Hello. That the six positions switch would work normally, it is enough to cut it to 60%, the minimum and maximum frequencies are not 100% as for all channels, but 60%.
Very informative video. I think it's way easier using this tool...Do you recommend to use qgroundcontrol station instead of missionplanner for setup the pane?
Bom dia Andrew Deus abençoe sempre, é um sistema desse que eu quero colocar futuramente em um planador melhor que eu estou montando,um stratos de 2 metros, pra fazer vous mas longe, é mas autos !
@@AndrewNewton I use RM boxer, pixhawk mini, and ep1 RX form happy model, I try to connect in telemetry port and i didn’t have a telemetry on my radio, but I have a rc link
Really appreciate you posting this video - helped me a ton!
Great to hear!
Thanks Andrew, great overview of setting up ArduPilot with QGroundControl.
Look forward to seeing additional videos in this series, as you explore and experiment.
Timestamps:
00:00 - Intro
01:34 - ArduPilot Website
02:20 - QGroundControl Install
02:54 - Referencing FCB Documentation (eg: F405-Wing FC)
04:50 - Load ArduPilot Firmware
07:10 - QGroundControl Setup
08:47 - Calibrate Accelerometer
09:53 - Plane Model Setup, in the Radio (eg: Boxer)
11:40 - Calibrate Radio
12:49 - Flight Modes
13:50 - Arming Checks
14:21 - Parameter Setup
17:41 - Throttle and Servo Setup
20:35 - Mount FCB in Plane (eg: LTE Rambler RS)
21:41 - Check flight control movements in FBWA Mode
23:40 - Check flight control movements from Radio stick inputs
24:41 - OSD Setup and Font change
27:05 - Checking Satellites and Arming (outside)
Thanks for the timestamps. I'll add them
Ardupilot is the way to go!
Arduplane is the way to go! Well done Andrew!
There is a bit of a learning curve with a Ardupilot, but it is fantastic works very well.
Many thanks for this video!
nice Job :)
Well explained. Thanks
Great stuff! Thanks Sir Andrew! Good to know there are alternatives to Mission Planner 😊
Liked this how to a lot, many thanks Andrew!
👍💪✌
Glad you liked it!
@@AndrewNewton thank you.
Andrew,, always a pleasure, thank you.,,
Discontinued, is how I feel these days.. Until they ask for me to fixit...
Thank you for the video. It😊 helped out tremendously.
Can you explain in detail where I put the font?, I put it on Micro SD and set OSD_Font to value 2, no results, the font doesn't change
Just copy the file to the card, not in a folder. That's all I did.
@@AndrewNewtonthanks, this works
Excellent news. I barely know what I am doing with ArduP @@DianKuChannel
More patience than I have.
thank you for using a a MAC on this
Thanks. That's why it was worth a video.
Hello. That the six positions switch would work normally, it is enough to cut it to 60%, the minimum and maximum frequencies are not 100% as for all channels, but 60%.
Aha great tip thanks. I'll include that in the next video.
This what o waiting for...
How about for vtol QGC and mac
And INAV coming soon hopefully
@@AndrewNewton owfully INAV available for VTOL... QGC or ardupilot little bit make make me confuse to setup...
Very informative video. I think it's way easier using this tool...Do you recommend to use qgroundcontrol station instead of missionplanner for setup the pane?
MissionPlanner is not available for Mac
Bom dia Andrew Deus abençoe sempre, é um sistema desse que eu quero colocar futuramente em um planador melhor que eu estou montando,um stratos de 2 metros, pra fazer vous mas longe, é mas autos !
FPV thermal gliders can get out of sight without knowing. Good project idea
Can I get telemetry in my TX with elrs on f4 board??
Depends on which Tx, board and your ELRS settings
@@AndrewNewton I use RM boxer, pixhawk mini, and ep1 RX form happy model, I try to connect in telemetry port and i didn’t have a telemetry on my radio, but I have a rc link
Thanks for the guide Andrew!! Added to my saved list for a future project.
Glad it was helpful!