Great timing! I'm sure it was fun watching your new purchase in action. Hopefully we can beet the 5/17 estimated date for where the current preorders are showing. We'll do our best!
We are looking for a compressor to use at the warehouse. Been looking at this one, hopefully it will fit the bill. But, we still have others in mind. I will have to give you a ring to see how it has been for you all. Joe
So far so great. We had a $3k Nardi compressor beforehand and this is much quieter, and though not as powerful, not that far behind it either (meaning the fills are still very quick considering it's almost a 1/3rd of the cost!)
Does this compressor do a good job with removing the moisture or does it need another filter on the high pressure side. Basically is this compressor alone enough and safe to use right out of the box without worrying about moisture.
I'm having trouble with the safety valve. It keeps leaking air, an the pressure isn't building up. I have it set to 300bar, an it just won't fill my tank. What the heck is going on? Please. Please. Help me.
Is the motor 110 and 220 volt or only 110v. Can you switch the field and power wires to change the voltage of the motor? It costs around 1/3 less to use 220 volts.
the instructions say to run it for 10 minutes with no cap and periodically open the valve to let any water/oil escape and then let it cool down before using it again
How come you guys don't do a review on the hatsan lighting compressor? I see it's out of stock on airgun Depot. When will it be back in stock? Been waiting months for the hatsan model and still say out of stock.
Haha, doubter. I get it. We'll see about posting on our Instagram and Facebook a clip of it hitting 4,500. Though we're starting to get our first reviews coming in on the first wave of customers to get there compressor. Trust me they would be yelling if they didn't get a 4,500 fill: www.airgundepot.com/air-venturi-air-compressor-electric-4500-psi-300-bar.html
Have had mine for 2-3 years. Used maybe 15 times to recharge my bobcat mk2. It leaked out a bunch of oil last weekend when I used it. Anyone run into that? Compressor oil is still full....would guess it leaked out 1/8 to 1/4 cup....don't see any obvious leaks. Drain plug was a little loose....but don't think that was it. Gonna run it and see if I can spot the leak....
Yes, I had the same issue. I thought that it leaked from the crank case (for which you can buy a brand new gasket) but even after replacing it, I still have oil under the compressor...have you figured out where it was leaking from in your case?
Airgun Depot Yes of course. So in the meantime I bough a yong heng compressor that has worked flawlessly and came, or arrived very nicely packed, not dropped from 30,000 feet like the air venturi I initially received.
This video comes out barely 3 hours after I placed the order for it. I got to wait a while but I know it will definitely worth it. Thanks guys.
Great timing! I'm sure it was fun watching your new purchase in action. Hopefully we can beet the 5/17 estimated date for where the current preorders are showing. We'll do our best!
I know you guys will
We are looking for a compressor to use at the warehouse. Been looking at this one, hopefully it will fit the bill. But, we still have others in mind. I will have to give you a ring to see how it has been for you all.
Joe
So far so great. We had a $3k Nardi compressor beforehand and this is much quieter, and though not as powerful, not that far behind it either (meaning the fills are still very quick considering it's almost a 1/3rd of the cost!)
I'll be watching it closely. Thanks!
Outstanding great job excellent compressor!
really nice review i just ordered one
Can we clean the air filter or is it a one time use only? And it yes is there a special solvent to use?
Thank you for the demo!
Does this compressor do a good job with removing the moisture or does it need another filter on the high pressure side. Basically is this compressor alone enough and safe to use right out of the box without worrying about moisture.
I'm having trouble with the safety valve. It keeps leaking air, an the pressure isn't building up. I have it set to 300bar, an it just won't fill my tank. What the heck is going on?
Please. Please. Help me.
Can you put in glycol instead of water? There's a risk of it freezing and blowing up the plumbing where I live.
Does anyone have a link to an Air Venturi Overhaul video? How many hours are people getting out of these things before needing an overhaul?
Is the motor 110 and 220 volt or only 110v. Can you switch the field and power wires to change the voltage of the motor?
It costs around 1/3 less to use 220 volts.
Would it be advantageous to use ethylene glycol instead of straight water for cooling?
No. You want to keep above freezing.
Beat me to it. Haha. I'd probably use coolant in it anyways.
No desiccant filter on the discharge of the compressor?
I think he forgot the part about running it to break it in
the instructions say to run it for 10 minutes with no cap and periodically open the valve to let any water/oil escape and then let it cool down before using it again
How come you guys don't do a review on the hatsan lighting compressor? I see it's out of stock on airgun Depot. When will it be back in stock? Been waiting months for the hatsan model and still say out of stock.
We are planning on getting more in soon. A review of it would be a good idea, thanks!
How much oil does it hold?
What is the price. And is it 110 volts plug in.
You guys didn't show out,if it's really went up to the 4000psi. I would like to see that.!?!?
Haha, doubter. I get it. We'll see about posting on our Instagram and Facebook a clip of it hitting 4,500. Though we're starting to get our first reviews coming in on the first wave of customers to get there compressor. Trust me they would be yelling if they didn't get a 4,500 fill: www.airgundepot.com/air-venturi-air-compressor-electric-4500-psi-300-bar.html
Have had mine for 2-3 years. Used maybe 15 times to recharge my bobcat mk2. It leaked out a bunch of oil last weekend when I used it. Anyone run into that? Compressor oil is still full....would guess it leaked out 1/8 to 1/4 cup....don't see any obvious leaks. Drain plug was a little loose....but don't think that was it. Gonna run it and see if I can spot the leak....
Yes, I had the same issue. I thought that it leaked from the crank case (for which you can buy a brand new gasket) but even after replacing it, I still have oil under the compressor...have you figured out where it was leaking from in your case?
Took almost 5 months to get mine and it broke internally in under 10 hours of useage. Now I am on the bank log again waiting for another one.
Do you have an order #?
Airgun Depot Yes of course. So in the meantime I bough a yong heng compressor that has worked flawlessly and came, or arrived very nicely packed, not dropped from 30,000 feet like the air venturi I initially received.
What is it?
Airgun Depot this is the resent compressor to replace the air dropped one. Order #: 7168185
It should have been delivered this Monday. If you have any issues please contact us at orders@airgundepot.com
What's the price of that boy compressor
$1,299.99 www.airgundepot.com/air-venturi-air-compressor-electric-4500-psi-300-bar.html
Phillip Mendiola 1500 now.
@@airgundepot why did the price go up
oh man I wish I had that I got a benjamin pump instead lol
What kind of oil should be used?
Yale Zhang 5w 30
I know very late to reply but I seen in another video as looking into this beauty
Air Venturi now sells factory oil for these in a bottle that is the exact amount to fill it from empty
Damn thing sounds like it's a generator it's giving me a headache just listening to from the video