Nice video, but I got to say, I started laughing when you said hoppos has a video you can check out about breaking in the motor. I was like, I am pretty sure they also have a video on assembly of a single dump pump. But it is nice to see that you are still active and making content.
Great stuff as usual! Hey my car is running a 4 pump/10 batt setup, the rear recently lost power and I can only get it to go about 1/4 way up now. My electrical seems solid so I’m wondering if maybe weak motors, bad seals, or something. Weird that it happened to both rear pumps at the same time
Het a load tester and check your batterys if both pumps are having the same problems start with your batterys...I have a video coming up with this same problem
@@thecadillacdanshow8658 I’m running 5 batts per bank with only 24v going to each rear pump from separate banks. All batts read 12.8v, full of fluid, it was working fine and then slowly would run out of power towards the top until it got to the point of barely being able to raise 1/4 of total travel. I’m thinking maybe a gear jamming up now
@@CGOD I would still start with a load test it will show if you have a bad cell in a battery a volt meter will just show that the battery has voltage if that makes sense
That fly. Sounds good in the headphones lol😂
Nice video, but I got to say, I started laughing when you said hoppos has a video you can check out about breaking in the motor. I was like, I am pretty sure they also have a video on assembly of a single dump pump. But it is nice to see that you are still active and making content.
They may I just know off the top of my head about the motor videos
Love this video thanks for the help.
No problem hit me up if you have any questions
You can wrap the wire on the dump cartridge or use a big eyelet wire connector on the dump cartridge also.
Great stuff as usual! Hey my car is running a 4 pump/10 batt setup, the rear recently lost power and I can only get it to go about 1/4 way up now. My electrical seems solid so I’m wondering if maybe weak motors, bad seals, or something. Weird that it happened to both rear pumps at the same time
Het a load tester and check your batterys if both pumps are having the same problems start with your batterys...I have a video coming up with this same problem
@@thecadillacdanshow8658 I’m running 5 batts per bank with only 24v going to each rear pump from separate banks. All batts read 12.8v, full of fluid, it was working fine and then slowly would run out of power towards the top until it got to the point of barely being able to raise 1/4 of total travel. I’m thinking maybe a gear jamming up now
@@CGOD I would still start with a load test it will show if you have a bad cell in a battery a volt meter will just show that the battery has voltage if that makes sense
@@thecadillacdanshow8658 that’s true also, I’ll get with ya on Facebook
@@thecadillacdanshow8658 ? What does a piston or a adel adex dump do for the hydraulics for the front? Thanks 👍🏼🙏🏼 what's better for hopping?
Do you have a how to on kitty hair fiberglass 1/4?
Not yet
No sound Dan
??? I have sound on my side
To much talking 😢😢😢 but was helpful
Sometimes you got to take the good with the bad. I'm glad it could help though I was just trying to cover a lot of common mistakes I see people have
𝐩яⓞ𝓂𝓞Ş𝐦 😇