I am not getting power to one of my stepper motors. I can hook it up to the other driver get power and swap the power from the working driver and get power to one or the other motor. It's starring to seem like the Myplasm controller is bad as I've already replaced the leads to the motor and driver from the controller.
Hi, i have very long list of wishes from customers. I can't add all because main idea of this system is so simple, it couldn't be easier!. But most interesting function what not complicate the software i always try to add if will be helpful for lot of users, not for you only ;) send me email to contact@proma-elektronika.com please !
this is simple and useful. (DYNAMIC PIERCING). machine go to position z go down touch the material. here start 1 touch material the torch go up to transfer height ( user define height. 2 after the arc is transferred the system detect the arc ignition and go higher height PIERCE HEIGHT. (user define HEIGHT and time) 3 when the time delay is reached then cut height and move. easy and not so complicated. 1 touch 2 transfer height 3 pierce height 4 cut height X Y move. this help when process thick metal make an successful arc transfer and the pierce height take care for consumables. what do you think? take this in consideration please.
go to MyPlasmCNC/store folder and open (by notepad) "store.fms" file . Then you can found your password below eSpec5 text. after enter password in MyPlasm CNC software you can delete it ( or change ) in special function window.
One final question.. how do I delete a project and import another. I clicked the project on the screen and hit delete on the keyboard but nothing happens
Hi. Rotary axis on flat table ( using the same Y axis ) is not good idea. If you want to do it ( not recomended ) then you can connect both Y motors to Y output. Controller has 4 axis only. But can connect 4 drivers to one axis.
This is a great plasma controller!
Amazing 👍👍👍👍👍
I am not getting power to one of my stepper motors. I can hook it up to the other driver get power and swap the power from the working driver and get power to one or the other motor. It's starring to seem like the Myplasm controller is bad as I've already replaced the leads to the motor and driver from the controller.
How do you center a sheet on the software?
Is It important use shielded cable in nema 23 coil wires? I have all other wires shielded.
Es posible subtítulos de estos vídeos en español?
Gracias.
Hi. It's TH-cam option - you can change to Espanol !!! ( on PC version )
Como puedo adquirir el equipo soy de mexico
hi i have some ideas for add to the next myplasm software release. if you are interested let me know
Hi, i have very long list of wishes from customers. I can't add all because main idea of this system is so simple, it couldn't be easier!. But most interesting function what not complicate the software i always try to add if will be helpful for lot of users, not for you only ;)
send me email to contact@proma-elektronika.com please !
this is simple and useful. (DYNAMIC PIERCING). machine go to position z go down touch the material. here start 1 touch material the torch go up to transfer height ( user define height. 2 after the arc is transferred the system detect the arc ignition and go higher height PIERCE HEIGHT. (user define HEIGHT and time) 3 when the time delay is reached then cut height and move. easy and not so complicated. 1 touch 2 transfer height 3 pierce height 4 cut height X Y move. this help when process thick metal make an successful arc transfer and the pierce height take care for consumables. what do you think? take this in consideration please.
@@kelvinespinosa1430 It's working like you wrote... Look to user manual page 29
www.proma-elektronika.com/download/MyPlasm/MyPlasmCNCen.pdf
Is it ok if i use it with Closed Loop Stepper Motors?
yes
Every time I try to access the configuration menu it asks for a password. What password do I use? I can't set my xy and z limits
go to MyPlasmCNC/store folder and open (by notepad) "store.fms" file .
Then you can found your password below eSpec5 text.
after enter password in MyPlasm CNC software you can delete it ( or change ) in special function window.
or delete "store.fms" file then all software will be restore to factory ( without password ) but need all configuration again.
One final question.. how do I delete a project and import another. I clicked the project on the screen and hit delete on the keyboard but nothing happens
@@758Redwhulf by import window
Can i use JMC Servo Motors?
Yes, if it accept Step/Dir signals.
Hi can I use 2 drives of Y and the additional output for rotary axis?
Hi. Rotary axis on flat table ( using the same Y axis ) is not good idea.
If you want to do it ( not recomended ) then you can connect both Y motors to Y output.
Controller has 4 axis only. But can connect 4 drivers to one axis.
Can i use JMC Servo Motors?
Yes, if it accept Step/Dir signals.