I was a youngling, just learning to split wood and wouldn't you know it, I overshot the firewood and hit the handle right below the head. Grandpa saw me do it and came over to make sure I was OK, but it had started that typical split in the handle. We took it to the shop, he popped out the wedge and removed the head. We glued the split, put it in the vice, doweled it in several directions (I think 8 times total, you can see 5 of them.) The next day, it came out of the vice, trimmed and sanded, soaked the end grain in BLO while we ate lunch and re-hafted the head with a new wedge. I'm still using that axe today over 40 years later. It works.
I can't imagine how deep the sorrow can be when losing a parent at such a young age. To die in your 50s is definitely too young. But to die in your 90s can be too young also if your spirit is strong. We are all limited to life and destined for death, but with love our spirit can live on. 🕊️
So sorry to hear that, be strong for your Dad, he would want you to carry on and be happy in life...I know it`s really tough but try and remember your golden times together, those memories and feelings are yours forever. Bless you lad and I wish you the best of luck in life.
I always want to write a book as a response to videos like these. I'll sum it up to say I'm glad you're here doing what you do and taking us along for the ride. Every day on this side of the dirt is a blessing and is to be counted as such!
Greetings Brother Buckin'!....I meet a lot of people (mostly young people) who struggle with everyday life in Todays World we need to help them to develop their resilience and face lifes challenges with fortitude and optimism. Prayers for the family in this time of the loss of a loved one.🙏❤❤
Buckin you have been a gift to watch. My question is how do you evaluate a restoration project or anything else so that you are comfortable you are not likely to get in over your head? I’m asking generally but I am picking up a Jonsered 70E later today. Runs but leaks bar oil. I think that is something I can handle but I have gotten in too deep in the past. Where do you draw your lines and how do you know when to pull back? You are great. I love to watch your videos and absorb your enthusiasm for life.
Nice work. The key is to not let your timber handles get dry. Every Autumn (aka Fall) while it’s still warm and the grain is open, oil all your timber handles. Set them up in the shed, clean them, look them over, sand any splinters etc. Set up a 44 gal drum or bath to allow the oiled tools to drain, and a large tray to oil over. I use raw Linseed oil, with up to 50% turpentine. You can use straight but leaves the handle sticky, which takes time to work free. Your hands and tools will thank you.
Brand new to your channel, and I gotta say that it’s nice to see you’re sharing your experience with others. I am your age and have had many different experiences in my life, but I’m glad to hear about your experiences and learn from them also 👍🏻
bucking Billy Ray, we bought a Ford F150 with the 5.0 L gen 3 coyote, Its very nice. The main thing is getting used to the large transmission. But, sport mode shifts with a lot more authority. Tow mode keeps it in the torque range. We love ours, and I hope you enjoy yours. Safe travels sir.
100% my brother repaired a shotgun stock that was badly cracked with dowells just like that. It's stronger now probably than when it was new! Great video Sir, thanks for the content!
Hi bucking just watched this interesting video, and seeing the bunker reminded me of its construction 6 years ago this weekend and what fun we all had,
This is a beautiful handle. Well worth saving w/ a little maintenance (if it had a little, just a little, it wouldn’t have happened in the first place). Before drilling into such a sweet handle, I’d tape off the area around the cracks, taping in parallel to the cracks, then press some water resistant wood glue - marine grade urethane glues would be even better - and press it into the cracks until the crack is completely full. Wipe off any excess glue, then wrap it tight w/ tape, or clamp it. Lightly sand the area after the glue is fully dry. Now give the handle the T.L.C. You should have given it in the first place. Maintaining the tools you have is generally cheaper than buying new ones. Try to find a handle like this in your hardware store. I have (& regularly use) a 70+ year old Radial Arm Saw. If properly cared for, my grandson will be able to use it every day.
Your enthusiasm is infectious brother much love and respect from Canada eh! God bless and be safe I always get a kick out of the content like The time you were working in someone's front yard and the husband showed up that was awesome brother I laughed for days
Love the videos buddy I truly admire your advice and content still waiting on that 592 review been a 500 guy till I got one of these in my hands it’s a beast can’t wait for your input have a good day buddy god bless
Billy! Shout-out from USA state of Georgia. Me and my old timer buddy was sitting around shooting the sh** talking about his Buckin Billy Ray inspired Axe he built. You bring good vibes all over the globe! Take it easy man
If you want to stain stuff, Black Walnut trees and Tanoak trees are great, I also like using walnut oil for oiling down and finishing axe handles or any wood handle. Now go get nuts and have some fun 😀
Hey Buckin’ sorry for your loss. Be safe while on your trip. Quick question, what Watco tint do you use onyour handles? I received my first batch of four of your handles. Still waiting for the second batch of four to arrive. Got my Gullet T- shirt already too!
I do the same thing with wood gun stocks that get damaged. With practice you can repair them and cannot see the repair at all. You want too hide that crack use super glue and some of the sanding. Put the glue in and sprinkle the wood sanding over it and wipe with a rag really quickly. They will disappear.
I’ve been watching you off and on for a few years and some of your earlier videos you use the term Watka! It took me a little while to figure out you meant Watco Danish oil😂
Buckin’ the stuff you gave me with the suspenders is great! I used it on the suspenders but also on 2 pairs of boots and I still have 3 that I’d like to do. Is there any way to buy a couple of cans? I also love the smell. 😎
Two losses in our TH-cam family Wendy’s cousin and Mark’s Mom. This cancer is just brutal and to lose someone at fifty one is so sad. 10:35 Blessings to Wendy and the families. 🙏♥️
❤️🩹😔💜♻️🕊️ Got the call, lost another friend to pancreatic cancer 3 days ago... it's 7 years for me since i went into treatment for stage 4 throat cancer. Grateful for everyday. 🎶
@@jirusjirus9322 I did not know about that. Prayers for you my friend and as we know life is very precious and a gift each day we have it but nothing compared to what is to come. 🙏♥️♥️
Condolences. Dowling the handle resurrected it. Giving it a new life with an added bit of character definition. Cosmic karma. Some of us humans would benefit from a little glue and dowling to better our cracks in character.....
If you really want to show that work, you can turn your dowel out of the same wood and then align the grain when you put them in there. You'll never see that and it'll be skookum as frig!
Always late to the show. Ever use glue and water and dust from sander. Love your self sir for your loss. My step dad passed quick from cancer. They said years it was weeks!
I was a youngling, just learning to split wood and wouldn't you know it, I overshot the firewood and hit the handle right below the head. Grandpa saw me do it and came over to make sure I was OK, but it had started that typical split in the handle. We took it to the shop, he popped out the wedge and removed the head. We glued the split, put it in the vice, doweled it in several directions (I think 8 times total, you can see 5 of them.) The next day, it came out of the vice, trimmed and sanded, soaked the end grain in BLO while we ate lunch and re-hafted the head with a new wedge. I'm still using that axe today over 40 years later. It works.
Welcome to the buckin army 🪖
Spread the love
Increase the peace
✌️❤️🌲🪵🪓🐝
I loved reading this!
Thank you for simplifying things for us. No need to over complicate these things. You’re a good man.
My father passed away of cancer 32 years ago and he was 51. I was only 22 and there hasn’t been a day I haven’t thought of him.
I can't imagine how deep the sorrow can be when losing a parent at such a young age.
To die in your 50s is definitely too young. But to die in your 90s can be too young also if your spirit is strong.
We are all limited to life and destined for death, but with love our spirit can live on. 🕊️
Ok AND?? Who asked 🤔
So sorry to hear that, be strong for your Dad, he would want you to carry on and be happy in life...I know it`s really tough but try and remember your golden times together, those memories and feelings are yours forever. Bless you lad and I wish you the best of luck in life.
Thank you Billy. Praying for the family and all affected by the loss of a loved one.
Looking forward to the report on the new trucks maiden voyage!
I always want to write a book as a response to videos like these. I'll sum it up to say I'm glad you're here doing what you do and taking us along for the ride.
Every day on this side of the dirt is a blessing and is to be counted as such!
Good man Sage
As always I love your positive outlook in life, the world needs more people like you.
Love that dowel trick. Never stop never stoppin’! Survivors baby!
Sorry for your loss. Enjoy it while you got it!
Absolutely buzzin' just home and found a package from bbr 🍻 thanks again to everyone involved 👍🏼 love from the UK 🇬🇧 ❤️ 🪓
Our pleasure!
Genuinely made my day 🙏🏻🙏🏻❤️🇬🇧🪓
What an awesome idea Buckin! I have replaced so many handles that I could have dowled! Thank you Buckin!🤩🤩 You & your wife have a wonderful tri!p!🤩🤩
Greetings Brother Buckin'!....I meet a lot of people (mostly young people) who struggle with everyday life in Todays World we need to help them to develop their resilience and face lifes challenges with fortitude and optimism. Prayers for the family in this time of the loss of a loved one.🙏❤❤
Buckin you have been a gift to watch.
My question is how do you evaluate a restoration project or anything else so that you are comfortable you are not likely to get in over your head?
I’m asking generally but I am picking up a Jonsered 70E later today. Runs but leaks bar oil. I think that is something I can handle but I have gotten in too deep in the past. Where do you draw your lines and how do you know when to pull back?
You are great. I love to watch your videos and absorb your enthusiasm for life.
Sorry about your family's loss buckin and Wendy, sending prayers
Thanks for the Tips Billy , always appreciate .God Bless you and family take care .None of us are getting any younger.
So for y’all’s lost . Praying for you and your family. GOD bless y’all and safe travels
Awesome tip Buckin thank you so much give Wendy my best.
If you think you have it bad, the next person has it worse be grateful.
Thoughts and prayers for everyone.
Blessings from Montana!
Nice work.
The key is to not let your timber handles get dry.
Every Autumn (aka Fall) while it’s still warm and the grain is open, oil all your timber handles.
Set them up in the shed, clean them, look them over, sand any splinters etc. Set up a 44 gal drum or bath to allow the oiled tools to drain, and a large tray to oil over.
I use raw Linseed oil, with up to 50% turpentine. You can use straight but leaves the handle sticky, which takes time to work free.
Your hands and tools will thank you.
Brand new to your channel, and I gotta say that it’s nice to see you’re sharing your experience with others. I am your age and have had many different experiences in my life, but I’m glad to hear about your experiences and learn from them also 👍🏻
Welcome to the buckin army 🪖
Spread the love
Increase the peace
✌️❤️🌲🪵🪓🐝
Thanks and welcome
Love to you and your family with the sad loss , god bless.
Condolences to you and your family Buckin. Love the tip for the handle! Thanks for the video Buckin!
Hello from KY everyone! Hope all is well.... Thx Billy Ray
Thanks for the last words they resonate pretty deeply
Welcome friend
bucking Billy Ray, we bought a Ford F150 with the 5.0 L gen 3 coyote, Its very nice. The main thing is getting used to the large transmission. But, sport mode shifts with a lot more authority. Tow mode keeps it in the torque range. We love ours, and I hope you enjoy yours. Safe travels sir.
GREAT VID! EVEN GREATER MESSAGE AND REMINDER AT THE END!! THANK YOU BILLY!!!
Sorry to hear of your loss. My condolences friend🙏
100% my brother repaired a shotgun stock that was badly cracked with dowells just like that. It's stronger now probably than when it was new! Great video Sir, thanks for the content!
You bet thx fir bein’ here
Hi bucking
just watched this interesting video, and seeing the bunker reminded me of its construction 6 years ago this weekend and what fun we all had,
Hey buddy
Sorry for the loss 😢take care love the videos.
Prayers and blessings to Wendy's family.
Prayers for Wendy and her family 🙏🙏🙏
Love you all...❤❤❤
Lieutenant Bradley
This is a beautiful handle. Well worth saving w/ a little maintenance (if it had a little, just a little, it wouldn’t have happened in the first place). Before drilling into such a sweet handle, I’d tape off the area around the cracks, taping in parallel to the cracks, then press some water resistant wood glue - marine grade urethane glues would be even better - and press it into the cracks until the crack is completely full. Wipe off any excess glue, then wrap it tight w/ tape, or clamp it. Lightly sand the area after the glue is fully dry. Now give the handle the T.L.C. You should have given it in the first place. Maintaining the tools you have is generally cheaper than buying new ones. Try to find a handle like this in your hardware store. I have (& regularly use) a 70+ year old Radial Arm Saw. If properly cared for, my grandson will be able to use it every day.
Your enthusiasm is infectious brother much love and respect from Canada eh! God bless and be safe I always get a kick out of the content like The time you were working in someone's front yard and the husband showed up that was awesome brother I laughed for days
I watch your videos all the time
Bless you. May you have a wonderful day.
My heart felt condolences out to your families love and prayers. Safe travels Buckin
Thank you for the video thank you for the words spoken sometimes we need to be reminded! Sorry to hear about your family member
✌️❤️🌲🪵🪓🐝
Who knows how to pour from a can w/o dribbling it all over the can (?) . ☆
Thank you for the Tip Sir.
Ca glue, aka super glue, will seep into the crack and fill it in. Then sand it smooth and if it really bad put the dowl in it. Then soak it in an oil.
Thanks Buckin! Safe travels to you!
Thanks so much
Love the videos buddy I truly admire your advice and content still waiting on that 592 review been a 500 guy till I got one of these in my hands it’s a beast can’t wait for your input have a good day buddy god bless
Bro, You are amazing ! Thanks for all the knowledge you share.
Poštovanje tebi i tvojoj porodici i puno sreće nastavi dalje sa radom pozdravlja te jednoruki drvoseča,,,,,pripravnik🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😊😊😊😊
sorry for your loss!
❤Love the video and you sharing how to fix the handle so your not having to throw it out
Yeh, cancer sucks. Got my wife with lung cancer almost seventeen years ago at age 47. My condolences and God Bless
You just got a sub man that message at the end really hit home for me
Welcome to the buckin army 🪖
Spread the love
Increase the peace
✌️❤️🌲🪵🪓🐝
Billy! Shout-out from USA state of Georgia.
Me and my old timer buddy was sitting around shooting the sh** talking about his Buckin Billy Ray inspired Axe he built. You bring good vibes all over the globe! Take it easy man
Thx for sharing this friend
Would it have been better to put the dowels in before the oil was applied?
Wow, cool trick with the dowelings. I need to file that away in the old head for when the time arises. Thanks, Buckin’.
Just love your intro music
Thx
Thanks Billy
Friend that is just crazy, I'm telling you crazy man. Wow, drill a hole and put a loose dowel in it. Just crazy man.
generally dont oil or put finish on before you glue up ....
peace
Amazing, not the handle fix, the speech at the end. Love ya man , and thanks !,,
Glad it helped
Turbo cancer is going around,sorry for your loss.
This is a good repair that will work, can work on old wood gunstocks as well and yes a waterproof glue like titebond lll is warranted.
The handle was improperly dried. If you paid more than $2 you were taken.
What is the length of the handle on the axe you carry on your belt and what’s the weight of the head?
Could have just put thin superglue in those cracks and then squeezed it and hit it with accelerator. Boom! 5 minute fix and probably stronger.
Have a shot every time he says "friends"
If you want to stain stuff, Black Walnut trees and Tanoak trees are great, I also like using walnut oil for oiling down and finishing axe handles or any wood handle.
Now go get nuts and have some fun 😀
Very sorry to hear of death in your family my deepest condolences. Great idea for fixing handle much enjoyed!!
hi there real good idea , thank you john,
Easy to get dowels for that. Most grocery stores have the packers of bamboo skuers in the picnic isle.
Thank you 🙏🏻
Soak your wood in anti freeze Won’t evaporate like water then polish it up to your liking 🧐
The Glasses make Billy look even smarter than he all ready is.🥸
Buckin' Billy Ray Smith. 👍👍👍👍
Slim hello 👋
Have a peaceful weekend
✌️❤️🌲🪵🪓🐝
@@MATT.MAN-PEACE-LOVE Hello Sir, thank you and I hope the same for you.
@@Slim..thanks buddy
✌️❤️🌲🪵🪓🐝
Hey Buckin’ sorry for your loss. Be safe while on your trip. Quick question, what Watco tint do you use onyour handles? I received my first batch of four of your handles. Still waiting for the second batch of four to arrive. Got my Gullet T- shirt already too!
Glad you like the handles. I mix natural with dark walnut
I do the same thing with wood gun stocks that get damaged. With practice you can repair them and cannot see the repair at all.
You want too hide that crack use super glue and some of the sanding. Put the glue in and sprinkle the wood sanding over it and wipe with a rag really quickly. They will disappear.
I really enjoy these episodes sir . Received my BBR axe handle and T shirt today, thank you! the T has been claimed by my son and thats okay
Glad you like them!
Making a handle out of Oregon Mountain White Oak. I have a nice piece with straight grain. The tree came from 4750 feet on Mt. Ashland.
Thanks Buckin , I’ll dowel the next time i break one instead of replacing it 👍
I’ve been watching you off and on for a few years and some of your earlier videos you use the term Watka! It took me a little while to figure out you meant Watco Danish oil😂
Buckin’ the stuff you gave me with the suspenders is great!
I used it on the suspenders but also on 2 pairs of boots and I still have 3 that I’d like to do.
Is there any way to buy a couple of cans?
I also love the smell. 😎
We are collecting data right now so thanks for this.. stay tuned brother and thx 🙏
@@BuckinBillyRaySmith ok thanks, I’ll keep eyes and ears open for that.
My condolences to you and your family.
✌️ peace out
JM Leblanc
Sorry to hear that brother prayers for you and your family
Hey buckin baseball cap arrived today fella really love the leather buckin billy ray logo❤
Awesome buddy .. love that you got one .. thx
Why not dowel it and drop glue into the whole crack before oiling it to let the glue really work everywhere?
Hey Billy, I need some help with a double bit maker's mark.
Two losses in our TH-cam family Wendy’s cousin and Mark’s Mom. This cancer is just brutal and to lose someone at fifty one is so sad. 10:35 Blessings to Wendy and the families. 🙏♥️
❤️🩹😔💜♻️🕊️
Got the call, lost another friend to pancreatic cancer 3 days ago... it's 7 years for me since i went into treatment for stage 4 throat cancer.
Grateful for everyday. 🎶
@@jirusjirus9322 I did not know about that. Prayers for you my friend and as we know life is very precious and a gift each day we have it but nothing compared to what is to come. 🙏♥️♥️
Condolences.
Dowling the handle resurrected it. Giving it a new life with an added bit of character definition.
Cosmic karma.
Some of us humans would benefit from a little glue and dowling to better our cracks in character.....
Condolences to you and your family,love ya❤
An ounce of prevention is worth a pound of cure.
Amen 🙏 god bless
If you really want to show that work, you can turn your dowel out of the same wood and then align the grain when you put them in there. You'll never see that and it'll be skookum as frig!
Sorry for your family’s loss buckin.
Danish oil has linseed oil in it along with nut seed oils.
Always late to the show. Ever use glue and water and dust from sander. Love your self sir for your loss. My step dad passed quick from cancer. They said years it was weeks!
Good Friday army
Critter 💪 have a peaceful weekend buddy
✌️❤️🌲🪵🪓🐝
Critter
I know how you feel brother. Peace be unto you my friend.
Good Gawd Billy-Bob
Sorry for your family's loss, brother.
Sorry to hear of your misfortune. Please tell your wife my prayers are with her. Bless you both Buckin.
Wood glue is nuts it’s like welding for wood.
Love ya , but you should of glued it before the oil was put on.
I feel kind of silly now. I cracked a handle on my last axe and just sawed it off and threw it away. I guess I never considered it could be repaired.
Buckin billy ray how are you doing today
Some Bowties would look cool instead of Dowels...
Billy ,I enjoy your videos, but don’t you think you’re overdoing the Guy Liner in this one? It’s distracting.