How To Fix A Seized Lawn Mower With Marvel Mystery Oil

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2024
  • Welcome to this video on how I managed to fix my seized Briggs & Stratton lawn mower with Marvel Mystery Oil and a little elbow grease! Hope this helps!
    Disclaimer: Due to factors beyond the control of JBroFix, I cannot guarantee against improper use or unauthorized modifications of this information. JBroFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. JBroFix recommends safe practices when working on lawn mowers and or with tools seen or implied in this video. Due to factors beyond the control of JBroFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not JBroFix.

ความคิดเห็น • 26

  • @newsmancook6621
    @newsmancook6621 ปีที่แล้ว +11

    Thanks for this video I followed your video and saved $350-$400 dollars with your video.The cost of Marvel Mystery Oil was $6.00.Thank you.

  • @RealMatus
    @RealMatus 6 วันที่ผ่านมา

    Worked like a charm. I was using lawnmower when smoke started coming out. And shut off. Changed the oil (completely black almost gray). Replaced carburetor, spark plug with a kit. Flushed the gasoline. Still wouldn’t turn on. Tried this and worked. Bit of smoke at the beginning but now runs like new. Thank you.

  • @jeremeygloyd2894
    @jeremeygloyd2894 4 หลายเดือนก่อน +5

    Hey, thanks for your video man. All of you people out there who put knowledge out for the world do use to benefit us means a lot more than money so thank you.

  • @paulkwilliamson5829
    @paulkwilliamson5829 ปีที่แล้ว +6

    Did everything just as you suggested and - It Worked!! Thanks!

  • @leoschneider3570
    @leoschneider3570 3 หลายเดือนก่อน +3

    Remember to hold the lever on the handle bars down to disengage the engine brake, (that happened once when I thought it was seized 😅)

  • @sluggonotnancy6178
    @sluggonotnancy6178 11 หลายเดือนก่อน +3

    Ahhh....that "Mystery Oil!"....it's magic. Cool video. I'm going to try this on my hedge trimmer.

  • @FingerprintingGurus
    @FingerprintingGurus 5 หลายเดือนก่อน +2

    Thanks! This worked to it's fullest I followed the directions word for word

  • @emoshnz1
    @emoshnz1 หลายเดือนก่อน +1

    Thank you for this video it fixed my ceased motor even with lawn mower oil...you are a 💎

  • @michaelbarhorst1710
    @michaelbarhorst1710 4 หลายเดือนก่อน +2

    Saved a brand new mower. It had been run with no oil and froze up. Fixed it in 15 minutes!

    • @MIXMCX
      @MIXMCX 12 วันที่ผ่านมา

      Mine is a riding mower and is seized up and won't turn I hear a click and wine like it gonna turn but won't move. Was this your issue? And where did you do same as this video?

  • @salemblair6272
    @salemblair6272 หลายเดือนก่อน +1

    He'll yea thanks 😊

  • @chrystalthomas7687
    @chrystalthomas7687 21 ชั่วโมงที่ผ่านมา

    What if you do all that and it pulls 5 or 6 times and then locks bk up again please help

  • @John_GGG
    @John_GGG หลายเดือนก่อน +1

    I think I should have watched this before apparently killing my lawn mower.

  • @kilowatttheorignal
    @kilowatttheorignal 4 หลายเดือนก่อน +2

    I just need this to work on a motorcycle engine that got rust ridge. Im letting it sit a month

    • @kilowatttheorignal
      @kilowatttheorignal 3 หลายเดือนก่อน

      Whoever is curious, it worked after a month and a half and a breakerbar with a cheater on it. Directly on the sprocket bolt

    • @CenturionsofFaithMichaelPoehls
      @CenturionsofFaithMichaelPoehls 2 หลายเดือนก่อน +1

      @@kilowatttheorignal that is awesome

  • @yogibarista2818
    @yogibarista2818 11 หลายเดือนก่อน +3

    This probably only works because there's little difference between a "good" and "damaged" Briggs & Stratton engine at the best of times - they are always crap engines that somehow manage to run.

  • @joesinakandid528
    @joesinakandid528 2 ปีที่แล้ว +1

    If you don't fix whatever locked it up the first time you're just waiting for it to lock up again - maybe with a lot of broken aluminum.

    • @Youtuberdeportado
      @Youtuberdeportado ปีที่แล้ว +4

      Maybe it was just a lack of oil,let's be a little positive here.

    • @Killerthemerc
      @Killerthemerc ปีที่แล้ว +2

      That's not always the case seizures mostly come from overheating from friction and lack of lubrication or a worn out beaten up old engine recommend deep penetration oil to keep them old Briggs running

    • @ironwood9
      @ironwood9 ปีที่แล้ว +1

      ​@@TH-camrdeportadoyeah! I've been overwhelmed with family issues and just have neglected checking/changing oil... so that's more than likely what the problem is...if this works, I know time is short....
      .... can I use PB blaster instead?

    • @Jj-qn2nz
      @Jj-qn2nz 11 หลายเดือนก่อน +1

      What size socket did you use

    • @Jj-qn2nz
      @Jj-qn2nz 11 หลายเดือนก่อน +1

      To turn the engine

  • @Killerthemerc
    @Killerthemerc ปีที่แล้ว +4

    As a former mechanic myself dont let your engine get seized like this cuz all you have now is a fancy paperweight

    • @jckdnls9292
      @jckdnls9292 8 หลายเดือนก่อน +3

      Capt obvious