroll in a post-grad BSc program 🥲
I work for government under Safety and security etc, and my 12 hour shift night is 67-+ Rand. 😂😂😂😂
Hhay bo 😄😄😄
Yes it's a reality. The only difference I see is my Sunday allowance which is R376. 🤣🤣
@@mathomesamuel801hy please we can I do safety management? Please help 👏
hi boni pleasssssse can we get a civil Eng aprentise salary
I've done it.
Where are my Riggers?😅
Haven't received one yet
Ex female Rigger here🙋🏿♀️ 😄
BOILERMAKER WILL NEVER EARN THAT SALARY IN SOUTH AFRICA. EVEN IF HE HAS TWENTY YEARS EXPERIENCE. I WAS A TURBINE-FITTER WHICH IS THE HIGHEST PAID TRADE IN THE WORLD AND AFTER DEDUCTIONS I GOT ONLY ABOUT THIRTY THOUSAND OUT
Hey, you are not the only one. Over 1 million people viewed this video on Tik tok and left over 1000 comments. vm.tiktok.com/ZM2u4XsU1/
😂😂😂😂 people r earning ur taking chances,turbine fitter at eskom,go to the mine ur wil see,boilermakers at eskom or the once ur working wt dy don't earn much
If I was you I would go abroad.... For better pay....
Anyone here can you please plug me,i have n6 electrical
I was once a Pipe Fitter at Sasol (Secunda) earning 13k every 2 weeks without overtime.
I studied the course for 3 months.
The reason I wouldn't go back even though the money was good.
1. The grinder is just heavy!!!!
2. It's hard labor, especially if you're a woman.
3. You're lucky if you get like a 5-year contract. It was always 6 month, 1-year, 2 years contracts and can be very frustrating, coz you always go back to the unemployment queue.
Wow!.hard labor for sure, what do you do now?
@@liferesetwithboni I went back to school. I upgraded my matric, and I'm doing my final year in Clinical Associate (Bachelor of Clinical Medical Practice)
I get that. It’s similar to esl teaching in muslim countries esp. The contracts are mostly 1 year as much as the money is good. It’s not stable enough. We all want stability. Permanent.
@theblacknyoni I see!.but some of these jobs have good benefits, they look3d like they were permanent.
@pearlmyeni8749 what does clinical medical Practitioner do?
BONI PLEASEGIVE ME YOUR REVERANCES, BECAUSE THEY'RE BLUFFING YOU BADLY
I get this all the time on Tik Tok , I'm used to it. Refer to my response on the other comments. Thanks for stopping by and sharing your thoughts with me. 😊