Thank you so much for this! I’ve watched like four other videos and this one is the most thoroughly helpful at explaining every inch of the car seat. I feel confident enough to install this seat correctly.
Hi. Are you installing it in a Model X? What I do is pull it as high as I can on the shoulder of the vehicle seat and pull it as snug as I can. It seems to stay like that, but I’ve only had carseats installed for several days at a time since my kids are older now. You could try loosening the tether a smidge to see if overtightening it is causing it to slide down.
Good question! No, the tether cannot be used when rear-facing. Nuna either hasn’t tested it that way or they have and it failed, so just attach it to the storage area and wait until forward-facing to use it.
Hi Valerie. Are you talking about the legrest on the Rava? If so, you pull down on it slightly and push it in. It's a different kind of a motion, but not hard to do once you get it.
@@CarSeatSite Thanks for responding! No it's a rebound bar that attaches to the seat... I think it's only on the Canadian model as the bar is required here but not in the US.
Valerie, unclip the snap on each side and pull on each side to get the ARB off. Here's a manual with the instructions in it: nunababy.ca/common/sitemedia/IMG-0064F_RAVA_CA%20(LR)-19431363-1.pdf .
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
Thank you so much for this! I’ve watched like four other videos and this one is the most thoroughly helpful at explaining every inch of the car seat. I feel confident enough to install this seat correctly.
I’m so glad you found the video helpful! Boosting your confidence so you can install your carseat safely yourself is why I make the videos. 😊
Thank you! I installed the car seat in less than 5minutes after watching your video.
Thanks! I'm so glad the video helped you!
Thank you! We just started forward facing, and this video helped correct what we were doing wrong. ❤️
Thank you! I'm glad it helped you! Please subscribe if you haven't yet-I'd appreciate it 😊.
I also love love love the timestamp!❤️
Very helpful- thank you so much!
Thank you! Glad it helped you out!
The top tether strap slides down and if tightened causes the car seat to tilt toward that direction. Do you have any tips?
Hi. Are you installing it in a Model X? What I do is pull it as high as I can on the shoulder of the vehicle seat and pull it as snug as I can. It seems to stay like that, but I’ve only had carseats installed for several days at a time since my kids are older now. You could try loosening the tether a smidge to see if overtightening it is causing it to slide down.
Thank you!
Thank you:)
You're welcome!
Thank you
Thanks a lot.
PLEASE DO THIS IN A 3rd ROW
Can I use tether on rear facing mode ? Is it safer to do so ?
Good question! No, the tether cannot be used when rear-facing. Nuna either hasn’t tested it that way or they have and it failed, so just attach it to the storage area and wait until forward-facing to use it.
Hello! Can you please tell me how to remove the rebound bar? Thanks!
Hi Valerie. Are you talking about the legrest on the Rava? If so, you pull down on it slightly and push it in. It's a different kind of a motion, but not hard to do once you get it.
@@CarSeatSite Thanks for responding! No it's a rebound bar that attaches to the seat... I think it's only on the Canadian model as the bar is required here but not in the US.
Valerie, unclip the snap on each side and pull on each side to get the ARB off. Here's a manual with the instructions in it: nunababy.ca/common/sitemedia/IMG-0064F_RAVA_CA%20(LR)-19431363-1.pdf .
Thank you :)