If you want to change the spray pattern direction (vertical vs. horizontal), simply remove the alignment pin and move it to a different location. Page 8 of manual 3A0149 covers this: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-F.pdf
We recommend using lubricant 111265 on these parts every week: • Trigger pivot pin • Both sides of the gun where the trigger contacts the gun body • Fluid needle shaft, behind trigger
Please atleast attach any captions or audio to the videos and i aam not able to knoww that whats the parts are called. I waanted to know which part of that gun is called what
Step-by-step maintenance instructions that identify what part of the gun is called what start on page 14 of manual 3A0149, G15/G40 Spray Gun, Instructions/Parts: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-G.pdf We are sorry that the lack of audio and captions made this video difficult to understand. Since the gun shown has been obsoleted, the addition of captions or audio is unlikely.
Here's a link to find a distributor near you where you can purchase the kit: www.graco.com/us/en/in-plant-manufacturing/how-to-buy/where-to-buy.html The seal kit you need depends on your gun model. Information in manual 3A0149 can help you figure this out: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-G.pdf
You can purchase the tools at a Graco authorized distributor. Here's a link to find one near you: www.graco.com/us/en/in-plant-manufacturing/how-to-buy/where-to-buy.html
The lube we used is a non-silicone gun lubricant, part #111265. Yes. The video would be better if we talked through the rebuild procedure. This was one of our very first videos. At that time, we were not using audio.
This was great help thanks👍👍👍
Glad it helped!
With my G40 Spray gun am I supposed to remove the air cap alignment pin from the air cap?
If you want to change the spray pattern direction (vertical vs. horizontal), simply remove the alignment pin and move it to a different location.
Page 8 of manual 3A0149 covers this: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-F.pdf
Any lubrican recommendations?
We recommend using lubricant 111265 on these parts every week:
• Trigger pivot pin
• Both sides of the gun where the trigger contacts the gun body
• Fluid needle shaft, behind trigger
Thanks
Please atleast attach any captions or audio to the videos and i aam not able to knoww that whats the parts are called. I waanted to know which part of that gun is called what
Step-by-step maintenance instructions that identify what part of the gun is called what start on page 14 of manual 3A0149, G15/G40 Spray Gun, Instructions/Parts: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-G.pdf
We are sorry that the lack of audio and captions made this video difficult to understand. Since the gun shown has been obsoleted, the addition of captions or audio is unlikely.
Greetings,
Is there a link to purchase this repack kit for the G40 gun?
Others I’ve found have way less pieces, thank you.
Here's a link to find a distributor near you where you can purchase the kit: www.graco.com/us/en/in-plant-manufacturing/how-to-buy/where-to-buy.html
The seal kit you need depends on your gun model. Information in manual 3A0149 can help you figure this out: www.graco.com/content/dam/graco/tech_documents/manuals/3A0/3A0149/3A0149EN-G.pdf
Where can I purchase the tools, I bought a g40 used and need to rebuild it
You can purchase the tools at a Graco authorized distributor. Here's a link to find one near you: www.graco.com/us/en/in-plant-manufacturing/how-to-buy/where-to-buy.html
No volume on my end...a little talk through would be great, along with what actual lube is being used.
The lube we used is a non-silicone gun lubricant, part #111265.
Yes. The video would be better if we talked through the rebuild procedure. This was one of our very first videos. At that time, we were not using audio.