Disco32 DISCUS audio issues
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Disco32 DISCUS audio issues
I worked with Disco32 on these issues a little. They claimed there was nothing wrong, that I should run my radios at full volume to avoid the clipping sound. They also dismissed the bluetooth issues.
I have the amplified Disco 32 PTT with the Kenwood K-1 plug. I'm running it on an Anytone AT-D878UVII. I have attached the FCS brand AMPS to the setup. I get great receive audio, but no audio passes through the boom mic. I know that the FCS mic is cardioid, so I ordered the real Ops Core Amps Dynamic boom mic to see if that fixes it. If not, I need to re-wire the PTT. I sure hope that the boom mic alone fixes it.
Is you headset seated all the way inside the discus? I know you have to firmly push it in until it clicks. It will seat deeper in the fitting and should fix the issue you are having…. Just push it in further
an Armorwerx U-174 NATO/Military to Civilian Wiring Adapter between the discus and headset may solve this. it appears to be a natocivilian wiring adapter and addressed the same type of clicking when using a flight helmet u-174 to 3mm 4-pin nato omtp adapter to connect my peltor tactical pro with peltor mic and wiring to my phone
I keep hearing negative stuff about disco 32. Sucks cause this device is a cool idea. I hope someone makes a better one.
I would like to buy it from you for testing and some other stuff if youre willing to part with it. Im not sure how to message you on here or i would.
Have the same issue with Comtac 6. When the radio engages the audio output it pops pretty bad. Only when the device is on
Capacitor failure?
Where did you get the 2 pin connector for the ID-52??
Did you ever find a fix? I’m having minor popping but the volume is half of what it should be.
No, unfortunately...I think it is going to require a redesign on the internal circuits/electronics.
I got the FDE version and no issues
I just ordered so hope mines ok.
@@coqulation I have ordered one as well.
Would be curious to know if either of you have the same problem.
@@BryanGrigsby so far so good. It's a super tight fit though
@Turd Ferguson mine works just fine with my Android + peltor comtac 3 and my duty Ops Core Amps as well.
I have tried with multiple radios and ptt's set up, and all works flawlessly.
Disco 32 got actually bad rep. His antennas are really bad - for example vest mounted antennas. SNRcomms is way ahead of discos. Now I'm adding that he is refusing you service.
So he makes pricey but low quality products. Plus he used someone elses handle that is in Audio business as a means to advertise himself, without ever telling him.
So lots of cons and very few pros with disco32.