Lookin great! I’m getting ready to redo the floor of my tag trailer, not real excited about grinding all the screws off but it’s got to be done. Thanks for sharing!
I feel your pain on getting the old bolts out and fixing the angle iron structure. . That's 90% of the job. I done 1 for a customer he spent big money on treated 6/4 tounge and grove for the decking. It looked awesome when I got done But I said a lot of ugly words grinding those big self tappers out and repairing structure. Good luck. And I enjoy watching your vajahoes.
Trail king uses appleton wood. Had to pre-drill all the screw holes too. Super hard wood. I was a welder there, but would help out in final/wood deckin when i wanted more than our usual 48 hour week. We never ship lapped them either.
I'm elbow deep in our low boy too. Except I had to replace all the cross members. In the process of blasting and priming it now but you probably watch my videos so you already know this... Lol.
Looks good Wade,its amazing to me how that wood decking just doesn't desintergrate under the 40,000 pounds of dead weight of the din-din.I know that steel frame takes the punch,but still.
hey tater to bad you don't know anyone with a sawmill to get yer planks looks good brothercut ! lol funny we just fixed up our 3 axle , looks good, say hi to the folks & mommy &the boys !
That is FAS quality wood you have for decking. Second and third log wood will serve just as well. Sell or trade the FAs and get more low grade logs to cut the decking
Shoot Tater tour going all the way! Ive never seen the deck routered like that to be tight, should work good. Helps having a Mill i guess. That trailer learned today!
I have a 48 ft RGN trailer 29 wheel surface I have a top deck surface of 9 ft and I got a back surface how much do you charge I need the whole thing redone the floor
Lookin great! I’m getting ready to redo the floor of my tag trailer, not real excited about grinding all the screws off but it’s got to be done. Thanks for sharing!
I feel your pain on getting the old bolts out and fixing the angle iron structure. .
That's 90% of the job.
I done 1 for a customer he spent big money on treated 6/4 tounge and grove for the decking.
It looked awesome when I got done
But I said a lot of ugly words grinding those big self tappers out and repairing structure.
Good luck. And I enjoy watching your vajahoes.
Somebody explain please? What does Wade mean when he says 'live sawed?' Does it mean the log hasn't been aged at all?
I have a 48 ft Fontaine RGN trailer 2013 how much would it cost me for you guys to do the 29 foot well to 10 ft top deck in the deck in the back
I go thru decking like poop thru a goose, all I can get here is doug fir, what is the best wood for a lowboy Wade?
white oak j ! been checkin yer vids great !
Trail king uses appleton wood. Had to pre-drill all the screw holes too. Super hard wood. I was a welder there, but would help out in final/wood deckin when i wanted more than our usual 48 hour week. We never ship lapped them either.
Boys I’m all about the white oak
Logger Wade hey man if it works it works right.
Where is your shop located?
How you cut it? What kind of blade is that
Hi Wade! Sorry I'm late to the party! Those Tek screws are the only way to do a trailer deck.
I'm elbow deep in our low boy too. Except I had to replace all the cross members. In the process of blasting and priming it now but you probably watch my videos so you already know this... Lol.
You had better be watching his videos WADE !!!!!!!!!!!!
axecut timber b
Boys I’m sorry I haven’t been up on them I’ll check it out
Looks good Wade,its amazing to me how that wood decking just doesn't desintergrate under the 40,000 pounds of dead weight of the din-din.I know that steel frame takes the punch,but still.
wood had a compression weight around 100 tons before they squish so, if properly supported the wood isnt going to budge
Quite the project...Can't wait to see it finished!
Where are you where you guys located
Southern indiana
You got her coming around Mr Wade. It will be nice when it's done.
Great vidja Wade. ThAt ain’t no small job. Hell of a lot of holes to drill.
hey tater to bad you don't know anyone with a sawmill to get yer planks looks good brothercut ! lol funny we just fixed up our 3 axle , looks good, say hi to the folks & mommy &the boys !
We just replaced the deck on our lowboy. Nice to see we aren’t the only one lol. Getting the bolts out is definitely the worst.
Dodo blade. Proof loggers aren't carpenters.
That is FAS quality wood you have for decking. Second and third log wood will serve just as well. Sell or trade the FAs and get more low grade logs to cut the decking
Looking good. 😎👍👍
hard to find good wood for trailers. you have a sawmill near you that could help with that stuff? :D
locust works good on them decks like that
you should try some apitong. way stronger than oak and lasts longer.
Gonna look great once the wood is on
I thought we worked late and finished this job.
Shoot Tater tour going all the way! Ive never seen the deck routered like that to be tight, should work good. Helps having a Mill i guess. That trailer learned today!
Nice t&g decking looks good
good vidja Wade
Good vidja new decking should look good
Soooo. We are doing this backwards. Or. What?
can you do a video about the forklifts plz
Y'all look hotter than a peppers pouch‼️‼️ Don't know how you stand that heat and humidity😜😜😜‼️
Check out Officer Hoovers Load Securement vidja on his DOT FaceBook .
good vidja!
Weld 1/4 x2 flat bar on the cross members and screw to that
Feel like I'm going azz backards after watching the livestream Hahahaha
Oil that stuff down son!
big project
Go look at how cottomtop finished his trailer boards. Do the same and it will last a long time
Doing one today lucky me
Do you have an email address I can send you pictures of my trailer
Yes loggerwade.com
I have a 48 ft RGN trailer 29 wheel surface I have a top deck surface of 9 ft and I got a back surface how much do you charge I need the whole thing redone the floor