This is too rad! Awesome work man. Didn't like the first turbo brace? Or was it just for mock up anyways? Either way the new one is really cool! Wish we could see a shed skid. ;)
Great turbo build. Wish you could have shown how you fabricated your exhaust manifold/pipe. Curious how this turbo will do coupled with a dieselpumpUK pump in there. You should get some dyno before/after numbers
Dude awesome content man!! Love these old mercs. Question, why didn’t you just delete the pcv valve and run it to the atmosphere instead of putting it back into the intake?
Thanks. It's healthier to have the crankcase under vacuum in my opinion. Yeah it's a little dirtier but this engine has 220,000 miles and I feel like without a pcv I might start pushing out some of the old gaskets. If this was a fresh motor yeah I would just have a catch can with some breathers and some AN fittings on the valve cover.
Dude can you buy a w210 and do these kinda vids. So good!!! Cheap and it works! The bag videos were awesome too and I think I’m going to follow your lead on it with my e200k
Hey man what is on it or can you just instal a big turbo on it without upgrading anything but if anything is on it to make sure it’s safe to put in the big turbo can you tell me what are the parts names and if possible provide links thank you much appreciated
Nice. But you should get an oil catch can instead of having the pcv connected directly to the air filter. You may have a bunch of oil going into the turbo with your current set up.
Any way to send you a donation man? You don't have a Patreon or anything so I just wanted to help out, I've enjoyed your content since the turbo Toyota days.
Have an 86 300sdl with the om 603 in it and I can’t find that exhaust flex piece that goes between the manifold anywhere, any chance you have a link or something? Mine is cracked as well
I found mine on ebay from someone who had 1 sitting in their garage. These can be very hard to find. I just checked and there are none for sale on ebay. Keep searching and eventually you'll get lucky.
Hey! I have a 603 with about 230k miles on it. I’m probably going to end up building it as much as possible and putting it in the 94 E420 I have. Any info on your Turbo/fuel element set up would be appreciated!
I just ordered a Garrett rebuild kit for my turbo. I plan to put a bigger turbo and cooler on it and a pump from pump uk. I need to find someone who can do the install and make it look original.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
I love it. This guy thinks like i do. I want an om603 now.
Sounds so good man! That turbo mount is solid! 🍻😎🤙
Thanks, I'm actually really happy with the amount of stress its talking off the manifold.
@@wideband hey man did u put anything on the car to put on the turbo and can u respond to my other comment plz
Good for you guy doing this car I watched others good work
This is an awesome beast 👍
Thanks!
Yaaasss!
This is too rad! Awesome work man. Didn't like the first turbo brace? Or was it just for mock up anyways? Either way the new one is really cool! Wish we could see a shed skid. ;)
First turbo brace was a little too big to work with an oil drain, a little ugly too. So we'll just say I used that for mockup lol. Burnouts soon...
Great turbo build. Wish you could have shown how you fabricated your exhaust manifold/pipe. Curious how this turbo will do coupled with a dieselpumpUK pump in there. You should get some dyno before/after numbers
Eagerly waiting for the update 😍
great work main, keep it up sick build
Wat happened to it?
Did it run
Tuned it?
Pi cuts are awesome!
Nice!!! Reminds me of my granddad's shop!!! Miss being around the shop
Awesome! She's crying out for paint and Euro headlights
This is raw power, not a beauty contest.
@@komoru so what? bit of paint and the non-awful headlights it be sweet
@@THIRSTYGUMS ABSOLUTELY CORRECT
Absolutely bad ass !!!
Dude awesome content man!! Love these old mercs. Question, why didn’t you just delete the pcv valve and run it to the atmosphere instead of putting it back into the intake?
Thanks. It's healthier to have the crankcase under vacuum in my opinion. Yeah it's a little dirtier but this engine has 220,000 miles and I feel like without a pcv I might start pushing out some of the old gaskets. If this was a fresh motor yeah I would just have a catch can with some breathers and some AN fittings on the valve cover.
@@wideband thanks! That makes sense, the older an engine the more blow by and if the blow by gets stuck in the crankcase it could be hard on stuff.
How are the bags doing one year later
Love the videos keep it up👍🏼
What has been the total build cost so far?
Bro this is so so sick
Thanks, new videos on this car are on the way.
Any more on this car? Love it!
Sorry I ended up selling this car about a year ago, so I never really made any more videos with it.
@@wideband gotcha
Dude can you buy a w210 and do these kinda vids. So good!!! Cheap and it works! The bag videos were awesome too and I think I’m going to follow your lead on it with my e200k
Hey man what is on it or can you just instal a big turbo on it without upgrading anything but if anything is on it to make sure it’s safe to put in the big turbo can you tell me what are the parts names and if possible provide links thank you much appreciated
waiting the dyno dayy and powerrrr
Is this the one for sale now on facebook? Would love to see some driving videos of it!
Did you have to adjust fuel or anything to compensate for the bigger turbo?
Where have you been? I was looking forward to more of these videos
How did you polish valve cover and intake manifoil while it was on the car?
Did you use a metal polish or did you just wetsand it?
шикарно👍, сколько примерно мощности крутящего момента и лошадиных сил получилось?????
super cool!
What mods are done to the pump ?
its been 2 years.... what happened to it???
WICKED AWESOME🤘
Nice. But you should get an oil catch can instead of having the pcv connected directly to the air filter. You may have a bunch of oil going into the turbo with your current set up.
I'll probably add one soon. I pulled the air filter off a couple times to check and it looks clean.
Info on the waste gate
Any way to send you a donation man? You don't have a Patreon or anything so I just wanted to help out, I've enjoyed your content since the turbo Toyota days.
Wow, that is a long time. I got paypal I could give you my email if you want. Any help would be awesome, thanks so much for offering!
@@wideband Feel free to DM me, I'll drop a donation your way.
why is there no video of this driving?
Have an 86 300sdl with the om 603 in it and I can’t find that exhaust flex piece that goes between the manifold anywhere, any chance you have a link or something? Mine is cracked as well
I found mine on ebay from someone who had 1 sitting in their garage. These can be very hard to find. I just checked and there are none for sale on ebay. Keep searching and eventually you'll get lucky.
@@wideband thanks man appreciate the help, any chance you’ve got a part number? I know you said their not available just might help in the search
Actually I'll do you one better I found one for sale. www.ebay.com/p/1022096291
www.pelicanparts.com/More_Info/1171420159.htm?pn=117-142-01-59-MBZ Found another one.
@@parkerfrey9861 Have you tried the dealer? MB sells it as a kit with clamps and screws. I got a new one on mine right now.
I have this merc in my possession any chance you’d wanna buy it back ?
Hello I am from France I am installing this turbo on my bmw 330d e46 m57 car but I am not sure how to install the wastegat Could you help me?
Hey! I have a 603 with about 230k miles on it. I’m probably going to end up building it as much as possible and putting it in the 94 E420 I have. Any info on your Turbo/fuel element set up would be appreciated!
Love this build mate, any update on the custom rear suspension?
Great smokes...😎😂
Why fuel cell?
I'll buy some brackets and all the hardware needed from you! 💲💲💲
What year is the car?
Where are you located and could you do this again
what happened to this project??? i wanna see and hear this thing cruising down the road...
I had to sell it about a year ago. I did drive it around, just never got the chance to make the video.
Did you pick up any power with this setup?
@@wideband did it still have the maxpeedingrods turbo? did the turbo hold up?
Nice!!!
beautifull
Damnit man, just nerded out watching this build and realized he hasn’t uploaded in over a year, dead build fuck
I just ordered a Garrett rebuild kit for my turbo. I plan to put a bigger turbo and cooler on it and a pump
from pump uk. I need to find someone who can do the install and make it look original.
Where did you get the flexpipe? Mine needs one bad.
I got lucky and found mine on ebay. Someone had a couple new old stock ones. They are a little hard to find.
@@wideband yeah these things are wacky lol. Debating on making my own manifold from scratch.
Need some follow-up videos! 🍺
What is the best way to get in contact with you sir. I promise it is not in regards to your cars extended warranty.
Business email is widebandmusic@gmail.com or if you just have a simple question I can answer it here.
Where are you from man I’m in Kansas City
how much hp?
how much horspower and nm ?
No water cooling????
Sick
Can you tell me what wheel spacers fit this car?
This 66.6 66.56 confusion is driving me nuts do I need adapters??
When I run aftermarket rims on this car I use 5x110mm/5x112mm to 5x112mm adapters. 1.25 inches wide. That was so I could run 5x112 bolt pattern rims.
Yeah I used the adapters as spacers, stock bolt pattern is 5x112 I had 5x112 rims that needed a spacer so I bought adapters.
What’s the hub bore up front do you know?
@@williamstone8782 no idea, i got non hubcentric adapters, couldnt find hubcentric
Do u run stock injection pump?
Yes, I want to upgrade that soon but it's expensive. So far mine just has ALDA deleted for the smoke and throttle response.
old skool video b roll
i am the first🙋😂
Any updates???
Who wants to buy a 1991 350 sdl?