Very innovative build. I'm glad you explained why there was a belt and chain drive system. I wonder if you can add 80- 100 kg steering servo to the front so you can steer it with the transmitter while not riding the board.
i like how you described why a 34 inch drive axle needs a differential, lol. but, there is another way....i'm in the works on my own extra wide long board (street) and i found sprag clutch bearings that fit into my wheel hubs.
You will have problems with sprague clutches. When you throttle, the inside rear wheel will drive as much as the outside rear wheel and it will make the axle oversteer and bind. You will need to coast around corners for the sprague clutches to work. Trust me, if there were any way around using differentials, I would have gone that route. One other major problem with sprague clutches is braking. You will have no brakes.
@@AG.Floats I agree, but on skateboards you can have Bindings with no heel straps that you can slip out of if you need to bail. It gives extra control over the board in conjunction with grip tape, especially over rough ground
What a fantastic creation. You have put so much thought and effort into it. Looks like a lot of fun. All you are missing is some grip tape so you dont slip off . Keep inventing!
wow, nice to find your project on youtube dude!. i actually have your ES build page for this bookmarked on my work PC and i used to check it from time to time in the lunch hour for updates on the build... nice to see a vid of the finished board!
@@TechForumTesla HEY LAD . I NEED LIL ADVICE HERE ON ESCs AND VESCs . WELL I ORDERED 4600W 4x MOTORS AND I HEARD TO REACH THE MAXIMUM POWER I NEED SUPPLY THEM WITH 48V ........ WELL IS THERE ANY WAY I CAN FUK THE PEDAL TO HEAT THEM UP TO MAX WITH 22V-28V ??? BIG THANK YOU
the differential lookscloke the one northern tool sells and the one they used on TRI SPORT, ALSPORT, 3 wheeler, madexin mid 70s I put a 350 Honda on one BACK in 1974, I've found 2 since then, a ELECTRIC version would be crazy...GREAT BUILD....very talented man you are and access to some tools
I would make the width of the feet plate a little smaller than my shoes when they are on my riding stance. I'd put snowboard straps to be able to ride it way more aggressively.
Nice Matt you killing them Trampa and Baja boards which are the top of the line but again this is a custom build like always I see you still using them CC 160hv successfully I'm so happy we have the new Benjamin Vedder ESC,s or VESC for our rc propulsion systems 🤓
Wow. That’s an impressive build! I’m surprised you’ve never heard of a 4WD off road skateboard considering how much time you’ve put into this build. Check out the Baja Board G4X. 😊👍🏼
I know all about threw baja board. That board is a completely different design, though. I was talking about full axle steering skateboard style vehicle. The baha board is an independent suspension board that is completely different in design.
Great Job👍🏼that thing is cool. I wish i had garage to tinker and create stuff. I have a bunch of innovative ideas and no where to build them. I love stuff like this.
Awesome build,looks sick! Can’t help but wonder.... What would you think if you could steer the board with the steering wheel. Could probably use some 5 scale servos and what have you... You would definitely kno more About this idea then I do. And I’m sure you’d have to fabricate a bunch of other stuff, but why not... a steering set up similar to rc?? Just a thought
Very impressive. Do you know of other guys making similar contraptions? Looks like a great candidate for an X-game competition way to break bones. You're probably a little old to be competitive, ;-) I'm an engineer and very intrigued by the suspension/steering system, not to mention the motor/gear reduction system, well, the whole thing. Well done!
I make odd devices. Not very many people do what I do. I have built around 20 vehicles of varying types. 12 have sold to clients. The rest I still have.
Holy shit that's what iv been dreaming of lol it's funny how like minds align.. much better than my design but I'm just a dreamer also when are you going to put traxon this alibaba has them for go carts very cheap! Please keep me posted im subscribe 4 sure!
So..... please tell me you’re considering making and selling these... also. Would you like to make one to handle 300 pounds. I weight 275. And with video equipment and r3 cars being carried. Just say 300 pounds. Also. I can totally see us making a sport rock climbing these bad ass rides! Could you imagine that as a “sport”! I can, haha! Also. What about putting underneath the board a 25-50 watt or more solar panel. That way. When you’re out in about. You flip it over and allow the sun shine to charge the batteries. Also, regen braking would also be awesome! Dude! All I see is money money money! Let’s do this!
I have two clients that have offered me $7,500 for it. The issue is, I have about $2,000 spent on it and about 150 to 200 hours of labor building it. Nearly every part was custom made.
Hey, we love this video! Just messaging to ask if we could post this video natively on our Facebook? (facebook.com/Extreme/) We would need to cut it shorter to you riding the board! However you will be fully credited! Thanks
Very innovative build. I'm glad you explained why there was a belt and chain drive system. I wonder if you can add 80- 100 kg steering servo to the front so you can steer it with the transmitter while not riding the board.
Absolutely insane ! A complete masterpiece. Would love to take it for a test drive. Great work
i like how you described why a 34 inch drive axle needs a differential, lol. but, there is another way....i'm in the works on my own extra wide long board (street) and i found sprag clutch bearings that fit into my wheel hubs.
You will have problems with sprague clutches. When you throttle, the inside rear wheel will drive as much as the outside rear wheel and it will make the axle oversteer and bind. You will need to coast around corners for the sprague clutches to work.
Trust me, if there were any way around using differentials, I would have gone that route.
One other major problem with sprague clutches is braking. You will have no brakes.
Deck grip tape, or even better boot mounts like on a snow board. Looks like tons of fun
I'd hate too crash on anything on hard group while locked into the board lol...
@@AG.Floats I agree, but on skateboards you can have Bindings with no heel straps that you can slip out of if you need to bail. It gives extra control over the board in conjunction with grip tape, especially over rough ground
You could build a small frame that attaches to it that would support a rug. Presto, you got a magic carpet ride!
What a fantastic creation. You have put so much thought and effort into it. Looks like a lot of fun. All you are missing is some grip tape so you dont slip off . Keep inventing!
Grip tape just showed up in the mail yesterday. 😁
wow, nice to find your project on youtube dude!. i actually have your ES build page for this bookmarked on my work PC and i used to check it from time to time in the lunch hour for updates on the build... nice to see a vid of the finished board!
ur board is extremly awesome👍👍👍
This looks like something built by NASA! You get the kind of praise they'd use here: "You're a steely-eyed missile man!"
Fantastic work! This is awesome! I love the suspension and ability to turn without hitting itself as it carves at speed
th-cam.com/video/bxsRjKP_rpY/w-d-xo.html
Here is another video.
@@TechForumTesla HEY LAD . I NEED LIL ADVICE HERE ON ESCs AND VESCs . WELL I ORDERED 4600W 4x MOTORS AND I HEARD TO REACH THE MAXIMUM POWER I NEED SUPPLY THEM WITH 48V ........ WELL IS THERE ANY WAY I CAN FUK THE PEDAL TO HEAT THEM UP TO MAX WITH 22V-28V ??? BIG THANK YOU
Nice job... Beautiful work
the differential lookscloke the one northern tool sells and the one they used on TRI SPORT, ALSPORT, 3 wheeler, madexin mid 70s
I put a 350 Honda on one BACK in 1974, I've found 2 since then, a ELECTRIC version would be crazy...GREAT BUILD....very talented
man you are and access to some tools
I would make the width of the feet plate a little smaller than my shoes when they are on my riding stance. I'd put snowboard straps to be able to ride it way more aggressively.
Nice Matt you killing them Trampa and Baja boards which are the top of the line but again this is a custom build like always I see you still using them CC 160hv successfully I'm so happy we have the new Benjamin Vedder ESC,s or VESC for our rc propulsion systems 🤓
What a good video. Well explained and well engineered! Keep it up - you have earned my subscription :)
Wow. That’s an impressive build! I’m surprised you’ve never heard of a 4WD off road skateboard considering how much time you’ve put into this build. Check out the Baja Board G4X. 😊👍🏼
I know all about threw baja board. That board is a completely different design, though. I was talking about full axle steering skateboard style vehicle. The baha board is an independent suspension board that is completely different in design.
Great Job👍🏼that thing is cool. I wish i had garage to tinker and create stuff. I have a bunch of innovative ideas and no where to build them. I love stuff like this.
That qualifies for a seat. Great engineering.
This is the greatest thing I have ever seen.
Awesome build,looks sick!
Can’t help but wonder....
What would you think if you could steer the board with the steering wheel. Could probably use some 5 scale servos and what have you... You would definitely kno more
About this idea then I do.
And I’m sure you’d have to fabricate a bunch of other stuff, but why not... a steering set up similar to rc?? Just a thought
Ok, now you got me wanting this thing:) Great job...
I hope you patented that thing before you posted this video!! U must be an engineer!!! What an amazing build!!
Not the fastest or most practical electric skateboard build, but for sure the most impressive.
Love your work Matt!
I had NO idea it was that huge! I thought it was slightly larger than a regular all terrain skateboard! 😲
Nice man looks beast
That is awesome. Thanks for sharing.
Long ago I thought it would be neat to get a non-electric mountain board which is basically the same thing but probably half the size.
Vary cool, I like your work, it would be grate to see your shop.
Very impressive. Do you know of other guys making similar contraptions? Looks like a great candidate for an X-game competition way to break bones. You're probably a little old to be competitive, ;-) I'm an engineer and very intrigued by the suspension/steering system, not to mention the motor/gear reduction system, well, the whole thing. Well done!
I make odd devices. Not very many people do what I do.
I have built around 20 vehicles of varying types. 12 have sold to clients. The rest I still have.
Holy shit that's what iv been dreaming of lol it's funny how like minds align.. much better than my design but I'm just a dreamer also when are you going to put traxon this alibaba has them for go carts very cheap! Please keep me posted im subscribe 4 sure!
Wow, very cool!
Nice work
You need to get in touch with Casey Neistat. That board is amazing man!
Great work! Curious, what would you have to do to make the motors quieter?
Part of that sounds are the motors and part of it is the toothed belts.
It is pretty quiet in person. The camera amplifies the sound.
Why did you choose castle creation there are plenty of e board esc's out there?
Useability and programability
I want one I need one how much is one
How much would you sell something like this for, this is really great?
I have a standing offer for $7,500 for it.
i am in love!!!!!
With your skills you should have built your own Tesla
I'd get arrested in seconds if I took it out to the streets. The police can't handle this much cool where I live
Impressive.
Where did you get that pulley wheel? ( The one with holes in it)
I have them machined to my specifications at a local machine shop.
@@TechForumTesla Really, I just I've seen them before on an ebike?
@@adslammer1359 yup, my ebikes. I manufacture ebike drive units and compete bikes.
@@TechForumTesla wow, cool; i've seen photos but didn't know that was you!
No grip tape?
I just put on the grip tape yesterday. 😁👍
Great!
Bonkers
Can I buy this?
$7,500
So..... please tell me you’re considering making and selling these... also. Would you like to make one to handle 300 pounds. I weight 275. And with video equipment and r3 cars being carried. Just say 300 pounds. Also. I can totally see us making a sport rock climbing these bad ass rides! Could you imagine that as a “sport”! I can, haha! Also. What about putting underneath the board a 25-50 watt or more solar panel. That way. When you’re out in about. You flip it over and allow the sun shine to charge the batteries. Also, regen braking would also be awesome! Dude! All I see is money money money! Let’s do this!
I have two clients that have offered me $7,500 for it.
The issue is, I have about $2,000 spent on it and about 150 to 200 hours of labor building it. Nearly every part was custom made.
Id pay 7500 for the first board ;) guess id have to donate my time fabricating it cause i don't have that just sitting
@ Tech Forum could you DM me got a question for you.
Wow
Hey, we love this video! Just messaging to ask if we could post this video natively on our Facebook? (facebook.com/Extreme/) We would need to cut it shorter to you riding the board! However you will be fully credited! Thanks