*@grain* What happens if you let it run dry from the big bowl? Does it just slowly stop pouring? Or will it start pumping air faster & splash out the water instead?
If it's a perfect seal between the screw and the tube walls, the air flow will overcome the water and make a passageway. Then the air comes in, flows over the water, drags little bits with it up, and that gets spun to the outsides. Once it's there, the spin and seal combined will drag it around in a thin layer at the spin edge while the air is still moving. At a certain point the water at the edges won't be able to move any further up without more spin or more water, and it'll smear out perpetually. If you bump the spin up fast enough to get it all out, with a seal that tight you're gonna have thermal issues but the water would eventually vaporize easier and catch on the air more. It'd run dry, and burn out doing it, I think.
Мощности этого мотора хватило бы и на больший диаметр. Внешняя трубка может вращаться вместе с валом, а это значит, что на 3Д принтере можно изготовить эту деталь целиком, правда тогда это не будет так наглядно, разве что есть прозрачный филомент. У Николы Теслы есть "диод" для жидких и газообразных веществ, но никто не пробовал соединить его в вибромотором, может это окажется эффективнее?
I was thinking if it was at a lower angle and the actual screw had a lip on the edges then it could act almost like a bucket scooping up water and moving it upwards like in this video th-cam.com/video/fHzWA9GLAkc/w-d-xo.html
@@grain8314 If it was at an angle and with a lip it have a chance of actually being an Archimedes screw. This is just a long water propeller entirely dependent on a constant force to propel water against gravity. Archimedes screw is as the other described, basically a screw based bucket. You could turn it by hand and still get water out of a lake or well and in most designs stop without having to worry about water going back down. Some example designs: 1) Just a screw in a tube tilted 45 degrees. Your depending on the integrity of the seal between the screw and wall to lift the water. 2) A scooped screw. Screw is designed with a lip or curve that can hold water on the botom portion at 45 degrees. Leaks will not happen unless the screw itself it damaged. 3) Screw and tube as 1 piece at 45 degrees. Same as 1 but low risk of leaks as its a perfect seal. Same basic principle as 2, a scooped screw, but lazier engenering since its easier to just add waste material (since it uses more material than a scooped screw capable of transporting the same amount of material per rotation). But its downside is I have no clue how to clean/unclog it at small scale All Archimedes screws will take up ~2x more volume than the volume they are meant to transport since the buckets are below the centerline of the screw, and upper half of the screw is functionally useless. At speed they can act like a propeller, but their characteristics as an Archimedes screw are entirely dependent on how much they can transport by lifting, not propelling, the material.
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
Очень интересно ! Никогда не видел как работает винт Архимеда с водой.
Док, Вы неподражаемы! Физика - наше всё!
素敵な装置ですね！
Great work
*@grain*
What happens if you let it run dry from the big bowl?
Does it just slowly stop pouring? Or will it start pumping air faster & splash out the water instead?
If it's a perfect seal between the screw and the tube walls, the air flow will overcome the water and make a passageway. Then the air comes in, flows over the water, drags little bits with it up, and that gets spun to the outsides. Once it's there, the spin and seal combined will drag it around in a thin layer at the spin edge while the air is still moving. At a certain point the water at the edges won't be able to move any further up without more spin or more water, and it'll smear out perpetually. If you bump the spin up fast enough to get it all out, with a seal that tight you're gonna have thermal issues but the water would eventually vaporize easier and catch on the air more. It'd run dry, and burn out doing it, I think.
Como sempre supresas Boas Muito Muito Obrigado
Hey,
What is the diamter of the transparent pipe in which you have fitted the archimedes screw?
Мощности этого мотора хватило бы и на больший диаметр. Внешняя трубка может вращаться вместе с валом, а это значит, что на 3Д принтере можно изготовить эту деталь целиком, правда тогда это не будет так наглядно, разве что есть прозрачный филомент.
У Николы Теслы есть "диод" для жидких и газообразных веществ, но никто не пробовал соединить его в вибромотором, может это окажется эффективнее?
Nice! 👏
This is great! Do you have the .stl files for this project? If you don't mind, I am interested in reproducing this project. Thank you.
I'm glad you're interested. Please - drive.google.com/drive/folders/1wHygMGegwtUfzuDklCPJZN9Bfy7xC5AI
@@grain8314 Thanks very much!
Pour yourself a tall, refreshing glass of blue.
wouldn't the screw work better at a 45 degree angle?
I don’t know, I think it’s important not the angle, but to what height the water rises.
I was thinking if it was at a lower angle and the actual screw had a lip on the edges then it could act almost like a bucket scooping up water and moving it upwards like in this video th-cam.com/video/fHzWA9GLAkc/w-d-xo.html
Maybe, however once the pump was filled with liquid it seemed to be more efficient
@@grain8314 If it was at an angle and with a lip it have a chance of actually being an Archimedes screw. This is just a long water propeller entirely dependent on a constant force to propel water against gravity. Archimedes screw is as the other described, basically a screw based bucket. You could turn it by hand and still get water out of a lake or well and in most designs stop without having to worry about water going back down. Some example designs:
1) Just a screw in a tube tilted 45 degrees. Your depending on the integrity of the seal between the screw and wall to lift the water.
2) A scooped screw. Screw is designed with a lip or curve that can hold water on the botom portion at 45 degrees. Leaks will not happen unless the screw itself it damaged.
3) Screw and tube as 1 piece at 45 degrees. Same as 1 but low risk of leaks as its a perfect seal. Same basic principle as 2, a scooped screw, but lazier engenering since its easier to just add waste material (since it uses more material than a scooped screw capable of transporting the same amount of material per rotation). But its downside is I have no clue how to clean/unclog it at small scale
All Archimedes screws will take up ~2x more volume than the volume they are meant to transport since the buckets are below the centerline of the screw, and upper half of the screw is functionally useless. At speed they can act like a propeller, but their characteristics as an Archimedes screw are entirely dependent on how much they can transport by lifting, not propelling, the material.
What is the diameter of the rod and tube
Can use high ratio gear to fast spinning the screw? will it work? no motor but handcrank gears.
Of course.
What power you have ???? Forte interesant! Ce putere ati folosit la motor, si cam care ar fi eficienta , comparatia cu solutiile clasice?? Multumesc
Putere aproximativ 1-2 wați
@@grain8314 mulțumesc. Pare eficient. S ar putea folosi și în viața reală???
@@miticabadila685 Este doar un șurub arhimedian, un experiment. Pe viață, este mai bine să folosiți o pompă standard.
Cool.
Genial
❤️❤️❤️
you should have printed a screw with partitions (or compartments) along the "screw". It will be much more efficient
have the top be a water wheel that turns the screw when water falls down the wheel. self powered water engine :)
Was he really screwed.
Hi cool do you print archimedes screw for sale
🌟🌷🌟
kind of slow and inefficient