No bad, I tried it out but it Only does cladding alignment , for the price you are better off with a Japanese or Korean fusion splicer that does both Core and Cladding alignment.
The EasySplicer is nice. But in several Place´s this will not work today (Only 2 motor) You need a Core Splicer that make the core aligne in the end! (6 motor) Hope that you look fore the Core splicer in the future. Active Clad splicer /4 motors. This everybody will use in a near future. (I think) Core ore Active Clad splicer (6 - 4 motors) Not 2 motors that EasySplicer use today. Ribbon fiber is the future: R4 and R8 in Sweden: The world use all R fibers! R2 / R4/ R6/ R8/ R10 /R12,* I have seen R24 in the future. But in the world there is R12 Normaly R12 UPC Multimode OM3 Some time R12 Multimode OM4 APC and UPC . DataCenter. Then you have to use Ilsintech, Fujikura/ Sumitomo, Furukawa( FITEL) splicers.
Mr Andersson, we recommend to use EasySplicer in non-critical instalations like LAN or CCTV fiber conncections. Everytime installation has many splices in optical way or will be used by operator for example for PON technoplogy we suggest to use more advanced splicers like those You mention. As our customers starts to work with more and more complex installation we about to introduce new type of more advanced splicer. Not sure which one it will be yet. Regarding Ribbeon - in Poland, where we mostly operate, it is not popular at all. Could You tell more about this? Which installation in Sweden use ribbon type fiber optics cables?| Regards DIPOL Team
Mr Riley, we (in most cases) do not add any voice for 2 reasons: 1)We translate those movies into 6 languages, 2)The guy making and hosting the videos has horrible voice ;) Regards DIPOL Team
Here is the problem with EasySplicer: th-cam.com/video/qTrss2cC9oQ/w-d-xo.html Can not make a normal FTTx splice. And if you use Multimod fiber OM1 - OM4 maby OM5 in the future* You can NOT use EasySplice. This is only for Singelmod fiber in a Clean workplace.* Clean products (Fiber/ holders/ Lense/ V-Groove/ Cutter/ and more !
Mr Andersson, the problem from the movie is typical problem with dirt in v-groove. As splier has only 2 motors and cannot position fibers in vertical position automatically, we need to care about keeping v-groove cleaning. The man on movie tries to clean them several times, but he does this a little wrong way. The best way to this is put fibers like for splicing, put the fiber clamp down and then just take fiber holders and move them right and left gently. Thats its. This way helps in 9 per 10 situations and last 10 seconds. If dirt sticks to the v-groove then you can use razor blade to get it out and then fibers like descibed. Regarding OM fibers we do not see any reason why You cannot use EasySplicer - You can. You just need to be carefull while splicing different standards like OM1 and OM2 because of the different core size or OM2 with OM3 or 4 because of different chemical structure of fiber. EasySplicer will splice it, but You always need to check splice attenuation using a meter. Connecting same standards is not so dangerous. If by "Multimode" you meant "Ribbon OM" of course You are right, but Ribbon is Ribbon, OM is OM. Regards DIPOL Team
This product is no logner in our offer. We have much better splicer in our offer. Please check out our website: www.dipolnet.com/l5870.htm Regards DIPOL team
No bad, I tried it out but it Only does cladding alignment , for the price you are better off with a Japanese or Korean
fusion splicer that does both Core and Cladding alignment.
You can not find a Japanese or Korean splicer at the same price with core alignment.
have you a model to suggest? thanks
Christopher Goss can you please tell me this splicer's price. thank you
you can try our Easiest Core-Aligning Fusion Splicer, Stable, Reliable, Affordable
The EasySplicer is nice.
But in several Place´s this will not work today (Only 2 motor)
You need a Core Splicer that make the core aligne in the end! (6 motor)
Hope that you look fore the Core splicer in the future.
Active Clad splicer /4 motors.
This everybody will use in a near future. (I think)
Core ore Active Clad splicer (6 - 4 motors)
Not 2 motors that EasySplicer use today.
Ribbon fiber is the future:
R4 and R8 in Sweden:
The world use all R fibers!
R2 / R4/ R6/ R8/ R10 /R12,*
I have seen R24 in the future.
But in the world there is R12
Normaly R12 UPC Multimode OM3
Some time R12 Multimode OM4
APC and UPC . DataCenter.
Then you have to use Ilsintech, Fujikura/ Sumitomo, Furukawa( FITEL) splicers.
That is not true at all, if a core alignement splicer works, the EasySplicer also works.
Have you used a fiber that don´t have the fiber in center.
Then you got problems.
Mr Andersson,
we recommend to use EasySplicer in non-critical instalations like
LAN or CCTV fiber conncections. Everytime installation has many
splices in optical way or will be used by operator for example for
PON technoplogy we suggest to use more advanced splicers like those
You mention. As our customers starts to work with more and more
complex installation we about to introduce new type of more advanced
splicer. Not sure which one it will be yet.
Regarding Ribbeon - in Poland, where we mostly operate,
it is not popular at all. Could You tell more about this? Which installation
in Sweden use ribbon type fiber optics cables?|
Regards
DIPOL Team
I have ilsintech K11 And it is damn good. Cant imagine i would ever use chinese splicer.
Please add voice over to your videos.
Mr Riley,
we (in most cases) do not add any voice for 2 reasons:
1)We translate those movies into 6 languages,
2)The guy making and hosting the videos has horrible voice ;)
Regards
DIPOL Team
@@dipolen lol that's pretty funny. Has a horrible voice like Chewbacca haha
How i can get this splicing machine?
where is it made from and how much
This machine can be found in Bangladesh. where can be found if available and its value will be Bangladesh.
We have some pcs of refurbished and checked splicer ready to ship. contacto at topcomponents dot es
Will it work with 170um fiber core?
dipolin easy splicer what is price??
How is the device so small? This cant be good
0.03 no problem ? Some body say better with 0.01 ?
the less the better ;)
Iska price Kya h boss
Available in India
Here is the problem with EasySplicer:
th-cam.com/video/qTrss2cC9oQ/w-d-xo.html
Can not make a normal FTTx splice.
And if you use Multimod fiber OM1 - OM4 maby OM5 in the future*
You can NOT use EasySplice.
This is only for Singelmod fiber in a Clean workplace.*
Clean products (Fiber/ holders/ Lense/ V-Groove/ Cutter/ and more !
Mr Andersson,
the problem from the movie is typical problem
with dirt in v-groove. As splier has only 2 motors and cannot position fibers
in vertical position automatically, we need to care about keeping v-groove
cleaning. The man on movie tries to clean them several times, but he does this
a little wrong way. The best way to this is put fibers like for splicing, put
the fiber clamp down and then just take fiber holders and move them right and
left gently. Thats its. This way helps in 9 per 10 situations and last 10 seconds.
If dirt sticks to the v-groove then you can use razor blade to get it out and
then fibers like descibed.
Regarding OM fibers
we do not see any reason why You cannot use EasySplicer - You can. You just need
to be carefull while splicing different standards like OM1 and OM2 because of
the different core size or OM2 with OM3 or 4 because of different chemical
structure of fiber. EasySplicer will splice it, but You always need to check
splice attenuation using a meter. Connecting same standards is not so dangerous.
If by "Multimode" you meant "Ribbon OM" of course You are
right, but Ribbon is Ribbon, OM is OM.
Regards
DIPOL Team
U need 1 order and 1 splicer chiep for one school I have in Haiti cap Haitian
What is price
Can this unit splice 12 fiber ribbons?
It cannot. The unit is not created for ribbon type cables.
Regards
DIPOL TEAM
BwahahahahahahA fuxk no
How much tak is it ?
We do not sell ait anymore. We recommend our new splicer: www.dipolnet.com/L5870.htm
Splice machine,what is price
Mr Kumar,
this splicer is no longer in our offer. Please check our new splicer: www.dipolnet.com/L5870.htm
Regards
DIPOL Team
dileep kumar hi
1.25 lakh rupees only
Agar kahe splicer ke vacancy hai tho mujhe msg kare nagpur maharashtra
I bro available in india
I want to mine spilsing mioson
You want to what?
How much price
We do not sell this model anymore :(.
@@dipolen price
what's the price
Mr Ravi,
pricing and all the other info here:
www.dipolnet.com/L5810.htm
Regards
DIPOL Team
Prise?
Mr Patel,
we do not sell this product anymore. Try www.dipol.com.pl/L5870.htm
Regards
DIPOL Team
nice
Nice👍
Priz
Cost
Yes
Machine wanted
ওকে
kimt kitni he RS
HOW MANY PRICE
Hello
we do not sell this product anymore. Try www.dipolnet.com/L5875.htm
Regards
pm
Vvvvvvvvvvvvvvvvvvery Ggggggggggggoood
Priese
You mean Price?
Unfortunately, this product is no longer in our offer.
Regards
DIPOL Team
M R P?
how much price
Priz
This product is no logner in our offer. We have much better splicer in our offer. Please check out our website: www.dipolnet.com/l5870.htm
Regards
DIPOL team