DIY Lithium DRILL Battery
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Hi, everyone! Today I'm gonna show you how I converted (replaced) my old Ni-Cd drill to li-ion using 18650.
I used:
1) High-Amps (30A) Lithium batteries 18650, capacity 3000mAh:
s.click.aliexpr...
2) BMS Protection Board For Li-ion (12,6V/3S 20A):
s.click.aliexpr...
3) 12,6V Lithium battery charger (adapter):
s.click.aliexpr...
4) Battery level indicator:
s.click.aliexpr...
5) Small push switch:
s.click.aliexpr...
6) I also use the soldering flux for steel:
s.click.aliexp...
That's all!
Please, subscribe!
#Lithium
#Drill
#Battery
Самый простой и лучший лайфхак по переделке, никаких лишних головокружений и рассуждений как на уроке физики, всё доступно и четко описано откуда купить и куда припаять, всё, блин ну как приятно смотреть подобные видео, сегодня (12,feb,2020) я уже переделал свой шурповерт, доволен как слон. Подпись и лайк одназначно... Теперь ждем новое видео, как сделать в авто 220 В (1000 Ватт) чтоб можно было в горах эл. чайник подключить без ущерба электрике, Спасибоооо АФТОРУ, побольше подписок и лайков.
AWESOME VIDEO. I didn't need to set it to fast play or skip self indulgent explanations. Thanks !!!
Great video. Especially the beginning of this tutorial Diy project, but I never could get the items directly from the screen it self. Amazing.
You have to click add to cart and checkout. Otherwise it doesn’t get unlocked to pull off the screen.
Excellent special effects. Love you work.
Nice. I wish more videos would take this route. shows you what you need to know.
I've done this on my drill a few months ago and I'm very happy, because not only the drill has more capacity, also when I need to use it, it have battery. With the old Ni-CD batteries always was discharged when I need it, but for now it still above 12v with LiION. Also the old Ni-CD batteries were at 60-70% of capacity without too much use, so the memory effect in original batteries is very high while on LiION doesn't exists.
The best for me was the price, because I've used recycled batteries from my laptop (supposedly dead, but with about 2mAh), and also I've bougth the battery protection time ago, so new batteries for about 2€.
Помог жене в ремонте. Настоящий мужик !!!
Ха-ха, точно)))
Great video, you make it look so easy. If I could actually do that taking 10 times the time it took you I'd be very happy with myself. I've learned that there is a big difference in knowing how something is done as apposed to someone having having the skills to do it. Since I have so many of these just lying around I may just give it try and if it doesn't work for me I can just throw them away. Thanks for sharing your good ideas.
Super creative, with new LiIon battery set, cordless drill are lot less in weight too...
Que bueno!!! Así da gusto comprar en Aluexpress!!! Ja ja ja!!! Gracias Amigo, saludos desde España!!!
Trust me when I tell you that those BMS is, in fact one portrayed in particular, does not work well on a heavy duty tool with a high amperage draw. I would recommend using them for smaller non-heavy duty tools. I’ve blown up multiple boards and triggers trying to make a battery pack for my 14.4 V XRP DeWalt
Buy bms dat can handle higher amp
Nice video! I like the quality of the battery terminal soldering especially. Nice touch that other videos don't do. The badass lady at the end doing stucco mixing is a good demonstration!
Except that you're not supposed to solder them at all, ever, and getting it nice and hot to make a good solder joint, is the majority of the problem.
Buen trabajo y modificacion utiliso baterias de litio de alto drenaje y el circuto bms para baterias litio.
Pdt: nunca utilisen las baterias de laptop o computadoras ya que no son aptas para alta descarga de amperios pueden explotar.
Никогда, я повторяю, никогда не держитесь рукой в рукавицах и перчатках за венчик миксера. Если будут большие обороты и кнопка защелкнется на фиксатор, то вы поломаете пальцы, когда намотает рукавицу.
Man you made that look easy 👌🏼 wish me luck kind regards from uk 🇬🇧
and it is easy... nothing easier than this.. if you, of course, know how to solder
@@xgamerbih the only thing that really bothers me when working on electronics especially with pcb or circuits is that I worry about getting all the voltages right so as not to blow anything. Even worse I would hate to create a combustible problem aka fire.
Any tips for getting those things right and also for learning about them?
Красавчик!Зачётно!И жена хорошая,это заметно по милому лицу.
Thanks for the video, but it is very fast and I could not notice how the batteries were connected, as well as how to install the protection circuit and modification on the charging base
Please write the method in the video description box
Nice job!
i've made a half dozen of these using used 18650's from laptop power supplies, but no special charger or card for them. whenever i ruin a cell, i just toss it and solder in another. i've also done it with flashlights, and an old cordless dremel-like tool. i charge using a buck converter with an old printer power supply, or laptop power supply. i just have to monitor the current and heat.
No. what i'm doing is playing with a big pile of parts i got for free, and don't want to spend any money on. free batteries and free drills. i seem to only ruin about 1 "FREE" 18650 cell a year. i'm not saying his work isn't nice. it is. i'm "un"-wasting batteries that i got other people to give me instead of throwing them away. laptop battery packs they were going to throw away.
That’s pretty cool! I did a similar battery setup with a 6s lipo and man I had to be careful otherwise it would twist my wrist off:)!!
good job!! Can you make an 18 volts battery?
Yes.. same method but use 5 cells with the correct BMS. I'm going the same to my 18v ni-cd in a couple weeks as both batteries are in the way out. And using a smart lithium charger just makes life simple. £22 worth of 3000mAh cells and £9 smart charger breathes new life into old tools!!
Good content on your video of how fix a battery drill. Hello here from Puerto Rico
Gracias!
Excellent vid, thanks for sharing, especially the links.
я переделывал такой же шуруповерт, в его корпус акумулятора помещается 6шт. 18650 с таким же bms
не , чел , я так быстро переделать не смогу 😁
пЫ.сЫ, ахиренно ты жену приспособил , сразу видно " женщина - лучший друг человека" 😆
Wow Nice magic trick on your computer
Excellent! Thank you for sharing.
I've tried to catch the items out of the screen, as you did, but i don't why : it doesn't work with me...
Finally someone who took care to solder in the middle of the 18650 cells, isolate the terminals and etc. Could have secured the main wires better, and put some electric tape over the BMS. But man this was by far the "least" cringe inducing conversion video so far.
Super Bro Thank sharing
You get a like for that intro alone
Great job, would be even better if you'd put a fuse in the battery pack.
Current limiting should already, necessarily be handled by the protection circuit for the pack.
Very nice
Sensacional trabalho! 1000 likes 😁👍🏽
Me desanimó no saber donde hizo el puente en el chip ( ya me fijé y no es ahí es en la placa de la base donde se pone la pila pa recargarla.( creo que se brinca con el puente: algún diodo y o resistencia)del cargador, y arriesgarse sin saber bastante, es peligroso.
Классное видео
👍
Buen proyecto!!!
nice Work !
Genial Idea, me gusto. 👍🙄
Bravo bel lavoro
excellent
You are a super person, congratulations.
good job~
Good job
Bravo Bravo Fantástico. Congratulation. São Paulo, Brasil.
Use soldadura con resina y punto.
I want to shop like you shop!
Nice job
Siparis falan vermiyoruz direk ekrandan alıyoruz güzel olmuş emeğinize sağlık
Was it possible to add there 3s2p li-ion pack? It will have 2 times more current (means 2 times lower resistance, also higher voltage during work) and 2 times higher capacity -->means longer work.
Yes, of course
Very good.
Hello. Nice video. I have a 14.4V drill. Can I use the same setup like you did? Or do i need 4 cells? Thanks for help
Thanks!
Usually use 4 cells, as far as I know
Perfeito !!!
very gooood
Great work 👏🏻
Thank you!
(wery netly your warking sooper am wery happy to waching this video
NO 1. job👍👍
So, did you attach that drill to the tuning knob on a radio to get your background noise?
Nice play 👏👏👏👏👏👏
Cool. How do you check balance? You should of snagged a dremel from webpage.
Для таких строительных работ. Было бы лучше прилепить радиатор на диоды силовые. Да и вместо зарядки, лучше купить плату заряда, где можно регулировать ток и напряжение (будет дешевле и надежнее, используя родную зарядка шуруповерта)
А так принципе очень классно сделано.
Ну ну ну.. на бмс нет как Вы выразились силовых диодов! Транзисторы, согласен, но и они не особо нуждаются в дополнительном охлаждении, так как рассчитаны на определенные нагрузки (читайте даташит)
Ведь плата рассчитывается на определенные токи, которые с небольшим запасом выдерживают эти транзисторы. Если Вы всё же маньяк и пытаетесь снять с бмс больше 30-40 Ампер то у Вас те же высокотоковые аккумуляторы просто начнут просаживать общую напругу и сработает защита! А ещё на бмс есть выход для подключения термоэлемента, который есть в каждом даже кадмиевом аккуме. Вот его используйте для защиты от перегрева..
@@111tier полностью согласен с вами.Вот вопрос,у меня такая же Макита,но родной аккумулятор на 14.4 вольта и 1.3 Ah.Мне тоже самое подойдёт или бмс нужна на 4S?
@@Oleg-Frol , можете смело использовать БМС на 4s и зарядное Вам нужно на 16.8 В
@@Oleg-Frol и кстати, используйте высокотоковые аккумуляторы ёмкостью не менее 2000 мАч и будет вам счастье!
@@111tier большое вам спасибо!🙂
Самая достойная переделка .
Great video, how come you can get that particular BMS to work with the drill. I tried several, they just shutdown with high amperage drill motors??
Obrigado
Хорошие эффекты
Good intro ;)
Hi, thank you for this video it helped me a lot, a little question, Why did you modify the original charging board?
Hi! Because the old charger was specially for Ni-Cd batteryes, and new charger is specially for Li-ion. There are different ways of charging control
@@hiimakeit tks!!
this pcb does for everything???
3:00 cold solder point spotted ;)
Wow
Xịn xò đó
Can you tell me where did you buy control board of batteries???
done!
All kind of 18650 Lithium batteries can be used for this? Or do I need a specific type of battery?
Thanks.
Better if they are low resistance batteries (high current), because the drain of the drill. Anyway, I've used batteries recycled from a laptop and they works, but I've used 6 cells (2 blocks of 3 cells), so they supports more current. The BMS circuit is also important, because some of them can threat the drill as a short-circuit and don't works. It should be compatible with drills.
У меня дома такой же шурик переделанный и такой же набор отверток.
how did you edited first part.that you taking things from monitor
It's magic
Great :)
Great video. Where can you buy such a monitor where is "everything"? :-)
Everything is listed in the description. I'm sure you can find the same items elsewhere too.
What is the use of making that change? I do not understand what it would help me.
the old batteries (ni-cd) don't hold a charge long. the new ones (li-ion) have very low self discharge
Ха, прямо фокусник ))
Im upto build a battery pack for my cordless drill.(drill has rs775 motor)
Stock battery was 12v 1.5ah.
Can i replace that with 3s2p pack with 10A BMS ??
How to choose the amps rating of bms ???
Alguien sabe que líquido elemento le aplica a los contactos de las baterías para que se adiera mejor el estaño...
Flux para soldar
Nice. How's the Aliexpress batteries running since your build?
Wery vell. I use the drill every week when I'm doing repair in my home. I peeling walls from old plaster, using circular wire brush. Also screwing. and mix plaster, glue and pain. It still works with long battery lifetime. I've read many about china's li-ion batteryes before this project. Liitokala is realy good. I use their cells in my power banks. recommend
@@hiimakeit. Thank you for your prompt reply. I will try this Brand of 18650 on your recommendations. Keep up the good work.
Лайк за улыбку
Top
بارع يا رائع
Ok!
Very Good😚😙
Perfect video, where could I buy the electronic board and batteries? thank you
Thanks! All links in description
@@hiimakeit you're right, I hadn't noticed. Thank you
Ik thought about this to for my 12 Nic packs, but 3 cells are aprox 11 volts and 4 cells are aprox 15 v.
Easily fixed with a 12v high output voltage regulator
@@dracomenda2
That's possible but it will drain the battery while the circuit uses operation power.
Also the drill uses up to 30 amps of power.
So the board with heathsink will be big.
There's not enough room in the drill itself.
Maybe I'will use 4 cells and some high power diodes in series.
@@crtbeeldbuis you could also go old school and just add a fixed resistor, but as the voltage drops you'll hit the cutoff much sooner.
@@dracomenda2
Thanks for your ideas. I'will experiment with the different options.
I'll be trying out the same thing here once the cheap batteries for my impact give out. Let me know what you get figured out 😁
Todos deberian expicar las cosas asi ( con imagenes)
www.instructables.com/id/Lithium-DRILL-Battery-18650/
What did you remove from the charger, usually my charger voltage is 25 v but the battery voltage is 14 volts only. In nicd battery, what to do to Bring the charger voltage to required voltage
Hi. I removed all components, because the new adapter has a charge controller specially for 3 li-ion batteries inside. It doesn't have to use other components from the NiCd charge station.
would you like to show more detailed how you converted the charger to 12.6 volt ?? more accurately, that scheme you made on the charger board.
I bought the new one especially for 3 cells 18650. So, I removed all the components from the old charger. There are only two wires: from + to +, and from - to -.
@@hiimakeit
I saw that put a BMS card to do the control. but I noticed that he took the cycles off the charger board and made a direct call. this part that I couldn't understand. to do in mine. Could you send me a picture of my board to help me which circuits to take and where should I make the direct call you made?
@@wandersonvicosa5131 ok, show me your charger board: chgv2005@mail.ru
@@hiimakeit
thanks friend, I managed to solve .. thanks for the attention .. your video is great.
Wouldnt 4 cells better approximate 14.4v
Yes absolutely! But aside from that it's well done.
What is it like under load? I tried this with a different bms and it stalls when hitting a high load eg a tight screw. I'm guessing the higher amp rating bms the better for this?
Thanks.
I wonder what that piece of electronics does,and,can I skip using it?
The green chip that went on the battery? That's a BMS chipboard, it protects the battery from overcharge or over-discharge at the same time act as a battery balancer for 3 cells (3S).
@@Slodin Thank you,I really needed this information.
No it's important
Bueno e visto cine mudo a color
Qual a placa utilizada para monitorar as 3 baterias li-ion ?
Placa Proteção Bms 3s 25a
does can be put more than 3 cell for 12v batery
Hello . Can you please attach a link to all PCBs used in the video. Thx
Hi!
All links in the description