I am a mechanic, guitar , and gun guy, I have had everything over the last 50 years. Snap-on , craftsmen, mac, Matco, and I bought my first US General about 3 years ago and my next will be the 72” floor cabinet and 52” top box
I did the side box on the cart many many moons ago , didn't take to long for me to make a full frame of steel angle iron to keep it from tipping , very handy box for cheap 💰, use it every day
I work out of a US General every day. That box and what's in it provide food and shelter for my family. If it's good enough to get that done, I'll use it til the wheels fall off. God bless Texas.
hey Buddy i’m a retired Woodworker and we used a ton of the similar full extension roller bearing slides that are of your carr’s and boxes i heard you say oil a couple of times and fyi all the manufactures we used reccomended using nothing but Graphite on them so take that as you want oil does have a tendency to allow dirt and debris to stick to it and the graphite of course is a dry powder now i will admit that i have used a drop or two of 3 in one oil in my life but i did follow manufacturers reccomendations on the slides btw a tube of graphite has lasted me over 25 years and we built hundreds of cabinets with that style slide i too ama big fan of the older made in USA Craftsman ratchets although my go to are my Dads 1958 Sk Wayne he bought in the Navy and i inherited my Dad and i restored some Antique British Sports Cars i use a 1970s Craftsman 1/2 inch Digitorq that been calibrated and hasn’t let me down yet
So I have been a mechanic since 99' and comparing these US Gen carts to Snap-on or Mac is a no brainer. The same box from either is going to easily be 1-1.5k$. They carry the same warranty and pretty much made from the same materials ( mind you that Snap-on and Mac may be a bit thicker ). I have sold all my Snap-on and Mac carts and Boxes and gone to the Husky and US gen carts and tool boxes. they are yet to fail me in the last 8 years. For entry level and even the seasoned tech/mech these are wonderful and very useful tool boxes and carts. I have this same cart in black that is primarily used for light duty and race track/ track day use. Carries plenty of tools and handles the weight just fine.
I got the series 2 of this cart in Orange last month. I build out GM crate motors into marine engines. I upgraded from a 30" HF single 1 drawer cart. The side cab is an interesting mod. It is my understanding that Quinn is now manufactured by same company that makes Kobalt and Gear Wrench. I have a coworker that has Kobalt sockets they look identical to Quinn other than the branding.
This is an old video but.... I’ve used my hf cart for 10 years every day as a professional technician and I will say after the years it’s held up 100% I have literally beat the handle off it and both front corners with a pry bar and hammers from frustration or anger and it’s still going strong... best 125$ I’ve ever spent as a professional tech
For the side locker 2 Standard OEM swivel casters could had been installed were that the whole unit would have 6 total casters combined and the 2 locking casters could still be utilized to keep the unit stationary and a metal spacer support under the locker would fill the void of the height differential between the locker and floor once the casters are mounted
If you want a set of good gear wrench ratcheting wrenches I recommend the 35720 set it’s a 20 piece set but it has all the sizes you’ll ever need to use a ratchet wrench for
That is exactly what I wanted to do ... thank you for showing about “grinding / cutting” the arches for the top lid to close on the side box - mine will be white or yellow since it will be inside (cleaner environment dealing with medical equipment / not mechanic shop)
Man I've been using 90 tooth Gear Wrench ratcheting wrenches forever and never even slightly bent or broken a single one in 10 years. Can't beat em. They could be a little smaller profile but nevertheless they have been perfect
and you can always pick up the original design gear wrench ratchet wrench set like the one's you fixed that were stuck on both eBay and Amazon and usually napa for about $65 it's a 20pc set,some are on a grey tray holder, but my set was black and ace hardware specific and came with the 1/2 inch 3/8 drive socket adapter and the 13 or 14 mm socket adapter for putting in the box end of the ratchet wrench and using sockets.
Home Depot made me buy that $9 kit 1/4 and 3/8 also, and 28 wrenches 🔧 for $15 I have the husky 268 kit for going mobile, I added some pliers and adapters an 8 mm wrench 🔧 and removed the 12 pts to save weight
I was looking for ratcheting wrenches just like you. Found something that mattered to me, may interest you. Tekton makes 6 point ratcheting flex wrenches. Couldn't find any other decent company that did.
This is the same route I'm looking at going for my ratcheting wrench needs @ work... One because no missing sizes that they do... Also because I can order a matching 7mm to cover all the sizes I need @ work..
I feel lucky, I have a full set of American sockets in all 3 sizes, full set of open end SAE and Metric, Full set of SAE and Metric combination, and a full set of SAE and Metric boxed end wrenches. A lot of over kill but worth more than I paid.
I have a set of Craftsman 1/2 drive sockets that have put everything together Ive done since 1995. I hate the ratchet that came with them.I wanna throw it over the fence every time I use it.It is really bad to jump out of gear. It always has even when oiled.Im gonna buy a Wright or Proto one of these years LOL.
two years ago I bought the industrial Pittsburgh punch and chisel set I don't know if it is decent haven't had to use it,I had a craftsman and a full companion set from Menards and now they all but 3 of each of just the chisels, and one of each brand of punch vanished out of my truck.. and I have a old craftsman but it doesn't say Sears it is a bright unfinished steel look it's a bigger chisel..
I know this video is 2+ years old. But Lowes will warranty ALL Craftsman and replace them with (Stanley) Crapsman. Actually they’re not that bad still made in China/Taiwan but so are Bluepoint, Mac, Marco, just about all If you want US pretty much it’s SK, Proto, SnapOn. The 2nd gen Icon sockets are decent. Truthfully who ever has the least hassle free warranty that is “local” my only gripe with Milwaukee, Tekton, Gearwrench is the photo/mail in warranty. I’d rather use HF,HD,Lowes where I can replace the 1 tool I don’t have a duplicate of to complete a job. Waiting for mail sucks so you end up buying a local tool anyway.
If you have a napa in your area they warranty gear wrench. I had to wait for them to order my 17 mm flex and took about a week but i did get it replaced for free without proof of purchase
Hey love the tour of the tool box! Question, how did u add the side tool box drawer/cabinet? Please I'd appreciate the set up procedure thank you in advance. I currently have 30 inch 4 drawer us general.
I got craftsman 1/4 drive snap on 3/8 drive and teckton 1/2 drive. I got snap on because I use 3/8 for everything I can. I’ve got nothing to complain about for any of my socket brands. On the other hand my teckton Rachet rounded off. I believe it’s just a flaw in the one rachet but it feels high quality. Just stay away from Pittsburgh. The life time is good. But it’s there for a reason.
@@fixedroofcoupe excellent, can’t wait. Just came across your channel and loving it. But I’ve found out who’s my competition at flea markets! I’m always looking for 6 points and USA Crafstman. Nice to see another like mind.
I am not a mechanic (at all), but i purchased this cart to store my woodworking tools and all of the other misc tools (electrical, diy stuff for around-the-house upgrades, small stuff that seems to be everywhere between my garage and laundry/storage room, and i appreciate the reviews, particularly how its organized. i have no idea where i am putting all of my stuff, but i do like your set up for sockets and wrenches, as thay nevered occured to me (even though my collection isnmuch smaller). can you share where you got the stands for the wrenches and socket stands?
Socket stands I got at Sears when they were still opened. Can get them online and harbor freight sells them now as well. The wrench’s are on the magnet strips harbor freight sells
I have the gen 2 roller cart and literally yesterday one of my locks popped off, i put it back together it didnt break but definitely made me a bit annoyed
I am interested in the side cart mod? I have a gen 1 tool cart. The side cart now seem like they are deeper than the cart. any suggestions? I would love to do this mod
Roberto Kellner friend of mine lived there for 12 years. His buddy owed a Mercedes dealership and gave him a bunch of old ones the last time he went. So he hung me up in my garage.
Danny Callihan i went to Lowe’s. They took care of me. If you call then they give u a number to call. You have to set an account up then buy it online they credit you bla bla. I just went to Lowe’s
@@fixedroofcoupe some of the web pages or even some of the salads have a share icon I don't know if you have an Android device but there's usually a share icon what you can share it with other people
Lid opens to 90 degrees.... cylindrical lock..... and the name plate are all dead give aways that it is NOT an older model. I have one older model and 2 newer ones... Not sure why you are falsely claiming it is an older model..... but that model you are showing is new as hell
The title says tool cabinet review but the review is 22 minutes long and a majority of it is about off topic things such as the tools around the box. I always get excited when I see reviews for tools 1-2 years later (everyone likes to review "new" out of box which helps no one), but I simply don't have time to watch a 22 minute video about tools when the title says tool cart/cab review!
I am a mechanic, guitar , and gun guy, I have had everything over the last 50 years. Snap-on , craftsmen, mac, Matco, and I bought my first US General about 3 years ago and my next will be the 72” floor cabinet and 52” top box
Steven Robertson hit me up on ig FixedRoofcoupe I’m always shreddin
I did the side box on the cart many many moons ago , didn't take to long for me to make a full frame of steel angle iron to keep it from tipping , very handy box for cheap 💰, use it every day
I work out of a US General every day. That box and what's in it provide food and shelter for my family. If it's good enough to get that done, I'll use it til the wheels fall off.
God bless Texas.
hey Buddy i’m a retired Woodworker and we used a ton of the similar full extension roller bearing slides that are of your carr’s and boxes i heard you say oil a couple of times and fyi all the manufactures we used reccomended using nothing but Graphite on them so take that as you want oil does have a tendency to allow dirt and debris to stick to it and the graphite of course is a dry powder now i will admit that i have used a drop or two of 3 in one oil in my life but i did follow manufacturers reccomendations on the slides btw a tube of graphite has lasted me over 25 years and we built hundreds of cabinets with that style slide i too ama big fan of the older made in USA Craftsman ratchets although my go to are my Dads 1958 Sk Wayne he bought in the Navy and i inherited my Dad and i restored some Antique British Sports Cars i use a 1970s Craftsman 1/2 inch Digitorq that been calibrated and hasn’t let me down yet
So I have been a mechanic since 99' and comparing these US Gen carts to Snap-on or Mac is a no brainer. The same box from either is going to easily be 1-1.5k$. They carry the same warranty and pretty much made from the same materials ( mind you that Snap-on and Mac may be a bit thicker ). I have sold all my Snap-on and Mac carts and Boxes and gone to the Husky and US gen carts and tool boxes. they are yet to fail me in the last 8 years. For entry level and even the seasoned tech/mech these are wonderful and very useful tool boxes and carts. I have this same cart in black that is primarily used for light duty and race track/ track day use. Carries plenty of tools and handles the weight just fine.
I got the series 2 of this cart in Orange last month. I build out GM crate motors into marine engines. I upgraded from a 30" HF single 1 drawer cart. The side cab is an interesting mod. It is my understanding that Quinn is now manufactured by same company that makes Kobalt and Gear Wrench. I have a coworker that has Kobalt sockets they look identical to Quinn other than the branding.
This is an old video but.... I’ve used my hf cart for 10 years every day as a professional technician and I will say after the years it’s held up 100% I have literally beat the handle off it and both front corners with a pry bar and hammers from frustration or anger and it’s still going strong... best 125$ I’ve ever spent as a professional tech
For the side locker 2 Standard OEM swivel casters could had been installed were that the whole unit would have 6 total casters combined and the 2 locking casters could still be utilized to keep the unit stationary and a metal spacer support under the locker would fill the void of the height differential between the locker and floor once the casters are mounted
If you want a set of good gear wrench ratcheting wrenches I recommend the 35720 set it’s a 20 piece set but it has all the sizes you’ll ever need to use a ratchet wrench for
That is exactly what I wanted to do ... thank you for showing about “grinding / cutting” the arches for the top lid to close on the side box - mine will be white or yellow since it will be inside (cleaner environment dealing with medical equipment / not mechanic shop)
All my craftsman USA sockets and wrench sets I’ve pieced together from pawn shops. A lot of the have individual sockets sorted out in bins
Great set up you have there,, The real man cave..good review on tools from harbor freight,,,,thanks
Hope it helps out man
Man I've been using 90 tooth Gear Wrench ratcheting wrenches forever and never even slightly bent or broken a single one in 10 years. Can't beat em. They could be a little smaller profile but nevertheless they have been perfect
and you can always pick up the original design gear wrench ratchet wrench set like the one's you fixed that were stuck on both eBay and Amazon and usually napa for about $65 it's a 20pc set,some are on a grey tray holder, but my set was black and ace hardware specific and came with the 1/2 inch 3/8 drive socket adapter and the 13 or 14 mm socket adapter for putting in the box end of the ratchet wrench and using sockets.
Home Depot made me buy that $9 kit 1/4 and 3/8 also, and 28 wrenches 🔧 for $15 I have the husky 268 kit for going mobile, I added some pliers and adapters an 8 mm wrench 🔧 and removed the 12 pts to save weight
If you want to complete a Craftsman 6-point socket set an have some already, try a pawn shop. Not the most reliable source, but can be very cheap.
I was looking for ratcheting wrenches just like you. Found something that mattered to me, may interest you. Tekton makes 6 point ratcheting flex wrenches. Couldn't find any other decent company that did.
nothing wrong with Tekton!
This is the same route I'm looking at going for my ratcheting wrench needs @ work... One because no missing sizes that they do... Also because I can order a matching 7mm to cover all the sizes I need @ work..
Looking for tool deals at Flea Markets and Pawn Shops...My kinda people!!!! Great vid
Midwest Tool Review thanks man. The best place to get quality stuff at a bargain!
I feel lucky, I have a full set of American sockets in all 3 sizes, full set of open end SAE and Metric, Full set of SAE and Metric combination, and a full set of SAE and Metric boxed end wrenches. A lot of over kill but worth more than I paid.
I have the (2)HF 44 boxes the drawer size works better for me. Good collection of tools.
If you're still looking for sockets will sell you metric and sae sockets from armstrong, they're 12 point but they're really nice us sockets
Very nice! I may do you combo over buy a 44” US General box.
Tekton totally make a full kit for your back row. I just picked em up. 10 - 24 1/2 impact 6 point. Fidy bucks. Totally worth it. Love em!
I had reinforced the bottom of the cart with 1/4" steel angle iron from rolling into my garage!
It's funny that Craftsman have become "worth money". Back in the 90's when they were still made in U.S.A. most people considered them junk.
S L it’s crazy isn’t it. I’m happy their stuff is coming back here tho.
I have a set of Craftsman 1/2 drive sockets that have put everything together Ive done since 1995. I hate the ratchet that came with them.I wanna throw it over the fence every time I use it.It is really bad to jump out of gear. It always has even when oiled.Im gonna buy a Wright or Proto one of these years LOL.
A rebuild kit for the Craftsman ratchet will return the performance to new. It's satisfying to return a tool to life.
i would suggest trying to get your swivel casters on the side with the handle just so you can get the cart away from the wall a little easier
SillyBarney Gaming I don’t move it. I’m also unloading it in a few weeks when my 72 inch comes in.
Fixed Roof Coupe i know lmao i spoke too soon i just saw the part where you said you keep it stationary lol
SillyBarney Gaming all good. 🤙🏻
I can get a set of 6 point usa made craftsman any time down the street from me a an outlet store they have a whole bunch of NOS stuff. 40 bux. 8-19mm
Andrew Hutchinson I found a set on eBay last week. 🤙🏻
New Subscriber....I have an '04 Corvette Z-06
two years ago I bought the industrial Pittsburgh punch and chisel set I don't know if it is decent haven't had to use it,I had a craftsman and a full companion set from Menards and now they all but 3 of each of just the chisels, and one of each brand of punch vanished out of my truck.. and I have a old craftsman but it doesn't say Sears it is a bright unfinished steel look it's a bigger chisel..
I know this video is 2+ years old. But Lowes will warranty ALL Craftsman and replace them with (Stanley) Crapsman. Actually they’re not that bad still made in China/Taiwan but so are Bluepoint, Mac, Marco, just about all If you want US pretty much it’s SK, Proto, SnapOn. The 2nd gen Icon sockets are decent. Truthfully who ever has the least hassle free warranty that is “local” my only gripe with Milwaukee, Tekton, Gearwrench is the photo/mail in warranty. I’d rather use HF,HD,Lowes where I can replace the 1 tool I don’t have a duplicate of to complete a job. Waiting for mail sucks so you end up buying a local tool anyway.
If you have a napa in your area they warranty gear wrench. I had to wait for them to order my 17 mm flex and took about a week but i did get it replaced for free without proof of purchase
My most recent cart is that make/model/color of your H-F. And I have an 8 YO Matco tool cart which IMHO is NOT worth 5 times the $
Hey love the tour of the tool box! Question, how did u add the side tool box drawer/cabinet? Please I'd appreciate the set up procedure thank you in advance. I currently have 30 inch 4 drawer us general.
Have to watch the whole video. It’s in there!
Go for the teckton it’s right there with snap on and less then half the price. Teckton is the way to go
I got craftsman 1/4 drive snap on 3/8 drive and teckton 1/2 drive. I got snap on because I use 3/8 for everything I can. I’ve got nothing to complain about for any of my socket brands. On the other hand my teckton Rachet rounded off. I believe it’s just a flaw in the one rachet but it feels high quality. Just stay away from Pittsburgh. The life time is good. But it’s there for a reason.
im sorting threw my tools in my shop i have tons of old miss matched craftsman, ill see whats left over
I like to see bout that to if you don’t care
I love the tool collection. How long did it take for you to acquire all of this?
Been working on it since highschool. Sooo 17 years lol
Money needs to go into tools, not into storage. USG is more than good enough IMHO. Going into debt to the tool guy for a box is crazy.
lowes kobalt 6 point 8 to 19 no skips 14.97
New sub, love the channel. Can you do a review of your compressor?
Shoga 72 that’s actually a upcoming video I was planning on doing lol
@@fixedroofcoupe excellent, can’t wait. Just came across your channel and loving it. But I’ve found out who’s my competition at flea markets! I’m always looking for 6 points and USA Crafstman. Nice to see another like mind.
I am planning to get the side box, and the cabinet for mine but the have not made them in white like my cart
Good review man
The Backwoods Mechanic thanks man. I really appreciate it. 🤙🏻
I am not a mechanic (at all), but i purchased this cart to store my woodworking tools and all of the other misc tools (electrical, diy stuff for around-the-house upgrades, small stuff that seems to be everywhere between my garage and laundry/storage room, and i appreciate the reviews, particularly how its organized. i have no idea where i am putting all of my stuff, but i do like your set up for sockets and wrenches, as thay nevered occured to me (even though my collection isnmuch smaller). can you share where you got the stands for the wrenches and socket stands?
Socket stands I got at Sears when they were still opened. Can get them online and harbor freight sells them now as well. The wrench’s are on the magnet strips harbor freight sells
Took box tour for the truck! Please lol
Hey men you wouldn't mind throwing me a 14 and 15 metric 3/8dr craftsman socket I just need them two to complete my collection
I'd be interested in a review of the shelving bin system beside it.
I have the gen 2 roller cart and literally yesterday one of my locks popped off, i put it back together it didnt break but definitely made me a bit annoyed
ThatOne HardflipGuy that’s why you buy snap on buddy
Honest question here is there a difference with china and US Craftsman, other than being able to say "I got all American made!"
Socket quality for sure. But they are coming back to the us finally.
NICE!!
Is that the 16.5 side box? I need sliders and a drawer for mine and I don't have the model number.
I am interested in the side cart mod? I have a gen 1 tool cart. The side cart now seem like they are deeper than the cart. any suggestions? I would love to do this mod
I would think just grind the lip to fit accordingly on the side?
Who makes those peg style socket organizer? Definitely could use several of those.
Those are Hansen global but harbor freight has us general which are essentially the same.
@@fixedroofcoupe Great video! I watched a few times and scrolled through the comments to figure it out, thanks for the info!
Do you wrenches fall off when you Shut your lid ?? I found their magnets to not be as strong
Johnny Quevedo mine stay put when I close it. I also don’t open and close it often.
*looks at thumbnail*
What?! There's a side attachment for a extra tool box?!?!?
What‘s the story about the german licence plates?
Roberto Kellner friend of mine lived there for 12 years. His buddy owed a Mercedes dealership and gave him a bunch of old ones the last time he went. So he hung me up in my garage.
@@fixedroofcoupe ... Don't lie to us, those are Trophies from Mercedes Driver you hunted down! :(
Can you link the side drawers for the cart
Will jack stands fit in the open space on the bottom?
Can you add the side cabinet to both sides of of the roll cart
I don’t see why not. A little reinforcement may be smart tho.
I Want This soooo Bad But Dammmmmm Mannnnnn, HF Shipping fee *$96.94?!! HF ARE YOU CRAZY!!* Well I Guess I'll Ummm,..Ummm...
OCD gear heads unite!
Yessir!
Get the Icon sockets :)
Barry Everson I’ve been thinking about it man!!!
I've had snap on for a long time and the icon sockets are perfectly fine for every day use . I like them and you can't beat the price
Barry Everson awesome! I want to get some more of their stuff for sure!
Guess I'm glad I'm from Pittsburgh not really alot of crimes down here even done to me and my dad lol
Check out tekton. Good tools for the dollar
Surprised you have not tried tekton tool ?
WHERE DID YOU GET THE SIDE BOX ?
aux1z11 harbor freight
@@fixedroofcoupe Thanks I should of looked first.
Do American made craftsman have labels on them, indicating US made?
They sure do. Says made in USA right on them.
Go to 72 inch box from HF
james guralski I did. If you scroll through my videos I did an update after this. Just waiting for it to come in.
Are those wagon wheels?
Jim Johnson the c5 wheels?
@@fixedroofcoupe Yeah, first video... I watched some more of yours and realize you have a C5, obviously C5 wagon wheels then.
You're like me, you have a pair and a spare of everything. That's because you're going to break one, lose one and use one.
You’re dam right my friend!!
3:06 - you said do do.
Craftsman still going to warranty with sears shut down?
Danny Callihan i went to Lowe’s. They took care of me. If you call then they give u a number to call. You have to set an account up then buy it online they credit you bla bla. I just went to Lowe’s
Go check out tekton.com if your looking for complete 6 point socket sets.
Hi. Link to eBay seller for craftsmen rebuild kit for ratches
james guralski won’t let me post the link but username is craftsman3180
@@fixedroofcoupe copy n paste the URL link
@@fixedroofcoupe some of the web pages or even some of the salads have a share icon I don't know if you have an Android device but there's usually a share icon what you can share it with other people
james guralski www.ebay.com/itm/192772528665 worked this time.
@@fixedroofcoupe your the best
Chinese products tend to start out good but then they start to cut corners after a few years .
Lid opens to 90 degrees.... cylindrical lock..... and the name plate are all dead give aways that it is NOT an older model. I have one older model and 2 newer ones... Not sure why you are falsely claiming it is an older model..... but that model you are showing is new as hell
The title says tool cabinet review but the review is 22 minutes long and a majority of it is about off topic things such as the tools around the box.
I always get excited when I see reviews for tools 1-2 years later (everyone likes to review "new" out of box which helps no one), but I simply don't have time to watch a 22 minute video about tools when the title says tool cart/cab review!
Craftsman never made. Much in the1/2 socket line
I love how folks brag about their poorly organized shit!,