The problem with the epoxy is that it is too thin. Let it stand for a while until it starts to solidify, then you won't have these "holes". Sometimes it's also the fresh color. 😉
As I mentioned I waited until thick consistency, also heat it up before application, all the tricks from the book and still rubbish performance... So I rather spend an extra few bucks and have peace of mind 😊
Thanks for the tip, but that would lengthen the process significantly, as I like to do many mid coats. Anyhow with the new epoxy I don't have any issues 😉
@@MbFish1ng mogę polecić to, na które w końcu zmieniłem i znowu mogę nałożyć i zostawić przynętę bez opieki, mając pewność że wyjdzie perfekcyjna warstwa bez ani jednego bąbelka 🙂 cena trochę zaporowa bo 100€ z przesyłką za litr 🤑 dostawa w trzy dni ze Szwecji: www.betesbyggarkiosken.se/en/products/epoxy-varnish/true-coat-epoxy-0946-liter-202704/
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
Very nice work. Thank you for sharing.
Thanks 😊 all the best from Poland 👋🎣🇵🇱
Beautiful work 👍👍👍
Thanks 🙏👋🎣
Amazing work. Will catch a gt any day! 👍
Just wondering what the 2-part filler you use is?
Hopefully will catch one day 🤞 it's a car body filler putty, I like it cause compared to SG + BK it sands much smoother 😉
the problem with the resin arises when it is too cold I advise you to use a heating lamp or better heat the room to around 30°
It's 25°C in the room where I am applying epoxy, that should be more than enough, anyhow the new one is spotless each time, so problem solved 🙂
The problem with the epoxy is that it is too thin. Let it stand for a while until it starts to solidify, then you won't have these "holes". Sometimes it's also the fresh color. 😉
As I mentioned I waited until thick consistency, also heat it up before application, all the tricks from the book and still rubbish performance... So I rather spend an extra few bucks and have peace of mind 😊
Try sealing the paint with a water based polyurethane before you resin, works great! And you wont have these issues.
Thanks for the tip, but that would lengthen the process significantly, as I like to do many mid coats. Anyhow with the new epoxy I don't have any issues 😉
Its been a long time buddy
I'm sorry for the lack of uploads, busy times in private life 🙏 from now on I should be able to upload regularly 🤞
Buen trabajo raza gracias por compartir tus vídeos saludos
Muchas gracias 🙂 saludos desde Polonia 👋🎣
Me puedes dar por favor el modelo de tu aerógrafo?
I'm using H&S (Harder and Steenbeck) Ultra, with 0.19mm nozzle 😏
Świetna praca jak zawsze 👍
Dzięki 😊 pozdro 👋
Możesz polecić to epoxy na którym pracowałeś?🧐
@@MbFish1ng mogę polecić to, na które w końcu zmieniłem i znowu mogę nałożyć i zostawić przynętę bez opieki, mając pewność że wyjdzie perfekcyjna warstwa bez ani jednego bąbelka 🙂 cena trochę zaporowa bo 100€ z przesyłką za litr 🤑 dostawa w trzy dni ze Szwecji:
www.betesbyggarkiosken.se/en/products/epoxy-varnish/true-coat-epoxy-0946-liter-202704/
A nie próbowałeś podgrzać wcześniej epoxy do 60 stopni ?Bo podobno pomaga i niema pęcherzyków powietrza 🧐
@@MbFish1ng próbowałem, jeszcze gorzej bo robi się bardziej lejna i jeszcze większe rozstępy się robią 😖
Pink power lol
Pink toy 😈
Been a while forgot about part 1
Sorry😅 it has been busy in my private life 🙏 from now on the uploads should be in regular basis 🤞
Keren....
Terima kasih saudara 🙏👋🎣
Hello good to see you again my friend
Hi Levi 👋 enjoy the video and have a good Sunday 😊
Keren
Terima kasih sobat 🙂👋🎣
150lbs thats my weight
What did I write about that weight?? Don't remember already 🤔
Gt stnding no komen k
Thanks man 😊