BMW E30 M40B16 Engine Restoration - Rebuild Time-Lapse | Part 2
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Go to getroman.com/RESTORE for $15 dollars off your first order of ED
treatment.
In this episode, I make a start on the parts from the M40B16 engine. Because the engine was deprived of oil due to leaks and the pick-up pipe being plugged, the entire engine is covered in oil that's been burnt on whilst the engine was running too hot. The machine shop episode is coming soon so we'll see if there's any real damage to deal with.
Thanks for watching. Subscribe for more!
#restoration #BMWE30 #engine
00:00 - Intro
00:57 - Cleaning
01:36 - Blasting
01:42 - getroman.com/RESTORE
02:37 - Blasting
04:59 - More cleaning
05:26 - Removing old sump gaskets
07:06 - Blasting continued
09:07 - Removing snapped or stuck bolts
10:06 - Masking
11:36 - Metal filling coolant pipes
11:58 - Final wipe down
12:14 - Etch primer
12:46 - High build primer - Quartz High build
13:35 - Flattening some of the bigger surfaces
13:56 - Basecoat - Saab Dessert Silver
14:57 - Basecoat - Quartz Deep Black
15:53 - Clear Coat - Quartz Crystal Clear
16:49 - Baking each part at 60c for 20 minutes
16:55 - Cleaning up some delicate parts
17:24 - Removing the masking tape
18:17 - Polishing some of the metal mating surfaces
18:46 - Cleaning and polishing smaller bits in prep for zinc plating
18:39 - Before and after plus final shots
Tools & equipment used:
Quartz Lacquer - goo.gl/8PTVKM
Base Coat Paint - goo.gl/mWhufG
Rust Remover - goo.gl/13gopW
Rohr 250 Welder - bit.ly/33mkOGP
Workbenches - arborgardensolutions.co.uk
Moldex Full Face Mask - goo.gl/NNYGrv
FGL 5 Spray gun - goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - goo.gl/cHTJS2
Colad Washable Overalls - goo.gl/3Css9E
Colad Mixing Cups - goo.gl/8DYmE8
Colad TurboMix Sticks - goo.gl/cYZfks
Colad Synthetic Paint Strainers - goo.gl/H79ZgL
Follow me on Social media to keep up to date with videos and behind the scenes.
My Patreon Page:
/ restoreit
My Twitter Page:
/ restore__it
My Facebook Page:
/ restoreitchannel
My Instagram Page:
@RestoreItChannel
PayPal Donations:
Restoreitchannel@gmail.com
Discord
/ discord - ยานยนต์และพาหนะ
I'm a car painter at a bmw dealer, and this made me very, very happy! Excellent job on the paintwork!
Small tip, spray your visor with clear laquer, when it fully cures and gets overspray on it, you can just clean it with thinner, like you could on any laquered surface. Worked for me for years, and didn't need to buy the replacement protectors
and to keep the inside of your mask from fogging get clear dish soap. Rub a thin layer on let harden a bit and buff off....
The attention to detail is incredible! I guess that’s why the channel is called “Restore It” and not “Replace It”
M539 Restorations and Restore It videos in the same day? Count me in!
Just watched them one after another.. The only channels i am truly hyped to watch when a new video drops, haha!
same
Pretty sure Sreten is watching Restore It too
They should team up lol
I don't think The Evil Twin and Hans would like it xD
That blasting looks really therapeutic
Maybe one tip for you: Parts like the oil sump or anything related to oil shouldn't be sandblasted as you never get the particles washed away afterwards. And if these particles find their way into for example the main bearings, that would be BAD. BUT you can soda-blast them and afterward just wash the soda away with water :)
I just woke up, about to boot up my PC, andgrab a coffee.
Check TH-cam real quick and see a new vid from Restore It.
Today is gonna be a GOOD day
You're absolutely killing it man. I can tell how much more effort was put into the documentation of this video! It's not easy to film such repetitive work like this so thoroughly. Keep it coming dude, OG subscriber since day 1!!
now came the new age of dry ice pasting, I asw it in action very amazing technology 👍❄️
Seeing the sand blast the crud off the parts never gets old.
10:15 did you blast the front block cover with the oil pump assembled? If so the grit trapped in the pump will destroy your engine if you don't clean it out.
Was just going through the comments to see if anyone else had pointed this out before commenting it myself
Once again, an amazing job 👍 and a remarkable transformation 🤩. I am looking forward to watching the next episodes.
Loved the episode! Especially the way you narrated and explained the process in a bit more detail!
Love watching your videos. Great work and you have so much patience.
Great one as usual, very informative and inspiring as well ! It's always nice to see the path your channel has run you towards from England, to Spain to England once more. Cheers from Belgium and keep the content coming !
Watching those parts getting sand blasted was really satisfying! Keep up the good work! 👍
I love watching this. :D Nice work!
Twenty mins of pure engine pleasure! 😊👍
love the results,perfect work as usual 👍🏻
Allways a treat watching engine builds and rust repairs from your channel mate! Keep up the good work. Cheers from Denmark.
I absolutely love your videos, thank you!
Just beautiful. Your painstaking and meticulous work really pays benefits. The laying out of the parts on shelving is such a good idea, very methodical. 👍😊
Top quality job/video/everything! Thank you! I want you to know we appreciate your time and effort!!
I really enjoy all the videos that you post, really cool and skillful thing. I appreciate that. Cheers man 👍 💯
Waiting for the next episode. Perfect job, greetings from Brazil.
Great work mate.
wow you did a great job with the masking !!
Great video... Really enjoyed!!!!
Thansk for providing this episode ;)
Great stuff! I love this style of presentation. It reminds me of your older videos.
I'm always amazed that you remember how it all goes back together. Nice work
Little trick I learned when dealing with burnt on or just generally with dirt mixed oily residue is to use heat! A little Propane torch and a screwdriver will get you a long way without blasting so much dust around your shop!
Awesome work mate. Keep it up
Great video mate 👍
It's pleasant to watch and follow for many reasons. Because I'm interested about your work, because I want to relax, because I want to learn. Thank you very much, as usual.
no one is cooler restoring cars. You are the best...
Very nice!
Ah, so satisfying!
Wow next very good work love it wait on next part 👍😍❤️👍
Nice video 👍
6:31 I thought you were going to light it on fire to burn off the oil! bahaha 😂
Maravilloso!!!
Gracias por hacer videos así y felicidades por un trabajo tan espectacular.
Nice job budd!!😎♥🤙👌❤👍 keep up the great work looking good.
Really nice, thorough work. I also appreciate the fact that the chap is wearing PPE. The Chinese fellas would have done it without any PPE, in shorts and flip-flops 😮
TIP: instead of paying silly money for the quartz silicone remover... Just get 5L of clear methylated spirits and mix its 1:1 with water..
This is essentially Prepsol (panel solvent based cleaner), used before spraying... :)
Ive used it for many years.. Never get silicone fish eyes in my paint work
It's amazing 💖
Your living my dream ma boi
Such satisfaction to watch your videos mate... everything is getting a new life and looks better than from the factory! I am working on an old Range Rover classic from 84 that would definitely need your level of patience 😀 Great work!!
Love it man
Travajo perfecto,como siempre 👌🏻👌🏻👌🏻
Really cool!!!
You summed up your channel yourself this episode: "probably overkill, but i couldnt help myself."
great work, as always!
Perfect!
I really like your painting
Awesome :)
the intro reminds me of My summer car :D
Brilliant 👏 anything large sticking out ov the parts washer place a cloth over the top it .it does the job 🙂
Great job! You know I’ve seen some folks get a wonderful finish on aluminum with vapor blast/honing cabinets. Might be something worth looking into with your restorations. Seen a few easy DIY conversions, most of the parts you probably already have since u blast anyway. Just a thought 👍
Goood luck I'm waiting for more videos 🔥🔥🔥🔥
That media blaster was pretty impressive, can't even imagine the speed at which the CO2 blaster is gonna rip through cleaning.
I would go with restore it on the Clark portable blaster. I've had mine for 4 years and still working great, superb bit of kit, worth buying...
That's impressive, you could eat off that engine! Nice work as always
Note: Removing sludge and baked on oil from engine parts, oven cleaner does a good job. Works on dirty Aloy wheels too to remove years of brake dust.
Nice...👍.
It's interesting to watch this with all the dry ice blasting videos now doing the rounds. I forgot this manual, painstaking method of cleaning gunky engines is what most of us have to rely on.
I admire Your patience and precision doing all those projects, keep up! One thing that worries me - AFAIK, You shouldn't blast sealing surfaces... Correct me if I'm wrong.
I wish I would be able to see a video of yours, completing one single car project.
I hope you don`t mind me having a beer while you working.a Big like from me......
Nice
Thanks!
Cool
Please don't forget to disassemble the oil pump and check valve it is inside the control housing (lower timing cover) it will be full of blasting media and will most likely need replacement anyway.
Was going to mention that, its a must.
In my M42 the pump has some bad scarring inside
I can't remember which, but there is another TH-cam restoration channel that media blasted their sump, and the grit (even after washing) destroyed the bearings in days.
Hi everyone!
I see your each videos, they are very good, I like your work stile and I'm very interesting the bmw e30 m42 b18 engine, please make some videos about thise pretty engine!
Thanks.
Always excited to see a new video from Restore It! So satisfying and inspiring for my own restoration (72 Datsun 240Z).
Quick question : what are you using on your dremel to clean parts? I often use steel brushes, but mine have a couple minutes life expectancy...so frustrating! What ends/brands would you recommend?
Impresionante,q perfección,me encantaría q lo hicierais en mi coche
Yeah another great video man how did you fair out on the hiring front
My M30 needs rebuilding. Now I want to do it myself
More Video please💪🏻💪🏻
YAAAAAAAAAAAAAAAAAAA BMW
😂🚗
Look into cerakote as an alternative paint option - could save you lots of time, its a ceramic coating and its hard as nails.
It's time to buy an ultrasonic bath ))
Have you considered getting a dry ice machine instead of the grit / glass blasting, seems far less messy.
Could u do the video @ normal speed, its hard to learn going that fast. Love rhis series.
Remove and clean Oil pump.. Please..
You should get yourself a dry ice blaster
Finally
I would prefer not to use the blaster in the gasket area when it comes to the oil sump just to avoid ruining the surface. However, I am a fan! Keep up the good work!
Find yourself a decent vapour blaster guy, brings ally up like new
Back to the bread and butter work.
What grit did you use in the blaster?
Have you tried using dry ice cleaning? Might save a lot of time.
Very nice video. Is the paint heat resistant or normal paint? Given the fact that many of these pieces are engine parts , do you think the engine temperature will affect in any way the painting that you’ve done? I look forward to do many things like you do myself and any advice will be much appreciated. Ty
thansk for watching! :D
Do you have any tips for replacing a IAC valve ? I recently replaced the idle air control valve on my 1995 Mitsubishi Eclipse GS , but now it tends to idle at 2k rpm, when I step on the accelerator and let go, it doesn’t slow down or drop rpm, it stays the same and drives like an automatic car at times , it’s a stick shift
So is painting the engine metal the best way to protect it? Looks phenomenal by the way. Just wondering what has the best protection. Like powder coating, anodizing, electroplating, etc.
Hello! I see the headset on your head everytime, I have a question, you listening to radio or do you have a playlist? If you have a playlist can you share with us? I'm a mechanic and I'm bored of the radios. ✌️✌️
Hola para cuando el armado del motor m40 😎😉
question : How was the new paintbooth? and comment: Still haven't got around to fix that bench grinder in place!
Залип на покраске:)
Тоже самое))))
👍👍
Have you ever considered vapor blasting for some of these aluminum parts?
Please never ever blast a gasked surface like on the oil pan, that's a predestined leakage source
Small question, do you have to clean the sand in the sand blaster ? And how frequently ?