The 2022 Can-am X3 Gets Its First Oil Change | Full Service

I have owned my 2022 Can-am X3 XRC Turbo RR for six months now and figured it is time to do the first service. I figured I would make a video out of it. In this video I show how to change the oil on my 2022 Can-am X3 XRC Turbo RR. The process should be roughly the same with all can maverick X3's. I also show how to remove the air filter and clutch cover in case you were thinking about doing this yourself. Very easy to do maintenance on your machines. Why pay someone when you can do yourself in your own garage. If you have any tips on how to make this process easier, feel free to drop them below in the comment section. Enjoy!
LIKE, COMMENT AND SUBSCRIBE!!!!!
Bow Case Install Video: • The CHEAPEST Can-Am Ca...
Bow Case Link: www.amazon.com...
Follow on personal Instagram @go_fast_dont_die_
Follow on Snapchat @forzathekid
Follow on Twitch @Forza_JKUR
/ forza_jkur
Follow on TikTok @go_fast_dont_die_
Current toys:
2022 Can-Am XRC Turbo RR
2009 Jeep Wrangler Unlimited Rubicon
2022 Ram 3500
2015 Honda Grom
2019 Cub Cadet Lawn Mower

[@paullaske56]

I drilled out the rivets and added rivet nuts on the skid plate for easy removal. I use a fluid extractor in reverse to pump the premesured oil back in. I drain the oil with the engine cold and add new leftover oil from the last change and let it drain overnight. You can see how it rinses the engine out.

[@garyhenion9459]

Nice job
I pull my air filter after every ride, just to make myself feel good
We’ve only been putting on miles at Silver Lake

[@JakeAlexander]

I need to make it more of a habit. I didn’t expect it to be as bad as it was.

[@dustyfarmer]

Might be time for an S & B Particle separator to keep those airfilter dust levels down. Use a paper towel packed in around the oil filter case to catch the oil when you take the lid off. Wash the car/engine area clean before you work on it

[@JakeAlexander]

The filter cap wasn’t to bad, but the dang skid plate definitely screwed me 😂

[@dustyfarmer]

@@JakeAlexander I hear ya, oil everywhere except down the provided hole. I've got a bigger new oval sideways funnel for next time. Some people drill out the pop rivets & Rivnut & bolt up that rear HDMWPE skidplate but I didn't want to leave rivet ends & drill shavings rolling around in my frame rails.

[@forza_jkur]

Nice!

[@afpskierx]

@Jake Alexander, what tires do you have on that machine?

[@JakeAlexander]

Still got stock 32” maxxis liberties

[@afpskierx]

@@JakeAlexander Did you have to re-clutch to go up to the 32" tires?

[@JakeAlexander]

@@afpskierx no they come stock with 32” tires

[@joshwalton8561]

Decent.

[@mcmg2635]

Looks like you made a mess 😂

[@razzernation7184]

Definitely made a mess

[@JakeAlexander]

Yeahhhh…about that…