Take a look at the m12 tools. The rachets and right angle die grinder are great, I use them daily in my fabrication work. They compliment my 20v tools quite well.
I definitely will. I’ve been contemplating pulling the trigger on either the Milwaukee long reach or the snapon long 14.4. I know there’s pros and cons with each, I just haven’t been able to convince myself which one to try out first yet. Thank you for watching
@richardsgarage6697 the only snap on power tool we still use is the drills. Not that they're anything special, but we may aswell keep them if they work. The others, 3 impacts a ratchet, an angle grinder and countless flashlights all sit on the shelf gathering dust, total junk. Personally I don't like the mileaukee ratchets or their beast impact as the handles are small bit they do have 3 year warranty, so we like that
For the longest time I wrote off the Craftsman Gunmetal as a gimmick. I finally held one the other day and was pleasantly surprised at how well it felt in my hand. Quickest non truck tool purchase I ever made. Only complaint is that it doesn't come in a locking flex head like my SnapOn 1/4"
Great review. I appreciate you have a mix of tools including, Snap On to HF. I enjoyed how you commented on specifics and how they have worked out for you. So many people bash certain brands just because of the name. If the tool works and holds up that is what really counts.
Thank you for watching! I 100% agree with you. There are some really great tools out there that some people will never try just because of a negative connotation from the brand. I really appreciate your nice comment
The way you feel about the craftsman 1/2dr ratchet is how I feel about the ICON ratchets. I've got 5 of them 1/4dr roto, flex and fixed head comfort grip. A regular 3/8dr and a regular 1/2dr. I highly recommend them.
I do not have one but I understand what you are saying. I definitely have thought about trying one out but just haven’t yet, I probably will try the Icon 1/4 soon. Thank you for watching!
Thanks for the tour! Craftsman actually sent me that 120 tooth ratchet after I warrantied my old US made ratchet, and its good to hear that it works well. I was a little bummed after I saw it was sealed and you couldn't repair or even lube the ratchet. Appreciate the review.
Man I’ve got the same cart and had the same issue with the drawers. If you grab the front of them and slowly pull out hard, the slides will come out like they’re supposed to and work right from then on. The drawers actually come out to where the back is flush with the front of the cart
Why have tools you never use in your cart? Btw, since the 1960's, a rolling wedge has been called a "lady slipper" because it's hard and doesn't flex, not like a foot.
I do use most of them, my cart acts as my main storage at the moment, I don’t have another box to store stuff I don’t use on a daily basis so I leave most everything in there for a rainy day.
Depending on where you’re located, You can get the socket organizers from harbor freight or even Amazon, and the plier racks are on EBay, Amazon, and at harbor freight
Thanks! I got the rack on eBay, here is the link to one. www.ebay.com/itm/353038673798?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CBt0gXy9SoK&sssrc=2349624&ssuid=yI5Db4cPS2u&var=&widget_ver=artemis&media=COPY
![FIND a BETTER DEAL!! US General 5-Drawer Mechanic's Cart ToolBox [56429]](http://i.ytimg.com/vi/eRFyaq0MSE8/mqdefault.jpg)
![FIND a BETTER DEAL!! US General 5-Drawer Mechanic's Cart ToolBox [56429]](/img/tr.png)
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
Glad I'm not the only one who got a white one
Love the lights. Good vid!!
Thank you!
Take a look at the m12 tools. The rachets and right angle die grinder are great, I use them daily in my fabrication work. They compliment my 20v tools quite well.
I definitely will. I’ve been contemplating pulling the trigger on either the Milwaukee long reach or the snapon long 14.4. I know there’s pros and cons with each, I just haven’t been able to convince myself which one to try out first yet. Thank you for watching
@richardsgarage6697 the only snap on power tool we still use is the drills. Not that they're anything special, but we may aswell keep them if they work. The others, 3 impacts a ratchet, an angle grinder and countless flashlights all sit on the shelf gathering dust, total junk. Personally I don't like the mileaukee ratchets or their beast impact as the handles are small bit they do have 3 year warranty, so we like that
Good stuff man. Love the Craftsman selection , good set up
Thanks! I appreciate the kind words, thanks for watching
For the longest time I wrote off the Craftsman Gunmetal as a gimmick. I finally held one the other day and was pleasantly surprised at how well it felt in my hand. Quickest non truck tool purchase I ever made. Only complaint is that it doesn't come in a locking flex head like my SnapOn 1/4"
A locking flex head in the craftsman gunmetal line would really change the game if they decided to make one. Thank you for watching!
I was a little bummed to see that it was sealed and non-serviceable. Is there any way to lube up this ratchet when needed?
Great review. I appreciate you have a mix of tools including, Snap On to HF. I enjoyed how you commented on specifics and how they have worked out for you. So many people bash certain brands just because of the name. If the tool works and holds up that is what really counts.
Thank you for watching! I 100% agree with you. There are some really great tools out there that some people will never try just because of a negative connotation from the brand. I really appreciate your nice comment
The way you feel about the craftsman 1/2dr ratchet is how I feel about the ICON ratchets. I've got 5 of them 1/4dr roto, flex and fixed head comfort grip. A regular 3/8dr and a regular 1/2dr. I highly recommend them.
I do not have one but I understand what you are saying. I definitely have thought about trying one out but just haven’t yet, I probably will try the Icon 1/4 soon. Thank you for watching!
Thanks for the tour! Craftsman actually sent me that 120 tooth ratchet after I warrantied my old US made ratchet, and its good to hear that it works well. I was a little bummed after I saw it was sealed and you couldn't repair or even lube the ratchet. Appreciate the review.
Man I’ve got the same cart and had the same issue with the drawers. If you grab the front of them and slowly pull out hard, the slides will come out like they’re supposed to and work right from then on. The drawers actually come out to where the back is flush with the front of the cart
Oh interesting, I’ll try that method. Thanks for watching!
Your channel popped up on my feed and glad it did! Good to know I’m not the only one who likes those craftsman ratchets. Great content. Keep it up.
Thank you for the kind words!
Thank you for the kind words!
Why have tools you never use in your cart? Btw, since the 1960's, a rolling wedge has been called a "lady slipper" because it's hard and doesn't flex, not like a foot.
I do use most of them, my cart acts as my main storage at the moment, I don’t have another box to store stuff I don’t use on a daily basis so I leave most everything in there for a rainy day.
Nice cart, awesome tools.
I've been a mercedes guy for years now.
1973 S 450
1989 SEL 560
2001 E320
2012 C300
Great cars, never disappointed.
Thank you! You have a fantastic fleet
Where do you get the storage trays and plier rack from. Just bought one and trying to organize everything
Depending on where you’re located, You can get the socket organizers from harbor freight or even Amazon, and the plier racks are on EBay, Amazon, and at harbor freight
i like your pliers organizer..where did you get it?
Thanks! I got the rack on eBay, here is the link to one.
www.ebay.com/itm/353038673798?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CBt0gXy9SoK&sssrc=2349624&ssuid=yI5Db4cPS2u&var=&widget_ver=artemis&media=COPY
3/8 bent handle flex head locking by mac is sex
You can buy a complete full set of wrenches from Walmart for $20 a set to add to your wrenches. Looks like nice sets and they don’t skip sizes
Whats the model number on that Dewalt 1/4 inch impact wrench on the left side of the drawer?
I believe it is the DCF887
@@richardsgarage6697 That appears to be the impact driver, I was referring to the impact wrench on the left of the drawer.?
I wanna say "That's a lot of sockets", then I look at how many I have...
Awesome setup! You’ve got some great stuff 👍🏻
Thank you!
i love the new craftsman ratchets
I haven’t had many but the ones I do use sure are great!
Craftsman and pro are two words that shouldn't go together after the year 2007
Where did u get the Mac sticker
It’s on eBay
I can't believe you use a torque wrench like that
Old reliable!
Never requires calibration!
Why does it say MAC
It identifies as mac
How wide is that Mac sticker? 3 5 or 7in?
4” wide 2.5” tall
Where did you get it? My mac guy doesnt carry them!