Lure Making GT Popper - Part 1
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2023
- #handmadelure #luremaking #SuchaJerkCustomLures
Time to go BIG: lure making big GT Popper. The first part includes turning of the lure blank on the lathe and preparing through w ire harness. I'm sharing some tips how to efficiently create popper's cup and how to make sure your hardware is up to the challenge of GT fishing 🎣
Saatnya menjadi BESAR: iming-iming membuat GT Popper besar. Bagian pertama meliputi pembubutan blanko umpan pada mesin bubut dan persiapan melalui wire harness. Saya membagikan beberapa tips cara membuat popper's cup secara efisien dan cara memastikan perangkat keras Anda mampu menghadapi tantangan memancing GT. - แนวปฏิบัติและการใช้ชีวิต
Watching from Papua Indonesia 👍🏼
Love making my own lure and Catch decent size GT,, is So Satisfying 😂
I'm sure it is 🙂 I only caught a small one on the minnow in Labuan Bajo 😉 big one is still waiting somewhere for me 🤞
I cannot and will not say anything bad about your lathe turning skills, because I have never used a lathe and probably wouldn't be any better. 😁 The lure blank you removed from it looks pretty sweet. Nice job!
It was more difficult and time consuming then anticipated, but the result was very satisfying indeed 😃 and the second popper (turned without camera pressure) came even easier 💪 take care 👋🎣
@@SuchaJerkCustomLures I know what you mean my friend. I finished making a 4-piece swimbait lure last week using a pinned hinge for the first time and it was a lot more work than the twist-eye joints that I normally use. I wasn't completely happy with the freedom of movement in the joints. So I just finished making the second one this morning and it's much better. Seems we always put a little pressure & stress on ourselves by pushing the limits to new horizons in order to better ourselves. Keep on keeping on!
Watching from south Sulawesi, Indonesia
Hello from Labuan Bajo, Florence, Indonesia 👋
Happy Senior Sunday, greetings again from Maluku, Aru Islands, greetings from fellow lure craftsmen
Happy Senior Sunday to you too 👋 (although me myself I'm 37yo) all the best from Poland 👋🎣🇵🇱🙂
@@SuchaJerkCustomLures Greetings fellow anglers from Indonesia, we do not intend to judge by age, but the knowledge and knowledge that is mastered is what makes the predicate of assessment and level in mastery of a type of work, my brother.
@@bernaduskailemakurfishing a so you meant senior lure maker 💪 thanks in that case 👋
@@SuchaJerkCustomLures he is a professional artificial bait craftsman because judging from the working metal and adequate supporting equipment so that the results of his work are equivalent to those made by manufacturers and we are inspired by many of his work techniques.
Благодарю за видео саветы Спасиба...,,,
Спасибо за просмотр 🙂 привет из Польши 👋🎣
Great job!
Thanks for the video!
Thanks 🙏 happy that you liked it 😃 greetings from Poland 🎣
Piękna praca jak zawsze czekam na efekt końcowy👍🤗🎣
Dzięki 🙂 ale niestety effect końcowy nie jest zbyt powalający 😣 testuje dwie różne nowe epoxy (stara się w końcu skończyła po 6 latach 🫣) i na obu się robią rozstępy, w dodatku przy ostatniej warstwie kot zrzucił z suszarki na papierowy ręcznik, jeszcze klejąca się przynętę 🤦
@@SuchaJerkCustomLures no to się porobiło ,epoxy fajna sprawa ale żeby uzyskać piękny efekt to nie takie proste🤷
Barbaro campeón un buen trabajo gracias por compartir saludos
Gracias por mirar 🙂 saludos desde Polonia 👋🎣
Great.
🙂
Nice ❤
Terima kasih banyak temanku 👋🎣☺️
Ficou top
Obrigado Nildo 🙏
Hi this is very interesting! Would you mind sharing part 2?
Hi Chris and thanks 🙏 yeah... it's coming, slowly but surely 😅 sorry for the delay, I don't have motivation lately for editing process, already 3 new lures footage pending 🤦
Why not buy cheep rolling pins from the Pound shop's, beechwood turns and sand's so good and the rolling pins save half of the work. I really miss my wood lathe, on it most day's until some kind person burnt my shop to the floor at 3am. Police found who did it but they were only 14 years old so nothing was done.
I feel sorry for you mate, terrible stunt by little degenerative C**ts 😡 but thank you for the tip with the rolling pin (the initial part fighting with the corner cutting was the biggest struggle) 🙏👌
Tak do połowy filmu to to nie wyglądało jak wobler ;) Jak sprawdza się ta tokarka? Pozdrawiam
Tokarka mojego kolegi, mi się fajnie toczyło.mimo braku doświadczenia, kumpel też jest zadowolony - wiadomo Parkside robi robotę za nieduże pieniądze 💪 pozdro 👋
Nice work dude 👏👏
Thanks mate 🙏👋🎣
A couge please! That tool used to cut into stock and mark lines!
A couge ?? I googled it, no results 🤔 maybe you misspelled the words ?
마스킹 테이프 어떨까요 😅?
안녕하세요 마스킹테이프 ? 미끼를 만드는데 어떤 부분을 위해??
Jaka jest prawidłowa nazwa szczypiec, których używasz do robienia pierścionków?
allegro.pl/oferta/szczypce-do-ciecia-drutu-szczypce-do-wyrobu-bizuterii-multi-13481053953 to są te same co ja mam 😉
The best copper fash k no comen k
Thank you 🙂👋🎣
Sir. Can youbtell me what size of your wire and what is it called that wire for lure?
Hi 👋 it's a stainless steel welding wire 1.4mm thickness 😉
ACIU UZ IKELTA VIDEO+ PATARYMAI
Ačiū 🙏 Džiaugiuosi, kad tai buvo naudinga 🙂 linkėjimai iš Lenkijos 👋🎣
Request squid jig please
Like yamashita squid jig
I was planning to do one before holiday, but didn't manage in time. Will do before my next holiday, probably in April 😉
@@SuchaJerkCustomLures ok, thank's broo
Hi
Hi Levi 👋 I uploaded on Saturday this time, to see if I get more views over the whole weekend 😉
@@SuchaJerkCustomLures oh that explains why I was so late because I work on Saturday
@@LeviVanSluijs we are currently in Bali Indonesia, so also that's why 😉 I finished editing and posting on the way to the airport in Poland and schedule it for when we were flying ✈️
@@SuchaJerkCustomLures I wish you a very nice vacation in Bali hope you find some cool tropical fish there
@@LeviVanSluijs if I do you'll see it in the next videos
Please learn to use lathe properly 😢
It's not my lathe... that was my first time and I have no opportunity to practice more 🤷
That wire will 100% get pulled out
I did the popper for personal use. My strongest reel is Shimano Spheros 10k with max drag force of 10kg/22lb, I can assure you with that max dragg the wire is safe. Two years ago I caught yellow fin tuna of 11kg/24lb on stick bait with the same wire setup and the lure was not damaged whatsoever.