The 6030 was made from 1970-1977, and came from Waterloo, Iowa with a 466 cu. in. turbocharged - intercooled engine that was rated at 175.99 PTO HP. Most of them dyno'd a shade over 200. You could turn up the fuel and get about 235 but the engine would overheat if you ran it too hard with that much juice.
old 30 serie is ecual to the new 30 serie !!!! Thunderous Power & Striking Performance !!! John Deere 4 EVER !!!! Verry Nice Movie !!! Well done !! Bill let the beast GO! :D
Bauer Bilt with Kinze parts are manufactured less than 20 miles from here. The Bauers use a 48 row planter for their fields. No marker arms. They spend a bunch of time at the end of each row waiting for the GPS to catch up
No no no. The 638 came with the same turbo as the 619 but the difference being the 638 had a longer bun bolt connected to the guano teds, but the 619 also had the lower shuttle pin from a 664, but the 664 had the longer probe that connected it to the dome, it also used the same plunger as a 554, but the 554 had a bigger wattle probe, also the 638 had a bigger lid as did the 7665, thus summing up means it can pull more furrows! ( I think)
Date to 2020 = Kiwi farmers world record with wheat crop.!!! New Zealand - World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare,= New wheat world record at - [ 258.8 Bu/Ac ] = (6.93t/ac). www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop ..-..2020 HARVEST -th-cam.com/video/VSs_A4Uxab8/w-d-xo.html th-cam.com/video/RyoFfk_Qb74/w-d-xo.html - Canterbury Kiwi-,Volgs - ..th-cam.com/video/vHcg7nTDsxE/w-d-xo.html Thompsons - ://th-cam.com/video/pG85rCuCWsg/w-d-xo.html . Quigleys - ://th-cam.com/video/J40ogFrsxLk/w-d-xo.html . GAVINS - ://th-cam.com/video/FkWUB7t_FKE/w-d-xo.html
ele esta fazendo plantio convencional e plantando sem botinhas e sim com disco de corte, sem duvidas isso ajuda muito para que o trator tenha mais força para arrastar todo o equipamento, se fosse plantado comk botinhas na plantadeira com certeza ele iria ter dificuldades para arrastar a plantadeiras, quem entende sabe oq estou falando, resumindo um trator desse porte se não conseguisse arrastar com facilidade o equipamento podia fechar a john deere
@cormus1 from the factory they say they're 175hp but my dad's old 6030 was put on a dyno sometime in the early 80s. it was a 300hp rated dyno and when they took the tractor up to 1900 rpm it was pulling 280hp and the dyno started making strange noises so they shut it down. he turned it down to 200hp eventually because it would always want to run hot when you weren't in cooler air temps.
Since when was the exhaust manifold on a 5.9L Cummins on the left side of the engine? That's either a 531 (8.7L) or 619CID (10.1L) Deere mill in that tractor. Not only that, but why would anyone want to go from 531 Cubes, down to the 359 of a cummins?
@fattigbonddrang I have a Lexion 470 combine (a CAT rebadged Class) and it is an ok machine, but it ate a $4,000+ circuit board and the shaker pan seals the 3rd season we had it. Both of the rear rims have cracked and been repaired. The radiator screen bearing broke off and it rubbed a hole in the fuel tank. And it snapped off a rear wheel axle this year in the middle of the field during corn harvest. $1700 plus next day air freight from Germany to USA to get it back going. :(
@MrTOPDOG1234 i totally agree with that! "my" deere (bought by my father 32 years ago) has been used for all the work on our farm for it's entire life, now that whe have bought a new one, he gives me the old deere for free:D it's an old 1640 with 80 bhp and the engine is still perfect only it looks kinda old so i'm gonna fix it, old tractors are the best:D
10 ปีที่แล้ว +1
J'adore ce tracteur, trop top! 185CH 6 cylindres turbo je veux le même a la maison pour faire mon jardin:)
i stop on every end because we do not cultivate and i dont want any extra corn out in the endrows. this planter is a finger pickup. they do have a vacume.
já vi plantadeiras e tratores bem mais sofisticados.. área de plantio muito linda, quem não gosta de agricultura eu sempre vou dizer que é a melhor coisa do mundo !!! by: preto
@freddythestandard if you lift while moving on the end the last 5 or 6 seeds in the drop tube land on top of the soil. better to stop and keep them unndergrou nd
@MultiBaldEagle negative...all of them came with a 531. Common misconception would be that some came with a 619 (not a 466), which was not even in the 7520 but instead made its debut in the 86 series 4wd from the 80's.
@brockmenold ....my bad....you're right, I read up on it. I was basing that on what I was told by a neighbor who had a 6030. I think the 466 was introduced in the "50" series in '83. Am I right on that?
Very very nice tractor. How much horsepower is it making? Is it your main planter tractor or was this all for fun? I used to pull a 16 row kinze with a 4630, and the slow hydraulics drove me nuts.
very nice video. If possible please post more videos. Some shots from the driversseat would be nice. As well as soms shots from the 8960 and the other 6030...greetings to Bill
Need a cab tractor, all that breathing in of the dust, dirt, etc... not good on the lungs. I have my open cab tractors too but when plowing and planting where you are throwing up that much in the air it hard on the body, the tractor has air filters, you need something to protect your body too. And for those that think "Oh I am tough, well in a few years when you are coughing and you have health problems will see how tough you are then. I have done it, and took a long time to clear up my health, it is hard on the lungs, eyes, hearing, heart, no sense in doing damage to yourself if you can stop it. But other than the above it is a very nice setup, takes longer to put the seed in than planting.
Must be ideal conditions, plus that sucker is working hard. It’s probably over juiced, overweighted and overworked. I will say that the older non central fill planters don’t pull as hard though.
guess my question is, how are you getting spacing correct with those oversized tires? they look to be to wide and would be driving over where the row unit it gonna be traveling...
@fattigbonddrang I can't speak for Fendt, because I've never owned one, but Case and New Holland (same company... CNH) are junk compared to John Deere. They are a cluster of mix matched parts from various sources that do not work well together and dump oil out of every seal. I am speaking of the newer tractors (MX's TG's etc) as I have no experience with the older New Hollands and Cases. I have a Case MX-285, New Holland TG-285, and a John Deere 8420, all bought within a year of each other.
To nie jest zwykły John Deere 6030 , wystarczy posłuchać silnika na uwrociu, zwrócić uwagę na wlot powietrza i komin. To jest podrasowany jak do rekordów w przeciąganiu ciężarów myślę że ma ponad 300KM
Ponha não existe... Poderia ser usada a palavra coloque. Mas queria ver outro tator 4x2 puxar esse equipamento.....E olha que já trabalhei na JD, MF, Agrale...
the 6030 with duals is a beast. Love seeing that big black smoke.
The 6030 was made from 1970-1977, and came from Waterloo, Iowa with a 466 cu. in. turbocharged - intercooled engine that was rated at 175.99 PTO HP. Most of them dyno'd a shade over 200. You could turn up the fuel and get about 235 but the engine would overheat if you ran it too hard with that much juice.
This video never gets old, not a Deere man but do love that 6030, barks like a real iron horse
Hi, thanks again for all your help with those tires and so...greetings to Bill
2100 RPM...it still has the 531. It's our puller, auger wagon, planter, tillage machine...she's a keeper.
That smile says it all... Love it...
been no cab planting for 19 years i am 29 now i think its the best
those were big tractors in there day. i like the looks too.
SWEET TRACTOR!!!!! She smokes like a champion!! Good ol deere at work. Love the straight pipe. Sounds awesome!!!
old 30 serie is ecual to the new 30 serie !!!! Thunderous Power & Striking Performance !!! John Deere 4 EVER !!!!
Verry Nice Movie !!! Well done !! Bill let the beast GO! :D
Bauer Bilt with Kinze parts are manufactured less than 20 miles from here. The Bauers use a 48 row planter for their fields. No marker arms. They spend a bunch of time at the end of each row waiting for the GPS to catch up
One of my favorite video on youtube!
This tractor is beautiful!
Perfect sound. Thanks for no music.
it sounds so beautiful!
What a brute looks sweet with that big planter
that will bring a tear to your eye.
No no no. The 638 came with the same turbo as the 619 but the difference being the 638 had a longer bun bolt connected to the guano teds, but the 619 also had the lower shuttle pin from a 664, but the 664 had the longer probe that connected it to the dome, it also used the same plunger as a 554, but the 554 had a bigger wattle probe, also the 638 had a bigger lid as did the 7665, thus summing up means it can pull more furrows! ( I think)
Absolutely awsome!
We calledit the dirty thirty. Had a cab. 12 gallon an hour dyno'ed 230hp. Pulled a 32' krause disk 30' 750 notil drill. Good old pony.
Date to 2020 = Kiwi farmers world record with wheat crop.!!!
New Zealand - World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare,= New wheat world record at - [ 258.8 Bu/Ac ] = (6.93t/ac).
www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop ..-..2020 HARVEST
-th-cam.com/video/VSs_A4Uxab8/w-d-xo.html th-cam.com/video/RyoFfk_Qb74/w-d-xo.html -
Canterbury Kiwi-,Volgs - ..th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Thompsons - ://th-cam.com/video/pG85rCuCWsg/w-d-xo.html .
Quigleys - ://th-cam.com/video/J40ogFrsxLk/w-d-xo.html .
GAVINS - ://th-cam.com/video/FkWUB7t_FKE/w-d-xo.html
@@mtl-ss1538 glad to hear it. Should keep as much of it on the island as possible. Gonna get pretty valuable in the days to come.
The 531 and the 619 are the same block family, so yes, a 619 would be a direct replacement for a 531 per se.
LOL
A farmer with one of these is a one-man, diesel-powered planting army!
ele esta fazendo plantio convencional e plantando sem botinhas e sim com disco de corte, sem duvidas isso ajuda muito para que o trator tenha mais força para arrastar todo o equipamento, se fosse plantado comk botinhas na plantadeira com certeza ele iria ter dificuldades para arrastar a plantadeiras, quem entende sabe oq estou falando, resumindo um trator desse porte se não conseguisse arrastar com facilidade o equipamento podia fechar a john deere
that is such a sick tractor. no cab, no problem
Our 4440 with the duals on it would look pretty small compared to that 6030!
@cormus1 from the factory they say they're 175hp but my dad's old 6030 was put on a dyno sometime in the early 80s. it was a 300hp rated dyno and when they took the tractor up to 1900 rpm it was pulling 280hp and the dyno started making strange noises so they shut it down. he turned it down to 200hp eventually because it would always want to run hot when you weren't in cooler air temps.
That thing runs like a BEAR!! Respect
What a nice older tractor you have, and it sounds sweeeet!
Since when was the exhaust manifold on a 5.9L Cummins on the left side of the engine? That's either a 531 (8.7L) or 619CID (10.1L) Deere mill in that tractor. Not only that, but why would anyone want to go from 531 Cubes, down to the 359 of a cummins?
@freddythestandard no its a gravity thing. it takes a little time for thoseeee seeds to drop from the meter to the ground
epic sound!
that beast sounds nice!!!
il est beau ce John Deere 6030 🚜👌
geiler sound!!! John Deere 4ever
@fattigbonddrang I have a Lexion 470 combine (a CAT rebadged Class) and it is an ok machine, but it ate a $4,000+ circuit board and the shaker pan seals the 3rd season we had it. Both of the rear rims have cracked and been repaired. The radiator screen bearing broke off and it rubbed a hole in the fuel tank. And it snapped off a rear wheel axle this year in the middle of the field during corn harvest. $1700 plus next day air freight from Germany to USA to get it back going. :(
chester8420 and that had what ? To do with a 6030 John Deere planting with a kinze planter ? Or did I miss something here ?
the tires are 710-70/R38.
Judging by the state of that exhaust smoke this can't be "Green Farming"
they are the metric 710/70X38.
@MrTOPDOG1234 i totally agree with that!
"my" deere (bought by my father 32 years ago) has been used for all the work on our farm for it's entire life, now that whe have bought a new one, he gives me the old deere for free:D it's an old 1640 with 80 bhp and the engine is still perfect only it looks kinda old so i'm gonna fix it, old tractors are the best:D
J'adore ce tracteur, trop top! 185CH 6 cylindres turbo je veux le même a la maison pour faire mon jardin:)
I like the sound
beautiful sound !
what a beastly tractor!
awesome tractor.
very good billy.. good smoke
Love that black smoke
Thats the beastliest lookin' 6030 I have seen, even at tractor pulls the 6030s dont look that beastly.
I bet that thing is planting right now!
We use to plant with a 4010 with a 8 wide.
i stop on every end because we do not cultivate and i dont want any extra corn out in the endrows. this planter is a finger pickup. they do have a vacume.
já vi plantadeiras e tratores bem mais sofisticados.. área de plantio muito linda, quem não gosta de agricultura eu sempre vou dizer que é a melhor coisa do mundo !!! by: preto
Nice machine! Need more videos.
@freddythestandard if you lift while moving on the end the last 5 or 6 seeds in the drop tube land on top of the soil. better to stop and keep them unndergrou
nd
@MultiBaldEagle negative...all of them came with a 531. Common misconception would be that some came with a 619 (not a 466), which was not even in the 7520 but instead made its debut in the 86 series 4wd from the 80's.
@brockmenold ....my bad....you're right, I read up on it. I was basing that on what I was told by a neighbor who had a 6030. I think the 466 was introduced in the "50" series in '83. Am I right on that?
Thats the way tractors are supposed to be.
Very very nice tractor. How much horsepower is it making? Is it your main planter tractor or was this all for fun? I used to pull a 16 row kinze with a 4630, and the slow hydraulics drove me nuts.
Hello, it is the tractor of my dreams
thanx to all for your nice comments! we are glad you enjoy the video.
Awesome
@nacomamila that old 6030 is just playing with that planter,,,they are rated somewhere over 200hp
thats one mean sounding deere right there
we replaced a 466 in a 1976 8430 with the 8.1 out of a 8400
thats sweet as hell
i farm and i dont understand why he is stopping completely on both ends? maybe his hydraulics can't lift and lower fast enough idk?
how many hectars you have to use that sort of equipment ?
i would say its the 619, correct me if im wrong but isn't the 619 a replacement for the 8.7?
i have cultimulched with a 6030 before the 6030 had a cab good tractors i like the 5010 better the 10 20 and 30 series are the best
very nice video. If possible please post more videos. Some shots from the driversseat would be nice. As well as soms shots from the 8960 and the other 6030...greetings to Bill
Do you have to stop when you turn around because you are running out of hydraulic power? Also does Kinze still use fingers to place their seed?
Big tractor.What tires are the rear?
That Rocks Mates but see John Deere in Poland
Need a cab tractor, all that breathing in of the dust, dirt, etc... not good on the lungs. I have my open cab tractors too but when plowing and planting where you are throwing up that much in the air it hard on the body, the tractor has air filters, you need something to protect your body too. And for those that think "Oh I am tough, well in a few years when you are coughing and you have health problems will see how tough you are then. I have done it, and took a long time to clear up my health, it is hard on the lungs, eyes, hearing, heart, no sense in doing damage to yourself if you can stop it.
But other than the above it is a very nice setup, takes longer to put the seed in than planting.
Saw a few photos in a build log where a guy installed a SoundGuard onto a 6030. Just... wow.
My dad has a 6030 with a cab. Good old power house, but beat you up running it. It’s been restored
and retired. Looks showroom new.
Nice Tractor with beautiful sound out of the custom pipe ;)
Greetz from holland
Gotta love the diesel. Ever wanna sell it🤔
a 6030 can pull a 24 row? i thought you would need like a 8r tractor
Must be ideal conditions, plus that sucker is working hard. It’s probably over juiced, overweighted and overworked. I will say that the older non central fill planters don’t pull as hard though.
gotta love diesel smoke
this .. this i call a real engine !! JD power !!
Those are huge rear tires.What size are they?
that is so lagit ha......awesome
Thanx to all for your comments! Glad you enjoy.
this is great, very nice video, thanks for sharing! greez danoo
Thats more than a tractor..seems good for mud bogging :)
by the way is the muffler and air filter customized? It looks so nice
John Deere is the best
I'd be done in less than an hour with that setup
guess my question is, how are you getting spacing correct with those oversized tires? they look to be to wide and would be driving over where the row unit it gonna be traveling...
Not enough ground pressure to matter.
The soil compaction is minor
That is a sweet tractor what dose it have for hp
All i can say is BEAST!!!! lol
That tractor is not running right. Why did motor surge at one point? Nothing about the load changed.
THATS ONE SWWET OLD DEERE! Let me guess, 619 repower?? Whats she pushin' about 280 to 325 horse??
open air is for the birds, a cab is the only way to go.
kveile open cab is the way to go been planting like that for 5 generations
@fattigbonddrang I can't speak for Fendt, because I've never owned one, but Case and New Holland (same company... CNH) are junk compared to John Deere. They are a cluster of mix matched parts from various sources that do not work well together and dump oil out of every seal. I am speaking of the newer tractors (MX's TG's etc) as I have no experience with the older New Hollands and Cases. I have a Case MX-285, New Holland TG-285, and a John Deere 8420, all bought within a year of each other.
I'd say around 2100-2200.
To nie jest zwykły John Deere 6030 , wystarczy posłuchać silnika na uwrociu, zwrócić uwagę na wlot powietrza i komin. To jest podrasowany jak do rekordów w przeciąganiu ciężarów myślę że ma ponad 300KM
nevermind it is a inline 6
is this a pulling tractor "tractor pull"
quantos CV, HP tem?
that is a good lookin tractor. what year is it?
Ponha não existe... Poderia ser usada a palavra coloque. Mas queria ver outro tator 4x2 puxar esse equipamento.....E olha que já trabalhei na JD, MF, Agrale...
Good...