Hi bạn. Làm sao để tính đường kính lớn, để sau khi cắt vừa với ống bao bên ngoài vậy ạ? Cụ thể là mình làm lõi 27, vỏ ngoài 90. Có làm theo công thức của bạn mà ko đc😭
What this is--- auger --- not archimedes screw. The spiral baffles should be attached to the outside pipe also. Then the entire assembly would turn to form archimedes screw
iirc Archimedes screw is not the one fully submerged on water but only the end of that tube and must be raised or elevated at an angle. otherwise it will just be an auger
Never seen anyone work with PVC like that! Amazing
Thank you
You should have raised it near the end bottom of it so we can see how efficient it is.. But still you amazed me. Nice man!
All from a 775 motor and belt drive, great stuff!
Thanks
@@mr.construction9846 What are the amps on this 12v motor? also do you know the water flow rate?
can it work for small puddles ?
Hi bạn. Làm sao để tính đường kính lớn, để sau khi cắt vừa với ống bao bên ngoài vậy ạ? Cụ thể là mình làm lõi 27, vỏ ngoài 90.
Có làm theo công thức của bạn mà ko đc😭
Schönes Teil was du da gebaut hast, mach weiter so ;)
Thank you 🌹👍👍
Super idea👏👏👏👏👏👏
Thank you
congratulations friend great work 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷
Thanks
Really you work as PVC Master. Very nice. What is a type of first and second glues you used ? Any link ? Thank you.
It is epoxy 611
What this is--- auger --- not archimedes screw. The spiral baffles should be attached to the outside pipe also. Then the entire assembly would turn to form archimedes screw
ok bro
Full supporting
Thanks
Bahut hi Gajab
👍👍👍🌹🌹
Great work but still the Very Same question : which glues do You use? 😅 Especially how do You make your grey paste? With kind of Solvant Please ;)
I would like to know too
@@mikedyferr ㅜ8
I also want to know
It's 511 . epoxy glue
@@mr.construction9846 please provide buying link
Super ❤️❤️
Thanks
I want one for my sluice and highbanker one at each side,,way to go sluicing like a Goose,,.❤
E possível fazer sem eletricidade?
Yes
It can work 24 hours non-stop?
Please change another engine for it
iirc Archimedes screw is not the one fully submerged on water but only the end of that tube and must be raised or elevated at an angle. otherwise it will just be an auger
ok bro
Super
👍👍👍
Pertama nih ☝️
👍👍👍
can you give me the diameters of your central and external pvc pipe please?
Please see in my channel there is a video I show you how to make Archimedes screws. You can make it to any size you want
Could I have a list of all the ingredients please
It includes:
775 . motor
pulley set
the screw part i have 1 video how to do it with custom size
@@mr.construction9846 could you give an attachment to that video please
Bạn có thể cho biết thông số mô tơ được không?
Mr. Construction how could someone contact you? I got some "diferent" idea from others ..
I send you a mail ...
👍👍👍
@@mr.construction9846
I want one how do i get one.
What glue is that
Epoxy 511 bro
invierte las poleas y así tendrás mas caudal y presión
👍👍👍
Xưa mà có cái này đi tát vét thì có phải nhàn ko?
Vét ao hay vét máng 😂😂😂
Bisa gak buat sumur bor kedalaman permukaan air 15 meter
Tidak bisa, karena ini hanya sebatas model kecil dan tidak efisien
@@farhanrailfanscc2066 bang bisa bantu buatkan seperti itu ga🙏
This would work great in flood management in a third work country
👍👍🌹🌹🌹
Video hay dư này mà lại ít viu nhỉ.
Air memutar bilah turbin dan menghasilkan listrik 3 fase, melalui penyearah menjadi listrik DC
Itu ukuran berapa pipa besarnya bang
Ini 75mm.pipa pvc
Pipa 3in
@@mr.construction9846 ka apakah bisa mesen alatnya?
Atau beli alat dan bahannya🙏
puly mua ở đâu vậy
bạn lên shopee tìm thử xem, loại này là loại của máy bào cầm tay
@@mr.construction9846 Cổ dê kích thước bao nhiêu vậy
I want this
There is a video where I show you how to make archimedes screws, please watch and make it for yourself
Just like the Egyptians used to do
👍👍👍
It's nike.
Thanks