I was planning to do it but decided not right before I sprayed it. I figured I could just open the cap because the discoloration makes it hard to see through anyway.
@@SprayWayCustoms good answer...cause now that you mentioned it, I have never been able to see through mine ever that I can remember on most cars I've had. had to open top and look in too!
That engine compartment just keeps getting nicer and nicer.I like the stands you made to support the parts while spraying; I'll be making me some of those. Thanks for sharing!
Great video Spray. I really like that I may have to do all my reservoirs now, they really look good. Keep the great vids coming. Looking forward to the next one.
Such talent! Hey , I was wondering , what about taping off using 3/4 inch tape about couple inches above and below the fill lines on the side- so you can see the fluid levels ? functionality and art?
@SprayWayCustoms I've following you and subscribed to your channel for awhile now and I enjoy watching all of the videos that you post... I live in Florida and I've been seeing g this new product around lately that's been making a lil noise and I thought to myself that it would be cool to see you do a video using it. Its call AllRealGold!
Love the swap bra, just wanted to know. What did u have to do, to change the drive by wire to cable? Thanks for all the video's, got alot of information on the DIY....
@@SprayWayCustoms cool, the engine i have is out of an 03 silverado. Only has 140000 on it. I took it kuzz, it was running when i saw it. Only payed 400 bucks. Didn't want to pass up a deal, so i took it. Even with the dbw set up, was hoping i could change it. Now i know, you da man bra..Thank..
Hello another great job I have a ? Can I put Epoxy first on bare metal expose and putting Hb primer on top of Epoxy then base coat with out sanding I know it wouldn't come out as good just like you said in this video it's just for future reference if I ran out of Epoxy and only had Hb primer that was question 1 And ? 2 anything wrong with using eg Hs primer or clear with (hardener being ms) thank you for this great video
It's a LSSimple Bracket. You can get the compressor and everything together. Here's a vid of it, just leave Mr. Wallace a message and he'll take care of you. th-cam.com/video/CV5cQo_6wrM/w-d-xo.html
Was your car being a b body the reason you used the mounted oil filter? Asking cause im working on a b body and wondering if I would run into the same thing
89ChevyBoiRoy I'm using an aftermarket radiator with dual fans attached. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283528327629
Thanks JJ Isaac Jiu Jitsu. I'll be dropping the complete vid of the LS Swap tomorrow. Here's the link. www.summitracing.com/parts/sum-g3921?seid=srese1&gclid=Cj0KCQiAgKzwBRCjARIsABBbFui4lPM_yOwncGHH7ddlmLCTO1Trn-OPBwTzeCaHUh4J_IhmVApXaq8aAhd7EALw_wcB
Man sprayway you be making magic keep up great work🏆
Thanks AJ
The touch of a Master's hand. Awesome
I appreciate you
SprayWayCustoms were you get that radiator support at
Should have left an unpainted strip down the side of the reservoirs so that you can see the fluid level, but it still looks good.
I did three unpainted dots for that.
I was planning to do it but decided not right before I sprayed it. I figured I could just open the cap because the discoloration makes it hard to see through anyway.
@@SprayWayCustoms good answer...cause now that you mentioned it, I have never been able to see through mine ever that I can remember on most cars I've had. had to open top and look in too!
🤣🤣I know right
My nerves feel 100% better after watching that video
😂😂Thanks for the support
That Chevy is looking good.. The suspense of seeing the final completion of the Landau is killing me. Lol.. Cant wait to see it done
Stay tuned. Appreciate the support
@@SprayWayCustoms Aye Pimp you know you got our eyes.. We watchin/Learning.. Cant speak for everyone else but I appreciate you.. keep posting Boss
Man oh man SprayAwayCustoms i don't know anybody else who can do it better than you. Just when i have you figured out you step it up one more notch
😂😂😂I ain't doing to much of nothing. Thanks PSE
That engine compartment just keeps getting nicer and nicer.I like the stands you made to support the parts while spraying; I'll be making me some of those. Thanks for sharing!
Thanks for the compliment
sprayway still getting down. can't wait for the completion of the box Chevy. good work G
Thanks for the support
Spray, you do absolutely amazing work.........
Thanks Al
Dam!! Bro you got a cold spray game fasho hands down.. 💯💯
Much appreciated
Preparation is great as usual - painting is flawless ! Fantastic .
Thanks Rickey
Can’t wait to see the brougham LS and landau finished 💪🏽
Thanks...I gotcha
Thank you Sir. I learn something new with each film. Take care of yourself.
Ok Jake...Thanks
Wat a beauty I wish my truck looks like that But I want blue on my lol
Thanks Robert. That was my second color option. I went with red because my brake and suspension parts gonna be red also.
I did the same thing to my overflow buckets don't look as good as your look real good Spray glass house🙌💪👍✌
@Mister Fabricator Right 😁✌
I was just trying to put some color on it..I wasn't going for a totally smooth surface. Just scuff and paint but it came out decent. Thanks y'all
@@SprayWayCustoms No problem Spray i did turn pretty good 👍✌
Turned out great. I always appreciate your attention to detail
Thanks Russ
Looks good. I plan on pulling front clip off my blazer this winter to paint and detail under hood
That'll be the perfect time to get it done. Thanks
Man your attention to detail is just plain wicked my brotha your definitely blessed with mad skills keep it up👍👍👍👍👍👍👍👍👍
Thanks Ted
Good work bro that thang lookin nice 👍
Appreciate you family
Great video Spray. I really like that I may have to do all my reservoirs now, they really look good. Keep the great vids coming. Looking forward to the next one.
Thanks 🙏
You making painting look so easy to do. Landau is going to clean when you finish it
Its not hard for real just a little time and dedication. Thanks
SprayWay all day, baby! Fantastic work as always.
Thanks Paul
Thanks for the update bro,she is looking nice!
Thanks Tim
Once again you did outstanding work my friend keep up the awesome work my brotha
Thanks Niko G
2x spray way is magic
Appreciate you
I like your videos 🤘🏽 especially the sunroof one lol I’m almost don’t with mine as well 🤘🏽🤘🏽 next is paint on the car
Great 👍🏾 thanks
Coming through to show some support and hit that like button for you. Keep up the great work fam!
Thanks for the long time support
That's gonna be a badass ride
Thanks Jeff
Cool idea. The brake master cylinder needs some paint love. 😉
I'm going with Wilwood disc brakes with a Wilwood master cylinder so when I start on that I plan to paint the booster also... Thanks 🙏
once again fantastic work
Thanks
Blessing to u bro n ur loves ones n heres another great vlog from the best at what here does keep up the gd work bro 🙌🙌🙏
Very much appreciated Hector 🙏
#GREATNESS... man u moving fast on that 2 door... looking gwood... great video.... #SprayWayCustoms...
I'm trying to. Thanks 🙏
That looks great, I get good ideas from your videos. Mine won't look as wonderful but I'm trying. 👍
Thanks....you got it just take your time
Thats whats up man might use that ideal on mine just leave a strip on the coolant for sight glass but over all thanks for the ideal
Thanks for the comment and support 👍🏾
The king of bling!!!👑👑👑👑👑
Appreciate you
Looks good SprayWay!
Thanks Tony
Turned out nice. Just a suggestion: mask off a little measuring line to see through like on the motor oil bottles being there’s no level sensor
I was gonna do that but I was like I'll just open the cap up to check it. Thanks 🙏
The best to ever show it bruh!
Thanks
I was a little worried about messing up the chrome radiator cover but it does make the engine bay pop.
Yes it did have a nice chrome finish on it but I didn't want to go with too much chrome. Thanks
What's the part number for the chrome radiator support?
Parts look good bro 💪🏾 it’s gonna be nice under the hood of the Box Chevy
Thanks UPK 👑
Looking good! Coming along nicely!
I'm trying. Thank you 😊
Love the way it looks fire
Thanks Brian Dileo
Coming out pretty dam good. 👍🏿👍🏿👍🏿
Thanks
Looking good under the hood.
💪 💯
I'm trying. Thanks Mike
Nice like always brother.🤙🏼
Thanks
Nice work bruh bruh 💯
Thanks
@@SprayWayCustoms no problem bruh 💯
Such talent! Hey , I was wondering , what about taping off using 3/4 inch tape about couple inches above and below the fill lines on the side- so you can see the fluid levels ? functionality and art?
That was an idea when I was doing it but I decided not to. It's not a big deal to just pop the cap and check it. I appreciate you
Tuned in... great video.
Thanks for staying tuned 👍🏾
As expected came out amazing! Now on to the rest of the car? Can't wait to see it
Thanks Scott
Happy 100th Video 👏
Yes it's my 100th vid...great notice 😁
You did a great job. I love stuff like this my husband does alot of this will stay connected. Got you locked in bell too
Thanks for the support The G Family
Nice job bro keep your good work up.. I'm still learning from you..👍
We all learning..Thanks
Always A1 work brother
Thanks Antonio
@SprayWayCustoms I've following you and subscribed to your channel for awhile now and I enjoy watching all of the videos that you post... I live in Florida and I've been seeing g this new product around lately that's been making a lil noise and I thought to myself that it would be cool to see you do a video using it. Its call AllRealGold!
I just was looking at the AllRealGold the other day... Thanks
Love the use of the duct tape lmao ! Another great video my friend.
Appreciate you
Great job....keep it up.. 👍
Thanks Arnold
LS swap looking good
Thanks SmoothReleaseRecords
Hello a great job perfect 👌 the colour is nice 👍 from Germany 🇩🇪 👋👋👋Kai
Thanks 🙏
Damn fam you got them million dollar hands...
Appreciate you
My boy back at it again
Thanks Milton
🔥🔥🔥"sprayway"🔥🔥🔥
Appreciate you
That's genius, I've never thought.of or seen this done before. Did you think of this idea?
No...I've seen others do it
Love that work fam 💪🏾💪🏾💪🏾💪🏾✊🏽
Appreciate you
Love the swap bra, just wanted to know. What did u have to do, to change the drive by wire to cable? Thanks for all the video's, got alot of information on the DIY....
The wire harness, throttle body and cable
@@SprayWayCustoms thanks bra, headed to junk yard tomorrow.
No problem at all. I just got my throttle body out of an old Tahoe...you don't have to get one from a Corvette or Camaro.
@@SprayWayCustoms cool, the engine i have is out of an 03 silverado. Only has 140000 on it. I took it kuzz, it was running when i saw it. Only payed 400 bucks. Didn't want to pass up a deal, so i took it. Even with the dbw set up, was hoping i could change it. Now i know, you da man bra..Thank..
Good Sunday notification
Better late than never. I planned to upload it on Saturday.. Thanks 🙏
Hi Bro. Great work. Do you know the part number or where the get the radiator support cover?
Summit Racing SUM-G3921 for $23.99
bro you give me many ideas for my ride and how to do it
Great…thanks for watching
You are best of the best man.....I love all ur work.....where are you base could you do work for my chevy 1989 K2500?
Thanks, I'm in Alabama
Hello another great job I have a ? Can I put Epoxy first on bare metal expose and putting Hb primer on top of Epoxy then base coat with out sanding I know it wouldn't come out as good just like you said in this video it's just for future reference if I ran out of Epoxy and only had Hb primer that was question 1
And ? 2 anything wrong with using eg Hs primer or clear with (hardener being ms) thank you for this great video
Yes you can do that but like you said it's not gonna be the smoothest finish without sanding it first
Great Job Man, do you mind sharing what bracket/compressor and lines you used for your a/c setup?
It's a LSSimple Bracket. You can get the compressor and everything together. Here's a vid of it, just leave Mr. Wallace a message and he'll take care of you. th-cam.com/video/CV5cQo_6wrM/w-d-xo.html
Thank you I appreciate you and all the work you do to make this channel great.
Clean
Thanks
🔥🔥🔥 dope work
Much appreciated
Just sunscribed to your channel bro and that chevy ah beast
Thanks for subbing 👍🏾
Dope dope dope bro great video
Much appreciated
So nice!
Thank you 😊
👍🏾the right way now I no to put bulldog on all my plastic thsnks
No doubt Tweet G. Thanks
Was your car being a b body the reason you used the mounted oil filter? Asking cause im working on a b body and wondering if I would run into the same thing
You can just use the muscle car oil pan if you would like
First she looking good fam
Look like magic like always the right way
Much appreciated Pete 👍🏾
Can't wait to hear her run
Hit my line fam
Great content as usual good bruva
Appreciate you
Sprayway all day fam so talented bless up came out great
Appreciate you like always Eddie
Show car quality work as usual. Are you installing the motor yourself?
No I'm not but I pretty much been there through the whole process.
You the man!
Thanks
Bro where you get you alt and a/c brackets I need that
LSSimple th-cam.com/video/CV5cQo_6wrM/w-d-xo.html
Looking good swc
👌
Explain clear coat mine flaked off really bad on rear spoiler
That was in the sanding if it flaked off
what kind of electric fans you using for ls i got same radiator support as u
89ChevyBoiRoy I'm using an aftermarket radiator with dual fans attached. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283528327629
I salute 💯💪🏾
Thanks
Looks good. Where did you get that radiator cover? I been looking for one
Summit Racing for $23.99 part # SUM-G3921
Have you did door pods on a 2001 excursion rear passager doors
Not yet...sorry
@@SprayWayCustoms I would like to send u some picks .
@@SprayWayCustoms I'd like to send you some pics of some suggestions what to do I do like your videos better then some of the other ones
Hey fam where did you get the radiator support cover from ?
Summit Racing. www.summitracing.com/parts/sum-g3921?seid=srese1&gclid=EAIaIQobChMI872etLPk6QIVAY_ICh10wApmEAQYASABEgLGMfD_BwE
Sweet
Thanks Walter
EXCELLENT. A1. Topnotch. Fo sho. Salute. 👍🏾💯
Thanks fam
Good shit bro I like it
Thanks Jay
Lookin Good Brutha
Thanks Joe B
Do you have a link for the radiator cover?
www.jegs.com/i/JEGS/555/97022/10002/-1?gclid=EAIaIQobChMIlZWUzKG08wIVsXxvBB1mOAHmEAQYAyABEgIgC_D_BwE
Nice work where are you located in Bama need some accessories painted
I'm in Decatur, Alabama
Where you got the radiator support from? Im looking for one for my 87 landau
Summit Racing. www.summitracing.com/parts/sum-g3921?seid=srese1&gclid=EAIaIQobChMIjoH089fJ7AIVka_ICh0VpgYDEAQYASABEgKrKvD_BwE
Will it fit a 4 row radiator?
Detail means alot
Sure do 👍🏾
The box gone be A1💪💪..Sprayway did you swap the motor yourself?!🤔 .....
No I didn't. Thanks 🙏
Can I please get a part number or link for the radiator support? I love your videos bro
Thanks JJ Isaac Jiu Jitsu. I'll be dropping the complete vid of the LS Swap tomorrow. Here's the link. www.summitracing.com/parts/sum-g3921?seid=srese1&gclid=Cj0KCQiAgKzwBRCjARIsABBbFui4lPM_yOwncGHH7ddlmLCTO1Trn-OPBwTzeCaHUh4J_IhmVApXaq8aAhd7EALw_wcB