Just to emphasize - DO NOT TRY THIS, IT IS FATAL. Over 34 people in America alone have died trying this, including 2 electricians. Always read descriptions.
Yes, I actually scrolled through almost all of the fractal wood burning videos and reported them all as harmful/dangerous acts. It took forever but it was worth it. TH-cam has removed 4 of them so far!
@@Prim120 That is FANTASTIC! Most of these people posting these videos are so belligerent I think this is the best way. I have been doing a few videos at a time. I noticed one has disappeared. I think we need to get to the point when any and all videos relating to how to do the process, even safety videos are impossibe to find and in its place there are tons of "DO NOT EVER DO THIS" videos. And those will only work if the video maker is not breaking their own rule.
@@mafurock33 Exactly!! If someone sees someone else doing something, having a warning won't stop them. They'll look up other videos and think they're an expert, and decide they are fine to go ahead and try it because it's only dangerous to "normal" or "other" people. Just don't post the video, that's the only way you can rest assured knowing you didn't have a hand in this kind of danger.
@@Prim120 I think with this channel especially, they are getting a lot of views so they really need to be willing to make the choice to make the safety of human life more important than financial gain. Hopefully youtube steps in and cleans all these videos out soon.
This is absolutely dangerous. I work industrial maintenance where I have to troubleshoot electrical components on a daily basis and I wouldn’t even try this. All it takes is for a novice to loose their footing and bump against that and then ground their self out killing them. Shoot what if something falls on that pice of wood like dust or whatever and without thinking you go to pick it up. A persons natural instinct can kill them with this type of project. There should be a disclaimer on here or something dang. I mean how many times have people dropped knives and without thinking go to grab it before it hits the ground. It’s not that the person is stupid it’s just that we have natural instincts and that natural instinct can kick in before the mind even has time to react or think. If you don’t care about yourself then think about your kids and wife. If they walk out and your being electrocuted their first response would be to run up and grab you to see if your ok and then next thing you know they are being electrocuted. Be safe and think before doing these types of projects.
I'm an electrical engineer who works with high voltage transformers. You should remove this video. The method of wood burning that you show is extremely dangerous. You are holding one probe in your hand while voltage is traveling through it and your safety gloves don't look like they are rated for high voltages. You are spraying water, a conductor, on the wood that has high voltage being applied to it. This could cause an arc in your water spray. You are standing very close to the wood while applying voltage, if you brush up against it, you could be electrocuted. I noticed your safety video was removed, that should give you a hint that this video should be removed as well.
it's like creating artwork out of a blood spatter from a self inflicted gunshot wound to the head. yes, there is a totally one of a kind and unique pattern on the wood but you are also probably dead.
Flag. Report. Dangerous or harmful acts. Do it, folks. You could save a life. Unless this video has a warning and discussion about the dangers of this projects, including the many ways it could and HAS gone wrong, it should be taken down.
This video needs a clear warning in the video! Not just the caption. Watch Ann's video to find out why fractal wood burning is dangerous! th-cam.com/video/GZrynWtBDTE/w-d-xo.html
@Anusha Telugu Ammayi because more than just the person trying the burning can be hurt, if they've reworked a microwave transformer it won't trip breakers and can be a danger to anyone coming to help the initial victim because the current will still be active th-cam.com/video/wzosDKcXQ0I/w-d-xo.html
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
@@Lisa608 shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
People commenting below we know billion of people have died doing this some of just want to enjoy the video to see end result looks like he knows what is doing and made a clear warning not to do it leave the guy alone
I'm sorry, where in the video do you see a "clear warning"? The only warning is a brief warning in the description, but many people do not read the descriptions. A clear warning would be a disclaimer at the beginning of the video at the VERY LEAST. Also, the fact that you know a lot of people have died from trying to follow these videos without knowing the dangers because there is no clear warning and you STILL defend it is insane.
He has posted videos saying that you could make a lot of money selling the burnt pieces. The warning is only there to cover his own butt and his videos actively mislead his viewers to believe it is safer than it actually is.
hello, I have built a burner as shown. the transformer has a turns ratio of 1:10, therefore 240v 10A input and 2400V 1A, out. the unit does burn a bit (1-2 inches) but no way as impressive as yours. additionally I have to continually wet/spray. My questions are. 1. is 2400V 1A sufficient? 2. Does the wood type make a difference, I've used white oak (Oregon)?
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
@@Karen_Marie you’re joking right? You must be a family member of his. This isn’t just dangerous. This is not safe. Period. It is playing a game of Russian roulette and demonstrating that to an audience of very motivated people. You do not understand how watching diy videos subconsciously influences people as well. The more videos you see on a topic, the more confident someone will feel in doing it themselves, even if they have zero experience. This is not a case of people being able to make decisions for themselves. This is a matter of influencing them into doing it themselves. The people who watch these are already motivated DIYers and there is nothing in this video even explaining what not to do and how to stay “safe” (even though there is nothing in the world you can do to lessen the hazard). People simply cannot conceive of the power they would be messing with. Nobody should even know this exists. It’s that bad.
@@neurotika I've never done this activity and wouldn't. But if people wish to do dangerous activities why should anyone stop them, especially if they know its dangerous. Adults have a basic human right to take risks as long as they are only risking themselves and not others.
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
Why do you hold the probe with your hands? the only way to do this somewhat safely is to not come within 10 feet of it while its hot much less spraying water at a 10000 volt probe 6 inches away, why even have the rubber mat if your hand is on the conductor lol
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
Beautiful, but the little kid inside me couldn’t stop thinking, that if it hadn’t become a table, it would have made a fantastic guitar.. keep it going mate.
@@esecretlangel9130 shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
I can say the same thing about cars on the road. How many people died yesterday on the road. Go ahead and post those deaths. Yt es it is dangerous yourself comon since and you will be fine. O I forgot we do not use this right
TH-cam should tally all the money, they and youtubers have ever made spreading this idea and then proactively give it to the survivors of those who have died trying it. A class action lawsuit could easily be made against TH-cam.
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
I've yet to see an end product that is even impressive let alone with risking your life for. Frankly I think this is a waste of a fine piece of beautiful wood.
This is not a safe way to do this! Never hold the probe. Use screws for placement. Never spray the work while the power is live. Always be standing far away on an insulator activating the transformer primary with a momentary switch. Have a power supply Estop pressed in before approaching your work to readjust the electrode locations.
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
I repeat in case you don’t see it. THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
@BruceBurns Woodshop, that’s terrifying. Could you do a video showing it and talking about your method of making it? I would love to see it in some detail.
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
This isnt art although the patterns are interesting in occurrence they aren't controlled to the point of being called creative but are more random therefore creating an environment or event causing these affects on wood cant be called art but merely affect. The fact that it is truly dangerous only cast further disinterest to persue this type of effect. The overall effect isnt worth the risk or trouble.
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
"Daredevils" are people who try potentially dangerous things in a safe way. This craft is extremely fatal and there is NO SAFE WAY to do it. Do not encourage people to try something that has already killed 34 people, including professional electricians.
He's a free adult, and as such, has the freedom to assess risk vs reward as he so chooses. As long as he tells others "this is dangerous, do not try at home" he's not responsible for anyone else making their own risk vs reward assessment. Stop trying to regulate what other people do. It's good for dangers to be made public and known so everyone has all the information and can make an informed decision for themselves. Who are you people to tell others they can't or shouldn't do something because you think it's too dangerous?
WRONG. This video is specifically for the creative D I Yers. It is not like watching a stuntman where the viewer has a relative comprehension of the risk involved. This video is like showing people how yo roll your car at 80mph and live- except the audience is primed to want to try it themselves. This voltage is so fucking high they do not make safety equipment that can compensate for the danger. Experienced electricians are NOPE-ing right out of this. There is zero explanation of how dangerous this is, no understanding how to even work safely around electricity or fundamental explanations on how electricity interacts with the environment. It does not even attempt to explain why this is dangerous, for him or for his loved ones should something happen. That warning is like a small sticker on a rat poison laced lollipop advertised in the kids toy’s aisle. Your comment is so out of touch- would you say that if he was showing how to take how to make your own prescription medication or demonstrating dangerous home improvement projects?
@@neurotika I agree he should be more forthcoming about the very serious risk of electrocution and death. I still think he has a right to enjoy his dangerous hobby and to showcase his projects. But yes, he should add more information about the risks involved.
Greetings, This is Vladimir from NTD Television - ntd com. I wanted to kindly remind you that I sent you a message regarding your content. Please see my previous message. We would be happy to know if there is any special requirement for publishing it that we could fulfill. I am looking forward to hearing from you. Thank you Kind regards, Vladimir
Just to emphasize - DO NOT TRY THIS, IT IS FATAL. Over 34 people in America alone have died trying this, including 2 electricians. Always read descriptions.
One think you can do to help is to report all these has "harmful/dangerous acts" TH-cam is finally starting to take some of these videos down.
Yes, I actually scrolled through almost all of the fractal wood burning videos and reported them all as harmful/dangerous acts. It took forever but it was worth it. TH-cam has removed 4 of them so far!
@@Prim120 That is FANTASTIC! Most of these people posting these videos are so belligerent I think this is the best way. I have been doing a few videos at a time. I noticed one has disappeared. I think we need to get to the point when any and all videos relating to how to do the process, even safety videos are impossibe to find and in its place there are tons of "DO NOT EVER DO THIS" videos. And those will only work if the video maker is not breaking their own rule.
@@mafurock33 Exactly!! If someone sees someone else doing something, having a warning won't stop them. They'll look up other videos and think they're an expert, and decide they are fine to go ahead and try it because it's only dangerous to "normal" or "other" people. Just don't post the video, that's the only way you can rest assured knowing you didn't have a hand in this kind of danger.
@@Prim120 I think with this channel especially, they are getting a lot of views so they really need to be willing to make the choice to make the safety of human life more important than financial gain. Hopefully youtube steps in and cleans all these videos out soon.
This is absolutely dangerous. I work industrial maintenance where I have to troubleshoot electrical components on a daily basis and I wouldn’t even try this. All it takes is for a novice to loose their footing and bump against that and then ground their self out killing them. Shoot what if something falls on that pice of wood like dust or whatever and without thinking you go to pick it up. A persons natural instinct can kill them with this type of project. There should be a disclaimer on here or something dang. I mean how many times have people dropped knives and without thinking go to grab it before it hits the ground. It’s not that the person is stupid it’s just that we have natural instincts and that natural instinct can kick in before the mind even has time to react or think. If you don’t care about yourself then think about your kids and wife. If they walk out and your being electrocuted their first response would be to run up and grab you to see if your ok and then next thing you know they are being electrocuted. Be safe and think before doing these types of projects.
TH-cam is starting to take some of these videos down, you can help by reporting them as "harmful or dangerous acts"
I'm an electrical engineer who works with high voltage transformers. You should remove this video. The method of wood burning that you show is extremely dangerous. You are holding one probe in your hand while voltage is traveling through it and your safety gloves don't look like they are rated for high voltages. You are spraying water, a conductor, on the wood that has high voltage being applied to it. This could cause an arc in your water spray. You are standing very close to the wood while applying voltage, if you brush up against it, you could be electrocuted. I noticed your safety video was removed, that should give you a hint that this video should be removed as well.
it's like creating artwork out of a blood spatter from a self inflicted gunshot wound to the head. yes, there is a totally one of a kind and unique pattern on the wood but you are also probably dead.
Wow. A threat. Wonder who flagged the safety video? 🤔 🤣🤣🤣🤣🤣
I actually love how he's casually spraying water at it.
To any idiot who wants to try this: IN THE NAME OF GOD PLEASE DON’T!!! This project is INSANELY DANGEROUS!! It is absolutely NOT worth trying!!!
Flag. Report. Dangerous or harmful acts.
Do it, folks. You could save a life.
Unless this video has a warning and discussion about the dangers of this projects, including the many ways it could and HAS gone wrong, it should be taken down.
This video needs a clear warning in the video! Not just the caption.
Watch Ann's video to find out why fractal wood burning is dangerous! th-cam.com/video/GZrynWtBDTE/w-d-xo.html
@Anusha Telugu Ammayi because more than just the person trying the burning can be hurt, if they've reworked a microwave transformer it won't trip breakers and can be a danger to anyone coming to help the initial victim because the current will still be active th-cam.com/video/wzosDKcXQ0I/w-d-xo.html
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
@@Lisa608 shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
These videos should be taken down even if they have a warning.
This is one of the dumbest ‘hobbies’ I’ve ever seen.
No one cares what you think.
People commenting below we know billion of people have died doing this some of just want to enjoy the video to see end result looks like he knows what is doing and made a clear warning not to do it leave the guy alone
I'm sorry, where in the video do you see a "clear warning"? The only warning is a brief warning in the description, but many people do not read the descriptions. A clear warning would be a disclaimer at the beginning of the video at the VERY LEAST. Also, the fact that you know a lot of people have died from trying to follow these videos without knowing the dangers because there is no clear warning and you STILL defend it is insane.
He has posted videos saying that you could make a lot of money selling the burnt pieces. The warning is only there to cover his own butt and his videos actively mislead his viewers to believe it is safer than it actually is.
What’s your solution mix? I’m running baking soda and hot water. 3tbsp to 16oz hot water.
3:1 by mass is good.
Great job, looks really amazing!
hello, I have built a burner as shown. the transformer has a turns ratio of 1:10, therefore 240v 10A input and 2400V 1A, out. the unit does burn a bit (1-2 inches) but no way as impressive as yours. additionally I have to continually wet/spray. My questions are. 1. is 2400V 1A sufficient? 2. Does the wood type make a difference, I've used white oak (Oregon)?
Do not do it!!!!!
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
Reporting this for being dangerous
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
Ok Karen
@@Karen_Marie this shit has killed people! It’s incredibly dangerous.
@@Karen_Marie you’re joking right? You must be a family member of his.
This isn’t just dangerous. This is not safe. Period. It is playing a game of Russian roulette and demonstrating that to an audience of very motivated people.
You do not understand how watching diy videos subconsciously influences people as well. The more videos you see on a topic, the more confident someone will feel in doing it themselves, even if they have zero experience. This is not a case of people being able to make decisions for themselves. This is a matter of influencing them into doing it themselves. The people who watch these are already motivated DIYers and there is nothing in this video even explaining what not to do and how to stay “safe” (even though there is nothing in the world you can do to lessen the hazard). People simply cannot conceive of the power they would be messing with. Nobody should even know this exists. It’s that bad.
@@neurotika I've never done this activity and wouldn't. But if people wish to do dangerous activities why should anyone stop them, especially if they know its dangerous. Adults have a basic human right to take risks as long as they are only risking themselves and not others.
How to build this machine
you missed the most important part out THE CLEAN UP AFTER THE BURN ?
I made this video a long time ago and lost that footage 😂 I make sure to include that in my new videos!
"Very dangerous" doesn't describe the level of danger you're in when you do this. Sorry but this video should not be on TH-cam.
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
Report it to the internet police, Karen.
@@spicydiarrhea5662 lol 😂
Why do you hold the probe with your hands? the only way to do this somewhat safely is to not come within 10 feet of it while its hot much less spraying water at a 10000 volt probe 6 inches away, why even have the rubber mat if your hand is on the conductor lol
I love how he casually sprays water at it.
Absolutely Gorgeous!
Thank you!!
@@bruceburnswoodshop1620 Your welcome! Can’t wait to see morel
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
Beautiful, but the little kid inside me couldn’t stop thinking, that if it hadn’t become a table, it would have made a fantastic guitar.. keep it going mate.
Thank you I appreciate that! Maybe some day I’ll get to building guitars I still have a lot to learn!
DO YOU KNOW MANY DIED TRYING TO RECREATE THIS
@@esecretlangel9130 shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
The little kid inside me thought - wow, what a way to potentially die!
@@ckpetleo82 shut up
Please put the warning at the start of the video.
What a foolish dangerous thing to do!
I can say the same thing about cars on the road. How many people died yesterday on the road. Go ahead and post those deaths. Yt es it is dangerous yourself comon since and you will be fine. O I forgot we do not use this right
TH-cam should tally all the money, they and youtubers have ever made spreading this idea and then proactively give it to the survivors of those who have died trying it. A class action lawsuit could easily be made against TH-cam.
With that logic, all videos of any dangerous sports should also be removed, since It may incentivise untrained amateurs to attempt it. Flawed.
Ya, there's no difference between sports and high voltage! XD
good job
That's a beautiful Burn
What kind of transformer are you using
Hey love the burn and the piece. May I ask what solution you used for burn??
Water 3 parts to baking soda 1 part
Dont do this, its extremely dangerous, people die from this
Eatch this yo dee why th-cam.com/video/wzosDKcXQ0I/w-d-xo.html
@@bruceburnswoodshop1620 stop giving people tips on how to do this
Don't try this, its incredibly dangerous. Watch Ann Reardon's video on the dangers of fractal woodburning th-cam.com/video/wzosDKcXQ0I/w-d-xo.html
Report this video for harmful or dangerous acts
shut up lol. people who do this are professionals at it. Just like any dangerous hobby. Examples: Scuba/Sky diving, hunting, driving any many more. It's the peoples fault if they get themselves injured/killed for trying something dangerous without proper research. And no, looking up youtube videos or websites doesn't count as research. Even then, it doesn't take a rocket science to know Wood burning alone is dangerous, especially adding high voltage. Your stupid if you try it randomly.
I've yet to see an end product that is even impressive let alone with risking your life for. Frankly I think this is a waste of a fine piece of beautiful wood.
just makes my skin crawl!
This is not a safe way to do this!
Never hold the probe. Use screws for placement. Never spray the work while the power is live. Always be standing far away on an insulator activating the transformer primary with a momentary switch. Have a power supply Estop pressed in before approaching your work to readjust the electrode locations.
do you guys sell any of these.
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
Nice
That came out beautiful! W
Thank you so much 😊
What kind of transformer did you make your fractal burner from?
It’s from a microwave transformer
@@bruceburnswoodshop1620 how did you get it to burn so nicely on such a long piece ?
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
I repeat in case you don’t see it. THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
May I ask where you bought your burner from ??
I made it from a microwave transformer!
@BruceBurns Woodshop, that’s terrifying. Could you do a video showing it and talking about your method of making it? I would love to see it in some detail.
I will be making a video how I use mine and how it’s made yes!
@@bruceburnswoodshop1620 why? You even said in your description to NOT try this
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
Shame for no warning in the video.
This isnt art although the patterns are interesting in occurrence they aren't controlled to the point of being called creative but are more random therefore creating an environment or event causing these affects on wood cant be called art but merely affect.
The fact that it is truly dangerous only cast further disinterest to persue this type of effect. The overall effect isnt worth the risk or trouble.
Looks great! Would make a great bench seat to a dining set.
Thank you!
Very nice!
Thank you!
THIS IS VERY DANGEROUS. DO NOT TRY THIS!!!!!!! Even if the steps in the video are followed, YOU WILL BE KILLED WITH JUST 1 SLIGHT MISTAKE!!!!!!! IT’S 2000 volts, 20 times electricity needed to kill you in an instant. ONE TOUCH to the surface of the wood/clip/table/equipment WILL KILL YOU. AGAIN, DO NOT DO THIS!!!!!
⚠️☠️TAKE THIS VIDEO DOWN PLEASE!!!! PEOPLE ARE DYING BECAUSE THEY ARE TRYING THIS AT HOME!!!!☠️⚠️
STOP PEOPLE DRIVING VEHICLES PLEASE!!! PEOPLE ARE DYING BECAUSE THEY ARE DRIVING CARS!!
take this down, so irresponsible
Hoptal
Only Daredevills will try this
"Daredevils" are people who try potentially dangerous things in a safe way. This craft is extremely fatal and there is NO SAFE WAY to do it. Do not encourage people to try something that has already killed 34 people, including professional electricians.
Only ppl with a deathwish
I just don't like resin.
Take down this video. At least 34 people have died from trying this craft. It's very dangerous.
Why can’t wee see beautiful art I agree he should put warning on the beginning of the video but why taken down
I understand the risks, but the end result is absolutely amazing!
Right and some of just wanna to see end result
And now you are reported
He's a free adult, and as such, has the freedom to assess risk vs reward as he so chooses. As long as he tells others "this is dangerous, do not try at home" he's not responsible for anyone else making their own risk vs reward assessment.
Stop trying to regulate what other people do. It's good for dangers to be made public and known so everyone has all the information and can make an informed decision for themselves. Who are you people to tell others they can't or shouldn't do something because you think it's too dangerous?
WRONG. This video is specifically for the creative D I Yers. It is not like watching a stuntman where the viewer has a relative comprehension of the risk involved.
This video is like showing people how yo roll your car at 80mph and live- except the audience is primed to want to try it themselves.
This voltage is so fucking high they do not make safety equipment that can compensate for the danger. Experienced electricians are NOPE-ing right out of this.
There is zero explanation of how dangerous this is, no understanding how to even work safely around electricity or fundamental explanations on how electricity interacts with the environment. It does not even attempt to explain why this is dangerous, for him or for his loved ones should something happen.
That warning is like a small sticker on a rat poison laced lollipop advertised in the kids toy’s aisle.
Your comment is so out of touch- would you say that if he was showing how to take how to make your own prescription medication or demonstrating dangerous home improvement projects?
@@neurotika I agree he should be more forthcoming about the very serious risk of electrocution and death. I still think he has a right to enjoy his dangerous hobby and to showcase his projects. But yes, he should add more information about the risks involved.
Greetings,
This is Vladimir from NTD Television - ntd com. I wanted to kindly remind you that I sent you a message regarding your content. Please see my previous message. We would be happy to know if there is any special requirement for publishing it that we could fulfill.
I am looking forward to hearing from you. Thank you
Kind regards, Vladimir