วีดีโอ

The bed is heated to 85c. It's not too exciting. You can only really get an idea that it's getting hotter by looking at the LED on the panel in the lower right hand side, which seems to get dimmer and dimmer. This is because the thermal scope is changing the reference for the hottest thing in the frame.

Disco32 DISCUS audio issues I worked with Disco32 on these issues a little. They claimed there was nothing wrong, that I should run my radios at full volume to avoid the clipping sound. They also dismissed the bluetooth issues.

EASAT-2 & HADES 01.14.22 UTC 17:00

EASAT-2 & HADES 01.14.22 UTC 15:12

Audio removed, sped up 8x. Just a visualization of the passband, defined by some of the noise in the waterfall. A couple times towards the end/middle, I shift the waterfall frequency range to keep up with the doppler effect.

Flying Fortress Landing into Peachtree Dekalb Airport, Atlanta GA

Using the Arduino UNO as an AVR ISP interface for programming other microcontrollers. Also looking at an RS-232 "shifter" circuit to send and receive data between the microcontrollers TTL interface and the PCs serial interface.

Symetric circuit of LEDs, 220ohm resistors, 4.6k ohm resistor, 22 micro farad capacitors 3904 npn bjt transistor and 9vcc.

RTL2382u, E4000 and SDR#

Arduino 4 digit 7 segment 2 shift registers

NPN BJT Transistor, Potentiometer, 12v 7Ah battery. Arduino controls the digital output to the base of the transistor by taking in the analog input of the potentiometer and mapping it to a digital value. When the base of the transistor reaches it's voltage threshold, it completes the circuit between the collector and the emitter, allowing current to flow to the fan.

Diode Tree

Numbers Station 5.855Mhz

5 LEDs with 260 ohm resistors and push button.