You made that so much more difficult than you needed too. I changed all 4 of my turn signal lights in 5 minutes. There are access panels in the inner fender well just behind the lights that let you easily access the plugs for the lights. Literally a 5 minute job.
@@bitemyshinnymetalass1569 I'm not a video creator. Just look at the front of the inner fender and you'll clearly see access holes. It's pretty self explanitory.
@@scottrussell3314 ok ok. Fair enough. Well I did look underneath my work truck and there is no access holes on the inner fender. I guess I could remove the bolts holding half of the fender and pull it back to get to the turn signal bulbs
Awesome video and I started to change the lights per your video but I noticed that there is a cut out next to the light along the fender coming from the engine bay that you can reach your hand in to access these bulbs without removing everything. This will only work on the driver side. Thank you for your helpful video. I own a 2014 Silverado 1500 LTZ
2014 gmc sierra SLE There is a square hole in fender on drivers side and you can reach the light and take it out and replace bulb / Helps having small hands took 3 min
Your video was very helpful, thank you. I tried the other method of removing the air filter housing and accessing the opening in the fender but it was really difficult to go that route ( that works good for the headlight though on the passenger side). Removing the cover and pulling the light housing slightly forward worked very well. Thank you for posting this, very helpful!
Great video, thanks! Had the exact same bulb go out on me too. About to get started on changing it. Man, some where there is a GM engineer that needs his @$$ kicked for this. Hahaha. 🤣
Yo that’s a great Vid. I have to replace the bottom one and just realized that I have to go through the wheel well. Your right Ridiculous bullshit just to change a little bulb. Sucks. Thanks for the Vid😊
Passenger side not all that easy, you gotta remove the air filter box just to access the opening in the side fender and put your hand in and try to unlock the bulb
Hey I have a question my marker light is out like yours but when I hit the blinker it works it’s on the passenger side top one just like yours any tips on how to fix that I would really appreciate it
My marker lights flash when I use the remote to lock/unlock but don't come on when I turn on my headlights. Think I still need to replace them or am I just not turning on a particular switch for them?
Great video. It helped me quite a bit, but on my 2014 GMC Sierra I couldn't move the headlight housing forward enough to replace the bulb from the side. I had to remove the plastic bumper cover to be able to remove to the two lower bolts holding the housing and then it was very easy to replace the bulb. It all sounds very difficult until you've done it once and then it doesn't seem so bad.
I want to say yes there is an access hole but it was still very difficult because my arms are big and the light socket requires a slight twist but I did get it through the access hole. Nobody mentioned that you have to twist the socket before it comes out...it was a PITA that way too. Some engineer needs a butt whooping.
I just had to do this. My problem is compound, since I have a front ranch-hand on the front. I really was considering bombing chevy/GM HQ for designing something so complex.
@@jpwiththechevy6656 yah so I took it all apart replaced the bulb that was blown put all back together turn the lights on now the bottom one is out…… honestly fuck this… I guess I know what I’m doing tomorrow lol
Very helpful !! Thank you. Not hating or being that guy but I replaced the bottom bulb tonight by taking everything apart by your instructions. Just had to work around alittle bit with your hands. Thank you again though, very helpful video
@@jpwiththechevy6656 100%, I know words can be taken out of context so I wanted to say right away I’m not trying to be that guy lol your video was perfect and helped big time. Thanks again brother, take care!!!
Eric did you have to remove the bumper…My 14’ Silverado front driver side bottom running light/parking light is proving quite difficult to get at. I’ve been at it for awhile and can’t find anything online. Thx, M
@@jpwiththechevy6656 just watched your video on how to replace the running light/blinker bulb. .. Q: do you have to do so much to change the lower bulb or just remove the mud panel in the front end wheel well ??
Thanks for the video jp and Dschalid thank you!! Glad I checked the comments first cause man that was really gonna piss me off if I had to go through all that to change a GD running light lol.
You made that so much more difficult than you needed too. I changed all 4 of my turn signal lights in 5 minutes. There are access panels in the inner fender well just behind the lights that let you easily access the plugs for the lights. Literally a 5 minute job.
Should of made your own video then
Can you make a video. I want to replace the signal bulbs on my work truck if there's a easier way I would like to see how it goes.
@@bitemyshinnymetalass1569 I'm not a video creator. Just look at the front of the inner fender and you'll clearly see access holes. It's pretty self explanitory.
@@DaddySmackz I have a career and a family. I've got much more things to do than make videos.
@@scottrussell3314 ok ok. Fair enough. Well I did look underneath my work truck and there is no access holes on the inner fender. I guess I could remove the bolts holding half of the fender and pull it back to get to the turn signal bulbs
Awesome video and I started to change the lights per your video but I noticed that there is a cut out next to the light along the fender coming from the engine bay that you can reach your hand in to access these bulbs without removing everything. This will only work on the driver side. Thank you for your helpful video. I own a 2014 Silverado 1500 LTZ
i did it from both sides, got the air filter out!
Ive got a 2014 silverado too. And both drivers running lights are BOTH BURNED OUT! lucky me!
Proof once again that auto engineers are the worst people! Thanks for the video.
2014 gmc sierra SLE There is a square hole in fender on drivers side and you can reach the light and take it out and replace bulb / Helps having small hands took 3 min
Woooowwwww must be nice lol 😢
A little heads up you should do both of them when you do those little lights like that bro..just a little help for you from the chevy silverado
Your video was very helpful, thank you. I tried the other method of removing the air filter housing and accessing the opening in the fender but it was really difficult to go that route ( that works good for the headlight though on the passenger side). Removing the cover and pulling the light housing slightly forward worked very well. Thank you for posting this, very helpful!
Thanks JP!! What’s the actual bulb look like? I feel I got the wrong bulb provided by the auto parts store
Un fucking real bro I really didn't think I'd have to pull out my sockets to change a turn signal. Thanks for the vid
Thx JP …
Do you need to do the same work for the driver side bottom front end bulb in addition to removing the underneath panel by the tire ?
Thanks JP! One of my bulbs just went out a few days ago, on my 2014 LTZ! I wish You were my neighbor! You’re Awesome! 👍
There's a square hole in the fender! Reach in and access both....5 minutes 👍
But what tool to take off those plastic inserts, I'm having a hard time😢
Unbelievable: a job that would have taken me 30 seconds on my 68 Ford Custom takes 3 hours on a Suburban. And this is progress?
Great video, thanks! Had the exact same bulb go out on me too. About to get started on changing it. Man, some where there is a GM engineer that needs his @$$ kicked for this. Hahaha. 🤣
What bulb size was it??
Yo that’s a great Vid. I have to replace the bottom one and just realized that I have to go through the wheel well. Your right Ridiculous bullshit just to change a little bulb. Sucks. Thanks for the Vid😊
“Ridiculous ass issue”; you got that shit right, bro. Thanks for the video.
Passenger side not all that easy, you gotta remove the air filter box just to access the opening in the side fender and put your hand in and try to unlock the bulb
I’ve been trying to change my lights for a while they are very dim but no body can help because I have a filter I think blocking my right light
O.m.g. this is gonna be a whole day project
Hey I have a question my marker light is out like yours but when I hit the blinker it works it’s on the passenger side top one just like yours any tips on how to fix that I would really appreciate it
Yup, this video will help fix it. I had the same issue
@@jpwiththechevy6656 okay thank you so much I appreciate it
I got the same problem on a 2014 silverado but why when you turn the signal to the left it does work? But when you turn them on only the bottom works?
I’ve got the same problem old what to do
My marker lights flash when I use the remote to lock/unlock but don't come on when I turn on my headlights. Think I still need to replace them or am I just not turning on a particular switch for them?
That’s light bulb. The light bulb has two filaments in them and your running light filament is burnt out
Hell ya bro. Mine went out the same way. I'm glad you was able to help me out .. cause I was fucking over it bro. It was kicking my ass...
Thank you for the video... Ima pay someone to do it LOL Im too old to spend all day fighting with my truck. Thanks again
Great video. It helped me quite a bit, but on my 2014 GMC Sierra I couldn't move the headlight housing forward enough to replace the bulb from the side. I had to remove the plastic bumper cover to be able to remove to the two lower bolts holding the housing and then it was very easy to replace the bulb. It all sounds very difficult until you've done it once and then it doesn't seem so bad.
Thanks for the info it was very helpful and took me step by step 👍
Yessirrrr glad I could help 👍🏾
There is a square hole on inside fender that allows access to marker lamps...10 minutes 👍
I want to say yes there is an access hole but it was still very difficult because my arms are big and the light socket requires a slight twist but I did get it through the access hole. Nobody mentioned that you have to twist the socket before it comes out...it was a PITA that way too. Some engineer needs a butt whooping.
Thank you for your video, very helpful. I now know how to go about replacing my side parking light.
Glad to hear it 🙌🏾
Great instruction. I have a 2004 Silverado, but the vid was quite helpful.
can you get to this light if you take out the air box
Yes 👍🏾
I just had to do this. My problem is compound, since I have a front ranch-hand on the front. I really was considering bombing chevy/GM HQ for designing something so complex.
How did you get the clip on the bottom of the grill?
I didn’t remove the bottom of the grill, I took the four bolts off the top to pull it out some so I can adjust the headlight
@@jpwiththechevy6656 yah so I took it all apart replaced the bulb that was blown put all back together turn the lights on now the bottom one is out…… honestly fuck this… I guess I know what I’m doing tomorrow lol
I feel ya man. Sometimes you gotta take a break from it. Enjoy the weekend brother ✊🏾
Very helpful !! Thank you. Not hating or being that guy but I replaced the bottom bulb tonight by taking everything apart by your instructions. Just had to work around alittle bit with your hands. Thank you again though, very helpful video
Just trying to help. Thanks for the insight. Learn new things everyday!
@@jpwiththechevy6656 100%, I know words can be taken out of context so I wanted to say right away I’m not trying to be that guy lol your video was perfect and helped big time. Thanks again brother, take care!!!
Yea man, no problem glad I can help and I appreciate feedback ✊🏾
Eric did you have to remove the bumper…My 14’ Silverado front driver side bottom running light/parking light is proving quite difficult to get at. I’ve been at it for awhile and can’t find anything online.
Thx, M
It’s right there nah bruh I’ve been here for fkn 45 mins grills off and headlight still doesn’t wanna bulge
Awesome video! Thanks so much for posting this!! Saved me a lot of work
Did not have to take anything apart, there is a hole in the side to stick your hand in and get the light bulb out.
Thank you for your help 🤙🏾👌🏾👊🏽🎯
Broooooo... thank you so much for the video!! What a pain in the ass.. 🤣😂
Man I bought the bulb got home and realized I had to take all that off. Engineers strike again
😂 I thought the same thing bro, all for a f***** parking light 💡
@@jpwiththechevy6656 just watched your video on how to replace the running light/blinker bulb. ..
Q: do you have to do so much to change the lower bulb or just remove the mud panel in the front end wheel well ??
Reach into the square hole in the driver fender and pull the light out. Easy peasy. Thanks for the write up though.
Thanks fella sure give me a better idea on what to do that's for sure
Great video! Short and to the point! Thanks!
Hell yea bro thanks for the vid brotha. Your the man.
I don’t understand how you did this
I remember the days when silverado headlights were removed with two L pins in all of 20 seconds. So sad to see the serviceability suffer like this.
Thanks brother, good video.
Thanks bro helped a lot
Great vid JP. Helped me change mine!
Telling the wrong info on every step. Lol i love youtube 🤣
Appreciate it dawg
You would think access could be made at the wheel well.
Good vid. But you can reach in from under the hood thru the hole in the fender too!
Didn’t know that one. Appreciate it
Thanks for the video jp and Dschalid thank you!! Glad I checked the comments first cause man that was really gonna piss me off if I had to go through all that to change a GD running light lol.
I just came to say this also
That’s the video I’d like to see then, cause I couldn’t access it from under the hood…
@@sao6785 Dont do videos, but right in thru hole in fender.
Great video, thank you!
Thank you for this helpful video. :)
Thanks for video, great help 👍
The hole in the fender with no tools
Thanks man
Nice video, thanks
No wonder the dealership charged me $95 to replace the bulb!
You’re helping me… I figured it was a pain in the ass
Seems like the newer the vehicle the more difficult 😞
Tear down the front end ,to change a light bulb 😂😂😂😂 that’s funny
You don’t have to do any of that shit. There is a opening in the fender that you can reach the bulb. Simple.
Thanks a lot...
Thanks
Thank you 🙏
Glad I can help
Thanks bro!!!!
Yessir
Nice job
Hey did too much.. you don't have to take all the apart..
All that crap just to replace a simple side marker bulb. Geeesh.
what a pain thanks!
THANKS GM!!!
Damn that's a pain in the a$$. Idk why gmc got rid of the old way. 2 pins and done.
Thank you!
Thank you
Thank you 🙏🏻