You can spray paint your pieces black then lay it on a whit background. Take the picture as straight as possible. Bring it into Inkscape, bitmap it and scale it according to the size of your actual part.
The best explanation yet, Thank you. I am waiting for the delivery of my 4x4 modular today. I ordered it with gear reduction and homing switches, Anything I need to look out for while assembling? Please produce more tutorials.It's great to have audio and explanations in laymen's terms. Outstanding.
I just got my STV CNC table with the Hypertherm Power Max 65 Sync. I can not figure out why I keep getting a limit switch error whenever I start to cut. Everything works as it should during the simulation mode, so I test the hand torch on the hypertherm and it cut great. I then unplugged the limit switches and I was able to cut with the machine torch on the table. I have no clue what is going on. Has anyone had experience with this or a similar problem?
Thanks for the info 🔥 do you design everything in Inkscape? I’m looking to learn to design for CNC and would like to know what software is user friendly
Cutting speed one is the normal cutting speed. Cutting speed two is for details smaller than 20mm or preset value in settings. This is so you will have less of an angle on smaller cuts. Cutting speed two should be about 60% of cutting speed one.
Mike..Thanks for the tutorials...just bought a 4 x4 Pro stv table a coupla weeks ago...banged up a coupla homing sensors already. Big learning curve..trying to get my THC from lifting too high after it starts to cut....Again..Big help....from your videos..
Make sure the PC (I don’t know the name of it but the one where all the cables are) make sure you have your computer plug to that one. And then click on reset and is gonna fix the issue.
Would you mind sharing where you picked up your computer monitor set up? Thank you
Honestly my son gave it to me, it is an "affordable" gaming setup
Is there a way to scan photos and simply change it into drawings you can cut
You can spray paint your pieces black then lay it on a whit background. Take the picture as straight as possible. Bring it into Inkscape, bitmap it and scale it according to the size of your actual part.
The best explanation yet, Thank you. I am waiting for the delivery of my 4x4 modular today. I ordered it with gear reduction and homing switches, Anything I need to look out for while assembling?
Please produce more tutorials.It's great to have audio and explanations in laymen's terms. Outstanding.
just make sure everything is square and level. contact me anytime. @juggernautweldfab on facebook subscribe to my channel if you havent
What class did you take?? I’d like to take it because this this busting my chops bad
Hi are you doing any more videos, your the only guy I can find using myplasm and explaining it. Great videos thanks, Dai
@juggernautweldfab on facebook message me anytime for help and please subscribe if you haven't
Hi . Your doing a grate job . could you please make a video . Showing how to cut from the edge of the plate
I just got my STV CNC table with the Hypertherm Power Max 65 Sync. I can not figure out why I keep getting a limit switch error whenever I start to cut. Everything works as it should during the simulation mode, so I test the hand torch on the hypertherm and it cut great. I then unplugged the limit switches and I was able to cut with the machine torch on the table. I have no clue what is going on. Has anyone had experience with this or a similar problem?
contact Barry at stv they have a solution for that
Change conections to no to nc or viceverse
Thank you for the info brother! I just got my table and your pointers were extremely helpful! 🇺🇸
Thanks for the info 🔥 do you design everything in Inkscape? I’m looking to learn to design for CNC and would like to know what software is user friendly
I do my signs in Inkscape, and I use either fusion 360 or minicad for brackets and things of that sort.
What classes do you recommend taking?
honestly CAD would be a great one. I think you can learn alot on your own just figuring out what doesn't work.
Thank you for this video! Looking forward to part 2.
great job
Where did you get the rubber cover to shield the arc? Great video and very informative!
I was going to ask the same question.
ity is just a rubber kitchen funnel on amazon
@@Windburned amazon sells rubber kitchen funnels cut the tip off
@@juggernautweldfab thank you son much!
I highly recommend using the game controller, helps tremendously!
i have one but i dont use it often.
Where did you get your splash guard ?
It was the first prototype STV made for me, they have them on their new optimum tables now.
Cutting speed one is the normal cutting speed. Cutting speed two is for details smaller than 20mm or preset value in settings. This is so you will have less of an angle on smaller cuts. Cutting speed two should be about 60% of cutting speed one.
Great tutorial. Camera man was on point as well. Thanks for the info 👍
Mike..Thanks for the tutorials...just bought a 4 x4 Pro stv table a coupla weeks ago...banged up a coupla homing sensors already. Big learning curve..trying to get my THC from lifting too high after it starts to cut....Again..Big help....from your videos..
contact me anytime for help on facebook @juggernautweldfab
How can I add fonts or make a font 🤔
Do you have a link for the automatic homing kit ?
STVCNC sells them.
when i try to connect my computer it says communication error.. not sure what to do :(
Make sure the PC (I don’t know the name of it but the one where all the cables are) make sure you have your computer plug to that one. And then click on reset and is gonna fix the issue.
get a better usb cable