G’day Tolly, You’ve done this bike justice, very subtle at first until you go back over the bike & spot more upgrades. This Bayliss has been done with restrained class. Troy would probably applaud your efforts Tolly. Cheers Steve
Would you mind sharing where you got those red spacers to eliminate the stupid reflectors it comes with? Also any insight into what throttle spacer you used? Just took delivery of mine today. Love your upgrades. Flawless bike sir.
Can I please have the torque specs for both side of the bar end for the brake lever guard and the torque spec for the reflector delete? Thank you for your help. Beautiful looking Bayliss you got!
Hi. I have same bike with a lot of the same mods! I am stuck though on Full Akra, or slip on. Do you think the slip ons make a significant difference to the sounds pls?
What's slowing you down from upgrading? Haha. She is absolutely beautiful. I have a 2021 V4 and when I saw the V2 in person, I wanted to buy it immediately. Yours just came out so clean. Congratulations!!!!!!!!
Thank you mate👍, the V4 is a brilliant bike but I think it’s just to much of a beast for me tbh🤣, the V2 just suits me to the ground…but you never know maybe one day🤔😂. Cheers 👍
Hi there, would you be prepared to share where and what the after nods are on a list. My bayliss was due for collection today but damn reg plate hasn’t arrived so can’t collect. Gutted.
What a beauty, I would be extremely stressed riding one of these being afraid not to drop it even with all the protection installed. The only thing to make me ride it with confidence would be a full insurance.
Thanks Randy, sounds like you have a pretty good setup as well👍. I nearly went for the full system but found a real good deal on the slip-ons so went for them. Do you know what hp and torque gains you get with your full system? Cheers 😁
@@tolly55 I had found some gain numbers for the full system at one point. However, i can't find them rt now. I'm sure a non factory tune could pull some more out. If I find the info, I'll share it.
Hi Mark, yeah a little….Max power (hp) +2.5%, power at medium rpm (hp) +2%, Max torque (Nm) +2%, torque at medium rpm (Nm) +9% according to the Ducati website parts specs. I hope to cove this in my next video 👍 Cheers.
Hi very nice and cool mods you have done! I have the same bike. Can you tell me how did you putt off the oem bar end weight please?? I ve tried to use M14 tip but i cant putt it off 😢
Hi, Thank you, I used a TX 60 torx bit and a long handle ratchet to remove the oem bar ends😁 they are pretty tight though😫. Congrats on the bike, how are you getting on with it?😁
Cheers Tolly, I absolutly love the sound of your exhaust. Did I hear you correctly when you said, they are slip on's and NOT the FULL SYSTEM ??? I am now subscribed and ready for more Bayliss V2 content !
😂😂Thank you for subscribing, i will try and get some more content out soon👍. Yes just the Akra slip-ons, the full system looks amazing but I couldn't justify the extra cost and fitting a full system is a big deal! I just wanted to get the cat off the thing and the slip-ons are dead easy to fit and sound fantastic. Thanks again👍
Thanks, I’m trying to get the boot guard R&G but I can’t find it. They directed me to a generic one that I need to cut. But I love yours better. The link to the product or name of it will be greatly appreciated
Hi, I used a heat resistant enamel calliper paint, I had some to paint my car callipers with so I used that😁. Just wipe over the area with Surgical spirit/alcohol and apply the paint, use a fine brush and apply on the letter and work out so you don’t have paint running down the side of the letters👍 let me know how you got on😁Cheers.
@@tolly55 thank you for the help! I’ll give it a go. It’s a shame they don’t come painted as standard! I ordered my Bayliss when they first announced it but it still hasn’t arrived. Due within two weeks though. I’ve got so many aftermarket parts here waiting to fit to it haha!
@@russssh No problem, yeah most Brembo's have the red text so im not sure why this model doesn't. wow, thats a long wait....but not long now!! think I got lucky with mine then, keep me posted im interested to see what extras you fit. Cheers.
@@tolly55 yes will do! I received a bunch of Rizoma and Ducati Performance parts in the mail today. I didn’t realise the Bayliss had self cleaning master cylinders (the base V2 doesn’t), so I’m hoping the Ducati Rizoma reservoirs still work ok. Have you had any issues with yours?
Hi Tommy, I got the carbon exhaust cover from Addiction Motorsport Ltd., but I have to say im very disappointed in the finish and quality of the guard, they claim its the same weave and finish as the Ducati Performance Carbon parts but it's not, i also had to drill two holes out bigger and tap a new thread in the top mounting point because it was full of glue and the hole in the side was rough so I used a Dremel to round it off! so I wouldn't recommend it at all.
Hi NM, that’s a good point……I did think about it but I just don’t like how they look👎, the R&G sliders have a metal brace that are fitted as well and don’t look very nice! I know they could save me a lot of money one day but for the time being I’m not going to bother but I might change my mind later on👍😁. Cheers.
@@tolly55 i would suggest please go for it, for my cbr as well i was having same opinion but a reckless dude just pulled out of nowhere, in front of my bike and frame sliders took all hit!
I have also recently bought the V2 BAYLISS. Great to see how the mods look on the bike. Good reference for purchasing or not. . Now it's time to invest on riding skills to get rid of those chicken strips on your bike. That's where the most beautiful mod can be done and it won't cost a penny.
Where did you buy the black steering damper and how much does it cost to do the ceramic coating? The coating thing is a good idea, i havent thought about it yet. Finish the bike with bts rapid tek 5 wheels.
Hi, the black steering damper comes standard with the Bayliss👍 The ceramic coating I used is around £40-£50 a small bottle and do it yourself, Or a dealership/detailer will charge £200-£300 for doing it😮.
this is a sweet bike, i have a krt kawasaki 2020 and i am contemplating purchasing this bike just because it looks so beautiful and with the upgrades even more beautiful. after some more research i will make a decision, if this bike cant perform like my machine, there is no reason to make the purchase. in my opinion of course, still the bike is beautiful, well done!
Hi, If your going to get a Ducati Dealership to fit it for you then the warranty will be valid👍, if your going to fit it yourself then it depends on the dealership, some dealerships are strict and some are easy going….my dealership was fine with me fitting it and I still have the full warranty😁 Cheers.
Hi, Thank you👍, what a nice bike to upgrade from, you can't go wrong with either and i did look at the F3 before buying the V2 and its a gorgeous bike, but after owning a 959 for a while i just fell in love with the twin engine😍Its a personal choice really so let me know what you went for👍 Cheers.
I bought mind as a dedicated track day bike. She will never see the street. I take delivery next week. So excited! I traded in my V4S for it. This is the Goldilocks bike! BTW, do yourself a favor and remove the throttle spacers. Trust me on this. The "slop" is there for a reason, especially on a race track where you need that slop in corners..... All the master Ducati mechanics I have spoken to have also told me that over time the ECU gets "confused" and starter issues occur. It can also impact the ride by wide over time....
Hi, congrats on the new bike👌, wow that’s some track toy👍 I’m sure you will have lots fun on it, unfortunately I’m to scared to take mine on a track so I will stick to the roads🤣. Funny you say that because I have started to hear a couple of things about the throttle spaces, most recently my Ducati Dealer told me I should remove them or one of them anyway! So I removed one spacer which gives a little play and it feels good, I might take out the other one soon, thanks for the tip👍😁 Cheers.
@@tolly55 good call. Trust me! As for track. I understand your hesitation. But honestly the track is way safer than the street. I rode for 30 years on the street before i gave it up to focus on track. These bikes are made for the track. A great, safe way to be introduced to track is thru the California Suoerbike School. They really hold your hand thru it. Highly recommend. It will really improve your street riding too
@@KiwiMoto72 Hi, Your right....the bike does belong on the track and i might be brave enough one day to do a track day with it, so lets see. I have heard of C.S.S. so i might check them out, I know i would learn so much even in one day.😁Cheers.
@@tolly55 i promise you. If you approach track learning with a low ego and an open mind you wl be addicted quickly. I love riding in the canyons but HATE getting there. The traffic. The drivers on their phones doing facebook… and the heat. The dedicated track environment makes you smile. The Cali school is expensive but nothing comes close. Where are you?
@@KiwiMoto72 You've talked me into it😂, We have a Cali superbike School here in the UK at a couple of really good tracks, it is expensive but i must do one👍 Cheers
Beautiful bike, could you please include links to the sites were you bought all the mods? Also, I got a little bit confused. You said that the V2 didn’t need the Akro? I thought they V2 and Bayliss where the same besides the fairings. Did you install the Akro or had Ducati do it for you? About how much was it? Did you have to flash the ECU? Congratulations on this beauty!
Hi, for a sports bike its pretty good, after long rides I can feel it in my wrists a bit but I've had no issues with my back yet. get one.....you won't regret it.
Hi, Do you have the full system? I know they come with a gloss exhaust guard which is a lot slimmer and sleeker then the stock guard. I would like one of those for my V2👍 Cheers
Hi E Z, I'm not sure about that!, if your in California and its legal then it should be legal if you put it on your V2🤔, I guess it all depends on where you are, different countries, states etc.. will have different laws. The Akra exhaust is technically illegal here in the UK because it has 'Not for road use' stamped on it.....but we use them anyway and i've had no issues. Cheers and ride safe👍
Hi, unfortunately I don’t…. but I will try and find out👍, I have no intention on taking the bike to a track so it’s not something I thought about really😁. Cheers.
Damn bro…you did a good job on this V2 👌🏻
G’day Tolly, You’ve done this bike justice, very subtle at first until you go back over the bike & spot more upgrades. This Bayliss has been done with restrained class. Troy would probably applaud your efforts Tolly. Cheers Steve
Hey mate great vid, good honest rider's approach
Great work there, very inspired, I collect mine next week.
Absolutely lovely bike, great job as always. Enjoy the bike in every sunny day, it realy is a beauty 😍
Thank you Constantin👍 I will enjoy every minute🤣
Cheers😁
Sharp looking bike. Love the clear clutch cover.
Thanks very much 👍, yes those clear clutch covers are a thing of beauty 👍😂. Cheers.
Beautiful bike. Loving all the modifications you’ve done. Makes a great bike in to a awesome bit of kit. Congratulations.
Thanks Steve👍 I’m really pleased with it…..it always puts a smile on my face.
Cheers.
Hello! I love your V2! I am curious does the titanium exhaust help with the seat feeling too hot?
Would you mind sharing where you got those red spacers to eliminate the stupid reflectors it comes with? Also any insight into what throttle spacer you used? Just took delivery of mine today. Love your upgrades. Flawless bike sir.
lovely bike
What a beauty!
Many thanks DavidDay👍👍Cheers.
gorgeous.. I can look at that beauty all day!
Thank you👍, and I do spend a lot of time just looking at it🤣🤣.
pure music!!!!!
Luca - it sure is😃Cheers
Fooooookin beautiful
Thank you Michael👍 Cheers.
Can I please have the torque specs for both side of the bar end for the brake lever guard and the torque spec for the reflector delete? Thank you for your help. Beautiful looking Bayliss you got!
Got a Bayliss V2 also and in the market for the Akra. Any tips on where to get a deal on some
Hi. I have same bike with a lot of the same mods! I am stuck though on Full Akra, or slip on. Do you think the slip ons make a significant difference to the sounds pls?
😍😍😍😍 wow she is beautiful
Thank you👍 I’m a little biased but I think she’s a 10 🤣
Awesome machine 👍👌 i would like to have the front mud guard painted red with gold wheels to just make it stand out a bit more.
Hi, thank you👍, yes gold wheels would look striking for sure😮, the gun metal finish on the Bayliss wheels is pretty nice as well😁, Cheers.
Can u list where to get all those carbon fiber parts around the bike please??
What's slowing you down from upgrading? Haha. She is absolutely beautiful. I have a 2021 V4 and when I saw the V2 in person, I wanted to buy it immediately. Yours just came out so clean. Congratulations!!!!!!!!
Thank you mate👍, the V4 is a brilliant bike but I think it’s just to much of a beast for me tbh🤣, the V2 just suits me to the ground…but you never know maybe one day🤔😂. Cheers 👍
Hi there, would you be prepared to share where and what the after nods are on a list. My bayliss was due for collection today but damn reg plate hasn’t arrived so can’t collect. Gutted.
Qué preciosidad de moto. Y finita
👍👍Cheers
What a beauty, I would be extremely stressed riding one of these being afraid not to drop it even with all the protection installed. The only thing to make me ride it with confidence would be a full insurance.
hi can you tell me what can i do to have a clean collector shining like yours? tnx
Awesome setup mate. I've got a 2020 w/ full Akrapovic Ti. Missing the bits Öhlins tho :(
Enjoy 👍
Thanks Randy, sounds like you have a pretty good setup as well👍.
I nearly went for the full system but found a real good deal on the slip-ons so went for them.
Do you know what hp and torque gains you get with your full system?
Cheers 😁
@@tolly55 I had found some gain numbers for the full system at one point. However, i can't find them rt now. I'm sure a non factory tune could pull some more out. If I find the info, I'll share it.
Beautiful choices!
I would prefer an exhaust that doesn’t make me use earplugs 😂
Hi, 😂😂 so would i, but i think i would go deaf after 10mins🤣
Nice mods, do you know if there are any performance gains by adding the Akropovic exhaust and upmap?
Hi Mark, yeah a little….Max power (hp) +2.5%, power at medium rpm (hp) +2%, Max torque (Nm) +2%, torque at medium rpm (Nm) +9% according to the Ducati website parts specs.
I hope to cove this in my next video 👍 Cheers.
@@tolly55 wicked, thanks for the reply and looking forward to your next video. 👍
Looking to purchase one , if you had your time again would you buy it again
Hi very nice and cool mods you have done! I have the same bike.
Can you tell me how did you putt off the oem bar end weight please??
I ve tried to use M14 tip but i cant putt it off 😢
Hi, Thank you, I used a TX 60 torx bit and a long handle ratchet to remove the oem bar ends😁 they are pretty tight though😫.
Congrats on the bike, how are you getting on with it?😁
Cheers Tolly, I absolutly love the sound of your exhaust. Did I hear you correctly when you said, they are slip on's and NOT the FULL SYSTEM ??? I am now subscribed and ready for more Bayliss V2 content !
😂😂Thank you for subscribing, i will try and get some more content out soon👍.
Yes just the Akra slip-ons, the full system looks amazing but I couldn't justify the extra cost and fitting a full system is a big deal! I just wanted to get the cat off the thing and the slip-ons are dead easy to fit and sound fantastic. Thanks again👍
Beautiful bike. Please include links to all the mods you installed. Thanks and congratulations
Hi Fearless,
I will get on to it....😬. Cheers
Thanks, I’m trying to get the boot guard R&G but I can’t find it. They directed me to a generic one that I need to cut. But I love yours better. The link to the product or name of it will be greatly appreciated
Great mods mate! Looks sharp! How did you paint the Brembo text and what prep and product did you use?
Hi, I used a heat resistant enamel calliper paint, I had some to paint my car callipers with so I used that😁. Just wipe over the area with Surgical spirit/alcohol and apply the paint, use a fine brush and apply on the letter and work out so you don’t have paint running down the side of the letters👍 let me know how you got on😁Cheers.
@@tolly55 thank you for the help! I’ll give it a go. It’s a shame they don’t come painted as standard! I ordered my Bayliss when they first announced it but it still hasn’t arrived. Due within two weeks though. I’ve got so many aftermarket parts here waiting to fit to it haha!
@@russssh No problem, yeah most Brembo's have the red text so im not sure why this model doesn't.
wow, thats a long wait....but not long now!! think I got lucky with mine then, keep me posted im interested to see what extras you fit.
Cheers.
@@tolly55 yes will do! I received a bunch of Rizoma and Ducati Performance parts in the mail today. I didn’t realise the Bayliss had self cleaning master cylinders (the base V2 doesn’t), so I’m hoping the Ducati Rizoma reservoirs still work ok. Have you had any issues with yours?
@@russssh Hi, I’ve had no issues at all with my master cylinders….all good👍
Cheers
Hi, where did you get the carbon exhaust cover? The one under the seat. Thanks
Hi Tommy, I got the carbon exhaust cover from Addiction Motorsport Ltd., but I have to say im very disappointed in the finish and quality of the guard, they claim its the same weave and finish as the Ducati Performance Carbon parts but it's not, i also had to drill two holes out bigger and tap a new thread in the top mounting point because it was full of glue and the hole in the side was rough so I used a Dremel to round it off!
so I wouldn't recommend it at all.
Nice video mate, why didn't you get frame sliders?
Hi NM, that’s a good point……I did think about it but I just don’t like how they look👎, the R&G sliders have a metal brace that are fitted as well and don’t look very nice! I know they could save me a lot of money one day but for the time being I’m not going to bother but I might change my mind later on👍😁. Cheers.
@@tolly55 i would suggest please go for it, for my cbr as well i was having same opinion but a reckless dude just pulled out of nowhere, in front of my bike and frame sliders took all hit!
@@NM-tk4kc Hi, your completely right I should have them on my bike……I will look at getting some soon👍.
Cheers.😁
I have also recently bought the V2 BAYLISS. Great to see how the mods look on the bike. Good reference for purchasing or not. . Now it's time to invest on riding skills to get rid of those chicken strips on your bike. That's where the most beautiful mod can be done and it won't cost a penny.
Hi, Congrats on your new Bayliss👍, and like you i just need the riding skills now😂 have fun with it, Cheers.
Where did you buy the black steering damper and how much does it cost to do the ceramic coating? The coating thing is a good idea, i havent thought about it yet. Finish the bike with bts rapid tek 5 wheels.
Hi, the black steering damper comes standard with the Bayliss👍
The ceramic coating I used is around £40-£50 a small bottle and do it yourself, Or a dealership/detailer will charge £200-£300 for doing it😮.
What kind of red paint did you use to paint the brembo caliper
Hi Zerox, the paint is a heat resistant enamel paint and it’s Ferrari red.
Cheers 👍
this is a sweet bike, i have a krt kawasaki 2020 and i am contemplating purchasing this bike just because it looks so beautiful and with the upgrades even more beautiful. after some more research i will make a decision, if this bike cant perform like my machine, there is no reason to make the purchase. in my opinion of course, still the bike is beautiful, well done!
Hi, and thank you very much. yes performance wise your krt would have my Bayliss for Breakfast😂, both stunning machines though👍Cheers.
hi by changing the clear clutch cover will it void the warranty?
Hi, If your going to get a Ducati Dealership to fit it for you then the warranty will be valid👍, if your going to fit it yourself then it depends on the dealership, some dealerships are strict and some are easy going….my dealership was fine with me fitting it and I still have the full warranty😁
Cheers.
Awesome. No words. I have an Aprilia Rs 660 but I want an upgrade. I don’t know if buy Panigale V2 or Agusta F3. Any advices?
Hi, Thank you👍, what a nice bike to upgrade from, you can't go wrong with either and i did look at the F3 before buying the V2 and its a gorgeous bike, but after owning a 959 for a while i just fell in love with the twin engine😍Its a personal choice really so let me know what you went for👍
Cheers.
@@tolly55 I am waiting for Agusta F3 2023. When it comes out I go to the dealer and let you know! Enjoy your V2.
@@AyumazHD good choice, keep me posted👍 Cheers.
What do u use to clean you exhaust, I got some rain spots on mine and scared to touch it… cheers…
Hi, I just use bike polish and a soft cloth which works fine, might not be the proper way but its not doing any damage. 👍Cheers
Can the type up the all the mods and parts / suppliers in the details?
Hi, Yes I will try and do that at some point soon, I have a lot of parts so it could take a while 🤣.
Cheers
I bought mind as a dedicated track day bike. She will never see the street. I take delivery next week. So excited! I traded in my V4S for it. This is the Goldilocks bike! BTW, do yourself a favor and remove the throttle spacers. Trust me on this. The "slop" is there for a reason, especially on a race track where you need that slop in corners..... All the master Ducati mechanics I have spoken to have also told me that over time the ECU gets "confused" and starter issues occur. It can also impact the ride by wide over time....
Hi, congrats on the new bike👌, wow that’s some track toy👍 I’m sure you will have lots fun on it, unfortunately I’m to scared to take mine on a track so I will stick to the roads🤣.
Funny you say that because I have started to hear a couple of things about the throttle spaces, most recently my Ducati Dealer told me I should remove them or one of them anyway! So I removed one spacer which gives a little play and it feels good, I might take out the other one soon, thanks for the tip👍😁 Cheers.
@@tolly55 good call. Trust me! As for track. I understand your hesitation. But honestly the track is way safer than the street. I rode for 30 years on the street before i gave it up to focus on track. These bikes are made for the track. A great, safe way to be introduced to track is thru the California Suoerbike School. They really hold your hand thru it. Highly recommend. It will really improve your street riding too
@@KiwiMoto72 Hi, Your right....the bike does belong on the track and i might be brave enough one day to do a track day with it, so lets see.
I have heard of C.S.S. so i might check them out, I know i would learn so much even in one day.😁Cheers.
@@tolly55 i promise you. If you approach track learning with a low ego and an open mind you wl be addicted quickly. I love riding in the canyons but HATE getting there. The traffic. The drivers on their phones doing facebook… and the heat. The dedicated track environment makes you smile. The Cali school is expensive but nothing comes close. Where are you?
@@KiwiMoto72 You've talked me into it😂, We have a Cali superbike School here in the UK at a couple of really good tracks, it is expensive but i must do one👍 Cheers
Where did you get the black nuts for the windshield? I have the Bayliss and I would like to do the same. Thanks Mate
Hi Daniel, the black screen bolt kit is from ProBolt.com👍.
Cheers
@@tolly55 Did you order the one for the Panigale V4S? In USA it doesn't show a Panigale V2
@@Lola6654 Hi Daniel, yes the V4S kit will be the same and fit fine👍 cheers
Beautiful bike, could you please include links to the sites were you bought all the mods?
Also, I got a little bit confused. You said that the V2 didn’t need the Akro? I thought they V2 and Bayliss where the same besides the fairings.
Did you install the Akro or had Ducati do it for you? About how much was it? Did you have to flash the ECU?
Congratulations on this beauty!
Am considering to get this. But was wondering on the seating position. Is it back breaker ?
Hi, for a sports bike its pretty good, after long rides I can feel it in my wrists a bit but I've had no issues with my back yet.
get one.....you won't regret it.
@@tolly55 get throttle spacers. Makes a big difference on longer rides. Really easy install too.
@@travelon2androamingtherock301 thanks for that…I got my spaces the other day, easy install and gives a better feel👍
Cheers.
@@travelon2androamingtherock301 What do the spacers really do? How does it benefit the ride?
@@tolly55 Got one, and loving the ride already. But yeah, my right wrists pains a lot. Maybe I gotta get used to it.
My carbon exhaust cover is very different and has acrapovich on it
Hi, Do you have the full system? I know they come with a gloss exhaust guard which is a lot slimmer and sleeker then the stock guard.
I would like one of those for my V2👍 Cheers
So how come this is legal in California but if I put the same slip on exhaust on my v2 then it's illegal?
Hi E Z, I'm not sure about that!, if your in California and its legal then it should be legal if you put it on your V2🤔, I guess it all depends on where you are, different countries, states etc.. will have different laws.
The Akra exhaust is technically illegal here in the UK because it has 'Not for road use' stamped on it.....but we use them anyway and i've had no issues. Cheers and ride safe👍
Hello Tolly
Do you know the decibels with and with out baffles?
Hi, unfortunately I don’t…. but I will try and find out👍, I have no intention on taking the bike to a track so it’s not something I thought about really😁.
Cheers.
Just ordered mine today. 7 month wait though. : (
Hi Rocky, don’t worry those seven months will go quickly and it will be worth the wait👍 ride safe. Cheers.
6:39
Up the AUDIO mate, and then people will want to stick around to hear the rest. Bye!