The trick is not to over tighten the central spindle nut there needs to be a tiny gap between the jet arms and the white washers. If you got full jet pressure from the heads I recommend you to loosen the nut a bit then try it out. Just fixed mine which was not spinning.
thanks. Got mine out yesterday and it wouldn't spin. I didn't work out how to get the nozzles off so this was useful. What i did was take off the centre screw and put some grease on it then it started spinning but still wasn't great. I notice yours was pulsing, i'm not sure it's supposed to do that?
In the video it started rotating after you cleaned the nozzles a little better. But was there any other problem? I mean what other corrections you made?
Conceptually your video was good although you didn't really fix the pulsing problem, and you should have washed the jets out when you 1st had them off, personally id have blown through the rotator arm by connecting it up to the jet washer to get rid of any dirty within it
Great tutorial, just fixed my patio cleaner which is now working perfectly again. 👍
Glad it helped
Thanks to your video my patio cleaner is working again 🙌🙌
good stuff!
Thank you, Bootsowen. All I needed to do was place a wrench on the bolt, and it literally popped free and started spinning freely. Back to work!
Good work! Keep the dream alive!
Thank you sir. Fixed my problem
Thanks mate, super quick and easy to follow, got be back up and running in no time
Glad it helped
The trick is not to over tighten the central spindle nut there needs to be a tiny gap between the jet arms and the white washers. If you got full jet pressure from the heads I recommend you to loosen the nut a bit then try it out. Just fixed mine which was not spinning.
Cheers. Must of had some grit in mine 👍🏼
Great thanks, I just fixed ours xsue
Super
thanks. Got mine out yesterday and it wouldn't spin. I didn't work out how to get the nozzles off so this was useful. What i did was take off the centre screw and put some grease on it then it started spinning but still wasn't great. I notice yours was pulsing, i'm not sure it's supposed to do that?
Yes. The pump unit in my setup is not working correctly
Pulsing due to over pressure build up because water not coming out enough
Thanks, did the trick.
Thank you.
Thanks for this BootsOwen - your tips worked for me!!
The washer should run continuously. I have the k2
Yes. But as others have mentioned it is not running right. But it works fine.
Power washer not pressuring most prob a cracked washer that’s inside motor section should black plastic or you have air running through your taps
There could be all sorts wrong with that power washer. I have tried to fix them in another video.
In the video it started rotating after you cleaned the nozzles a little better. But was there any other problem? I mean what other corrections you made?
I mean. it seems you have done nothing to correct the problem... and it corrected itself?
My recollection is that I removed a tiny piece of grit from the nozzle. In many cases taking something apart and cleaning it will repair it.
Thank you mate you saved me few quid 💷
have the same problem they dropped the extention tube in the sand 🤬🤬
Thnks it works!!!
Conceptually your video was good although you didn't really fix the pulsing problem, and you should have washed the jets out when you 1st had them off, personally id have blown through the rotator arm by connecting it up to the jet washer to get rid of any dirty within it
Well that was a waste of 8:05
Your Kärcher is damaged. Cant you hear this?
It’s beyond damaged but it still throws water!
Somethings not right with that power washer. Shouldn’t be making that noise. Should be constant
All of my power washers are dickered!
Ohmygod! You said the muck in the nozzle was "probably dog poo" and then you put your mouth up to it #vomit!!!
But you didn’t fix it...
How's that?
It was still pulsating however I think the part was fixed, just the actual washer that sounded knackered!!