Now I remember why I moved from PA, to Florida! That salt, and patches of dirty snow😂 Truck looks great! When you first unboxed the wheels, I was like “Red??” Hey, it works!
Awesome video ... wow the truck looks crazy bad ass now those rims are sick with the 35 Nitto’s !!! I did a very similar setup on my 19 Ram sport too ... 4” BDS lift with the Fox shocks as well. Got some sweet 20x10 Fuel Assaults with 33” NITTO Grapplers. I wish I would have went with the 35’s but didn’t think my truck would clear the garage door opening only to find out that it just would have barely!! Next set of Nittos for sure will be 35’s! Next up this spring for my Ram .... Borla S-Type cat back kit and S&B cold air intake kit. Also wanna light it up with some under carriage rock lights and a killer light bar in front !! Love your vids your vehicles are all so awesome !!! 🤟
Are the upper control arm relocation brackets required for the rear with a 4 inch lift? I noticed the bds kit comes with them but the rough country kit don’t for a 2015 ram 1500. Will this cause vibration or any issues if you don’t install the brackets?
Love the wheels.....Perfect color choice, beings how it's Valentines Day....lol....Great job on the lift....Looks wonderful.....Happy Valentines Day to you and the family....
I like your Ram Rebel 1500. I see that your still driving Dodge/Ram Products. I remember your old green Dodge Dakota v6 you drove in early 2000’s or 1999. I definitely like your ride Darien. I just bought a 2019 F-250 Superduty.
First off have to say, your truck came out beautiful. Your taste and mine are slightly different however I still appreciate what your final vision was going for.
I really like the wheels took a bit to grow on me but the more I look at them I more I like them, I just got rid of my "beast" which had a lot of the same mods as yours did and picked up a new body laramie 1500, just threw on a borla attak exhaust and now looking at a BDS air lift 4" suspension along with 20" wheels and some 35s. Hemifever tuning ordered and on the way. This is such a fun truck to drive already and the progress made on these new trucks is phenomenal
@@BEASTProjects What lug nuts did you use with these wheels? The wheels grew on me so much I ordered an all black set for my laramie. I have used gorilla splined lug nuts on my prior HD wheel swaps in black chrome
Also thought about grabbing the pulsar edge, but would love more info on the diablo tune. Your Ram is identical to mine, minus the lift and choice of wheels and tires.
4:59 that tiny rubber stove pipe is your diff breather. Go get you some longer 1/4 tubing from the the auto parts store and relocate it higher. It'll keep water out of the diff just in case the mall parking lot floods and you need to get out. Those wheels are sick, nice grab!
Damn I got excited thinking this was the 4" AirRide BDS lift kit; ZERO videos of the install on the web :l looks pretty similar though aside from the struts and lack of air lines
You could have a least washed the truck for her lol. Im installing 22" fuel contras with red milling this Spring. You need to add skme red accents around the truck to off set all the black. I have red ram logo going on the sport hood and red tow hooks.
Can you tell everyone what the height was before you started and after? Garage clearance. I myself have 5-6 inches clearance.. thank you You did a great job..
New to your channel and heck yeah! Lift done right!!! Killer wheels!! My wife and I are considering a Rebel for our road trip/over landing/family truck. Are you planning on doing a daily driveabilty and off-road review of the lift?
Welcome to the channel! We haven’t taken it off-road too much, but the lift was done right & the truck is more than capable now. The ride is just as good as stock if not better thanks to the engineering done by BDS. Hit up the Jp Shop to order your kit. 610-458-1977. We can get it shipped directly to you or to the shop that you want to use if you’re not local.
BEAST Projects thank you! We have not bought the truck as of yet. No we don’t live in the PA area but we have family there. Looks like your west or northwest of Harrisburg? So is there a front shock and spring upgrade that could be added to this lift?
You can probably go with a 20X10 wheel, but there might be a little tire poke. I wanted to avoid that w/ all the miles we put on the truck. They don't look skinny on this setup, but I probably would of went w/ a wider wheel if I got a 6" lift & went to 37" tires.
Wanted to ask you i have a 2018 ram 1500 big horn what would you advise on a 2.5 affordable leval with 35" tires And would you change the stock control arms for a heavy tire please let me no what you think
Hey guys, I don't know if anyone have any idea why? So I have my 2020 1500 Ram, I have installed a 4" BDS lift kit, and today I got XF rims 20x10 -24 offset wrapped in 35x12.5x20 Toyo AT2 Extreme, but I realized tires are rubbing in the plastic liner wheel well. I've seen guys with just a 2" leveling kit they can fit same tires no problem, but I don't know why mine is rubbing I'm kinda pissed.
There's a lot a variables at play, like the offset, backspacing & tire tread that could be causing the rub. Hopefully it's not too bad & you just need to trim the liner a little bit. It's not unusual for that to happen when your modifying..
Truck turned out sweet! I’m thinking of putting a 4” BDS on my Rebel. Now that you’ve had it for a bit, how does it drive and handle? Anything you’d do differently? I’m on coil suspension as well. Not air.
Did you have to mess with the gear ratios at all after lifting it and adding bigger tires? New to the Ram game, just bought a 2020 Rebel a few weeks ago.
@@BEASTProjects Yes, I just saw that, and the one about the diablo as well. I'd be worried about the warranty though lol. As previously mentioned, I'm running a Borla ATAK exhaust. I'm actually not sure if I have Res delete or not, may have to check on that. But I love it. Just bought some more tires yesterday too, my third set, just cause I like change lol.
Trying to do this for my 2016 rebel but I want to go with the Fuel Beast rims. Would it be the same offset on these and do I need to go with 20x9 or should I go with 20x10?? and is does this need a speedo calibration?
There's a lot of variables at play. I can tell you on 2019+ Ram 1500 Trucks, 20X9" 1+ Offset is perfect. If you go with larger tires, you'll need to calibrate the speedo.
Are you happy with the height of the 4 inch lift? Do you wish you went with 6? It is tough to tell in pictures did it get a good amount bigger with the 4?
They were telling me that there is like a half inch to an inch but I think with our trucks that looks good because almost dead level makes us look nose high..you know
So is the ride really as comparable to stock? The only difference is that you have the Bilsteins on your front suspension on the rebel. My ride should even be more plush with the NON-ORP suspension.
Truck looks killer! Great choice of wheels!!!
Nothing beats a Dodge Ram. 😎
Thanks bro!!
Blood Wrench it’s not a Dodge
BEAST Projects was wondering what exhaust is on the Rebel
Steve Jossa Corsa Exhaust System w/ Res Delete, there’s whole video on it on the Channel.
I just wanted to say thank you for inspiring me to take the chance on my own channel. I do miss your diesel. Thank you
Thanks buddy! I’ll check yours out .
Spider man called he wants his wheels back lol
She looks so much better with the new lift and wheels on 😬👍🏻💪🏻
So much better!! Thank Mike!
That skid plate would look very good in the same red. 😬😬😬. Looking good.
U did it right that for sure! Stance and offset indeed is perfect! Killer job with it
Thanks Johsel!
Truck looks awesome!! Those Fuel wheels are “kickass”!!
It’s a BEAST !!!
Thanks Tony
Now I remember why I moved from PA, to Florida! That salt, and patches of dirty snow😂 Truck looks great! When you first unboxed the wheels, I was like “Red??” Hey, it works!
now all the men and some women are going to be chasing Heather. haha. Great looking truck. My 2500 is getting a lift Monday.
Sorry I’m late. Work🙄.
Truck looks great!!
Awesome video ... wow the truck looks crazy bad ass now those rims are sick with the 35 Nitto’s !!! I did a very similar setup on my 19 Ram sport too ... 4” BDS lift with the Fox shocks as well. Got some sweet 20x10 Fuel Assaults with 33” NITTO Grapplers. I wish I would have went with the 35’s but didn’t think my truck would clear the garage door opening only to find out that it just would have barely!! Next set of Nittos for sure will be 35’s! Next up this spring for my Ram .... Borla S-Type cat back kit and S&B cold air intake kit. Also wanna light it up with some under carriage rock lights and a killer light bar in front !! Love your vids your vehicles are all so awesome !!! 🤟
Thanks Jason!
Looking good. 20s growing on me with the black outer ring. Keeps it looking in scale. Looks like a proper truck now.
They good real good!
That truck is set up perfectly
Are the upper control arm relocation brackets required for the rear with a 4 inch lift? I noticed the bds kit comes with them but the rough country kit don’t for a 2015 ram 1500. Will this cause vibration or any issues if you don’t install the brackets?
Wow!! The wheels are fire!
Thank you 🙏🏻
Looking good Ram Man!!!!
Thanks buddy
It looks perfect up there!
Looking good! Goodluck at the show!
Thanks buddy!
Looks great!
Thanks Troy
Working on my ram 1500 also....
Great work, great looking truck 👍👍
Thank you 🙏🏻
Perfect.... . Flawless victory
Love the wheels.....Perfect color choice, beings how it's Valentines Day....lol....Great job on the lift....Looks wonderful.....Happy Valentines Day to you and the family....
Thanks Mike!! 🙏🏻
Looks awsome
Thanks John
Wow, absolutely perfect 👌
Slim56 Just like the girl who drives it 😜😂🤣 Thank you!
Came out awesome love it
Thanks Angel
Awesome look !!
Thank you, Merry Christmas!
I like your Ram Rebel 1500. I see that your still driving Dodge/Ram Products. I remember your old green Dodge Dakota v6 you drove in early 2000’s or 1999. I definitely like your ride Darien. I just bought a 2019 F-250 Superduty.
That is awesome.
Good eye on the right upgrades that look awesome and perform and Shelby would approve of 👍🏻👍🏻👊🏻💪🏻🇺🇸🇺🇸
First off have to say, your truck came out beautiful. Your taste and mine are slightly different however I still appreciate what your final vision was going for.
Thanks
I really like the wheels took a bit to grow on me but the more I look at them I more I like them, I just got rid of my "beast" which had a lot of the same mods as yours did and picked up a new body laramie 1500, just threw on a borla attak exhaust and now looking at a BDS air lift 4" suspension along with 20" wheels and some 35s. Hemifever tuning ordered and on the way. This is such a fun truck to drive already and the progress made on these new trucks is phenomenal
You’re going to love Hemifever’s tuning!! Such a big difference!
@@BEASTProjects What lug nuts did you use with these wheels? The wheels grew on me so much I ordered an all black set for my laramie. I have used gorilla splined lug nuts on my prior HD wheel swaps in black chrome
Also thought about grabbing the pulsar edge, but would love more info on the diablo tune. Your Ram is identical to mine, minus the lift and choice of wheels and tires.
That red is beautiful.
I like it. Looks good bud.
Thanks Dustin! How’s the BEAST doing?
@@BEASTProjects Doing good! Going to get it cleaned up today at Attention to detail PA.
4:59 that tiny rubber stove pipe is your diff breather. Go get you some longer 1/4 tubing from the the auto parts store and relocate it higher. It'll keep water out of the diff just in case the mall parking lot floods and you need to get out. Those wheels are sick, nice grab!
Thank you 🙏🏻
I seen the truck at the show today in Harrisburg, looks great. Be interesting to see what's in store next for it.
Thanks Shawn
you're welcome
Looks great! But hose decorative bead lock rings trap water and drives me nuts.
Sam Goodman does this create a rust issue?
elpapadebatman Not that I have seen since most wheels are some sort of alloy. Just always water in there which is usually dirty from the road.
Correct, Sir
Sweet looking wheels.
They will look great with some salty beach sand on them :)
Thanks Mike
Need to get Momma some Amp power steps now.
Agreed
Truck looks sick man I love it, what's the offset on those rims??
Thank you, the info is in the video description. Stock off-set, I believe 18+.
Is this now the 1735H kit from BDS? Looking at the same setup for my 2020 Rebel with the D716 Covert wheels! It looks awesome!
Havent really watched much since you sold the OG RamBeast. I miss the diesel content from you...
Damn I got excited thinking this was the 4" AirRide BDS lift kit; ZERO videos of the install on the web :l looks pretty similar though aside from the struts and lack of air lines
Looks great 👍 bud get her side steps anyway great looking truck good choices
Thank you
What is your over all height? Will you clear 7' clearance?
Can that lift kit fit for 37" inch tire? 🤔
Are you able to revert it back to stock with this kit
How much did all of that cost you? Including lador
Going from stock to this 4” lift, did it make that big of a difference in height?
What is the height from the ground to the fender above front wheel?
What did that cost?
You need amp steps now. I would take that light grey skid plate and do it in the red like the rim's. That would be Sweet Looking
CHRISTOPHER LILES I’m avoiding steps like the flu 🙅🏼♀️
@@heathersmith8998 Why is that ? They will fold up until you open the door then drop down. Perfect for You !!!
CHRISTOPHER LILES Don’t need them. I get in and out just fine and the little one doesn’t have an issue either.
What do you mean 93 tune?
You should have put bigger brakes rotors and calipers while you were already there
Maybe one day...
You could have a least washed the truck for her lol. Im installing 22" fuel contras with red milling this Spring.
You need to add skme red accents around the truck to off set all the black. I have red ram logo going on the sport hood and red tow hooks.
I know, I know.... I work FT & vlog whenever I have a chance. It's all cleaned up for the next video.
Take 5 mins to wash before dramatic reveal. Extra kudo points
It took a few hours to get it all cleaned up in the next video...
Should get the emblem in red now
Why did you take the Diablo Trinity off your truck After Bragging it up and act like it was so great, And just replaced it with the pulsar by edge?
I didn’t, I got rid of the Pulsar. Check the video upload dates..
Can you tell everyone what the height was before you started and after?
Garage clearance. I myself have 5-6 inches clearance.. thank you
You did a great job..
Thanks Mike, unfortunately we moved onto a new project & I no longer have this truck.
Did that wheel set up change your load index?
Cool looking truck...you put fox shocks on the back and you left the front stock? When you gonna change that? Nice video thou👍
Not sure
What exhaust did hog install on this truck?
Axle shafts? Where dod you get it?
Did you see horsepower gains with the Corsa exhaust system as well and air intake
Yes, there’s a video in the playlist.
New to your channel and heck yeah! Lift done right!!! Killer wheels!! My wife and I are considering a Rebel for our road trip/over landing/family truck. Are you planning on doing a daily driveabilty and off-road review of the lift?
Welcome to the channel! We haven’t taken it off-road too much, but the lift was done right & the truck is more than capable now. The ride is just as good as stock if not better thanks to the engineering done by BDS. Hit up the Jp Shop to order your kit. 610-458-1977. We can get it shipped directly to you or to the shop that you want to use if you’re not local.
BEAST Projects thank you! We have not bought the truck as of yet. No we don’t live in the PA area but we have family there. Looks like your west or northwest of Harrisburg? So is there a front shock and spring upgrade that could be added to this lift?
Looks great. Couple questions why did you go with the 1 inch offset. Can you go with a wider tire? Almost looks too skinny with a 9.
You can probably go with a 20X10 wheel, but there might be a little tire poke. I wanted to avoid that w/ all the miles we put on the truck. They don't look skinny on this setup, but I probably would of went w/ a wider wheel if I got a 6" lift & went to 37" tires.
Wanted to ask you i have a 2018 ram 1500 big horn what would you advise on a 2.5 affordable leval with 35" tires
And would you change the stock control arms for a heavy tire please let me no what you think
Hit up the Jp Shop, 610-458-1977. I would recommend Zone Off-Road.
How does it ride on the highway? And wobble? Truck looks sick, looking to do something similar on mine.
Rides great, no wobble at all.
Hey guys, I don't know if anyone have any idea why? So I have my 2020 1500 Ram, I have installed a 4" BDS lift kit, and today I got XF rims 20x10 -24 offset wrapped in 35x12.5x20 Toyo AT2 Extreme, but I realized tires are rubbing in the plastic liner wheel well. I've seen guys with just a 2" leveling kit they can fit same tires no problem, but I don't know why mine is rubbing I'm kinda pissed.
There's a lot a variables at play, like the offset, backspacing & tire tread that could be causing the rub. Hopefully it's not too bad & you just need to trim the liner a little bit. It's not unusual for that to happen when your modifying..
Truck turned out sweet! I’m thinking of putting a 4” BDS on my Rebel.
Now that you’ve had it for a bit, how does it drive and handle?
Anything you’d do differently?
I’m on coil suspension as well. Not air.
It’ drives great!
Did you have to mess with the gear ratios at all after lifting it and adding bigger tires? New to the Ram game, just bought a 2020 Rebel a few weeks ago.
I didn't the Rebel has a 3.92 gear ratio, which is the max you can go because of the IFS.
Why not put the FOX Shocks on the front as well?
Kit didn’t come with new front struts.
What is the front and rear fender height now that the suspension has settled?
It did settle a little as time went on.
First hey everyone 👋🏻
Does the lift void any of the warranty and what about the tune?
Yea, suspension components & most likely on the tuning as well.
How much do those wheels rub? I'm debating between 0 or -12 offset
No rub at all.
Would you say this kit performs well offroad?
This kit, 100%!! BDS’s kit maintains the suspension geometry, so you don’t break stuff during articulation.
Did you have the air suspension? I know my lift is gona be pricey in order to keep the air suspension.But your Rebel is gorgeous!!
Ours is on coil springs. Thank you!
Does the front sit a little higher then the back or??
It’s settled a bit, since this video was made.
Looking good! Did the outside lip of the rims get marked from the tire machine? Looked like the paint was scuffed on the lip.
No, it was soap.
@@BEASTProjects Good to hear! I have seen shops gouge the rim lip on a new rim. Job well done!
It’s very nice how much cost you everything my friend?
Hit up the Jp Shop, 610-458-1977 for a quote.
How would you say 35s vs the stock 33s affect mpg on the rebel with 3.92s?
Not much difference at all.
Alfa obd will do the tpms system supper awesome app can do tone of stuff as well
I’m going to have to check that out. Thanks
A few videos on TH-cam show how it works it’s awesome app for the ram trucks that’s what I did for my 18 2500
What's your exhaust system? And why not a 6" lift? My 2019 Rebel has a Borla ATAK exhaust with a 2" leveling kit. I'm wanting a 6" BDS though.
Corsa Performance... There’s a couple videos on the Channel about it.
@@BEASTProjects Yes, I just saw that, and the one about the diablo as well. I'd be worried about the warranty though lol. As previously mentioned, I'm running a Borla ATAK exhaust. I'm actually not sure if I have Res delete or not, may have to check on that. But I love it. Just bought some more tires yesterday too, my third set, just cause I like change lol.
Trying to do this for my 2016 rebel but I want to go with the Fuel Beast rims. Would it be the same offset on these and do I need to go with 20x9 or should I go with 20x10?? and is does this need a speedo calibration?
There's a lot of variables at play. I can tell you on 2019+ Ram 1500 Trucks, 20X9" 1+ Offset is perfect. If you go with larger tires, you'll need to calibrate the speedo.
@@BEASTProjects ty for responding. I have the 2016 rebel with air ride. I think it is the same.
Are you happy with the height of the 4 inch lift? Do you wish you went with 6? It is tough to tell in pictures did it get a good amount bigger with the 4?
Yup, we were really happy w/ it. Didn’t want to go 37” tires w/ that big. Looks perfect w/ 4” lift & 35’s.
Is it still pretty big just not over the top huge?
Yup
Avez vous installer entretoise spacer dans le ressort ou pas
All kits are different. Some are preloaded and others mount the spacer on top of the strut.
My BDS is going on Friday so stoked 🤙🏻 now you just need some Amp Powersteps ..how much rake do you have?
None, almost 100% leveled.
They were telling me that there is like a half inch to an inch but I think with our trucks that looks good because almost dead level makes us look nose high..you know
So is the ride really as comparable to stock? The only difference is that you have the Bilsteins on your front suspension on the rebel. My ride should even be more plush with the NON-ORP suspension.
There wasn’t a preload spacer.
It rides nice.... much better than the 2500 after lifting it.
What exhaust is that? it sounds great!
Corsa
Is that like the ram Rebel trx?
If I Hellcat swap it!
How much did the build cost?
Hit the Jp Shop up for a quote, 610-458-1977.
You are a lucky man to have a wife that loves it as much as you
She’s a keeper!!
Truck looks great! But at least should have run it through a car wash unless maybe it wouldn’t fit.
Had no time, working FT and vlogging when I time. I knew I was going to get crap for that. hahaha
Curious why you wouldn’t of washed it either before or after before showing wife
Is she a V8 though ?
Yup
6” lift.
Bitchen wheels bro! Time to blood red vinyl the front RAM logo, tow hooks and hood insignia! 👍
Thank you 🙏🏻
Should’ve got wider wheels 🤷🏽♂️
Didn't want to go down that road again & damage the side of my truck.
Give the rims couple of months.paint will start to come off.fuel are junk