Why don't you clean the exposed fiber after the final cut, considering the cutting tool table surface is obviously going to eventually get dirty or dusty?
I hope someone answer this, so u don't need that green plastic cap right to connect it to the cable in the wall? Cause we had to get a technician, and I think they replaced wire. I had to unplug it cause someone is painting the walls. After unplugging it, I notice a clear plastic cap on the floor similar to the green one on here
I work with one of the biggest telco in philippines, back then we used this type of SC connector, i can say that its really fast when it comes to splicing, but not that durable, after couple of months you need to resplice it again. Thats why we switch to Fujikura
They were not needed in that case. We've only cut a small fragment of them so they would not interfere. If one needed to add more fibers, the could strip the cable and access the remaining fibers. In fiber optic installations it is crucial to have a lot of spare cable in termination boxes.
Put on a head guard, pinch the green cover with your hands, and then hit the table top, this is the easiest way without any tools. I am from a manufacturer can provide a complete set of ftth solution and products, skype:m52099m@163.com for more details.
Hmm. If it's that simple, why weld the cable to another with a jack? Isn't this method cheaper and there is no need for expensive equipment to run on electricity?
there is some signal loss when using connectors like this using a fiber fuser gives less signal loss, so you can get more distance out of the same hardware
@@cleverca22 But what's the point if it's in an end device? This is how the signal arrives in the media converter, which converts it from an optical signal to an electronic signal, for example the router at my place. If it is spliced from one optical fiber to another it makes sense, but otherwise it doesn't sound logical, but that's what ISPs do here.
It is a series of sounds put together in a structured pattern with changes in pitch, rhythym, and tone. One or more sets of these patterns are typically called a "song."
This is the most professional video for fiber connector. Awesome!
This is my latest interest. Electrician for school district. I had to run a fiber line but couldn't terminate it. Now I want to master fiber optics.
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments.
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
Why don't you clean the exposed fiber after the final cut, considering the cutting tool table surface is obviously going to eventually get dirty or dusty?
Thanks for sharing and especially naming the tools you used
Good job you have done, thank you for sharing.
What were the other 3 coloured strands you cut after cutting Kevlar protection
they are just other fiber, some cables come bundled with more than 1 fiber line.
I hope someone answer this, so u don't need that green plastic cap right to connect it to the cable in the wall? Cause we had to get a technician, and I think they replaced wire. I had to unplug it cause someone is painting the walls. After unplugging it, I notice a clear plastic cap on the floor similar to the green one on here
The green cap is used to protect the connector when it's not plugged in to the socket.
Thanks for the knowledge, clip is very clear. I am a teacher and will teach students.
I work with one of the biggest telco in philippines, back then we used this type of SC connector, i can say that its really fast when it comes to splicing, but not that durable, after couple of months you need to resplice it again. Thats why we switch to Fujikura
Anong telco po kayo sir?
Sir Excellent work but ye Kuch DBs Lose kary gi
please show the OLTS test result if possible (IL.RL)
WOW 😲. So complicated process compare to usual utp. Thanks
Check our video about optical fiber splicer ;)
th-cam.com/video/6MuGMnj0fm0/w-d-xo.html
How do I remove the green thing plzz
This patch core can connect to sfp switch?
yes
you need lc/upc fast connector
When you realize Optical Light Flow is keep changing you life
YESS
The wire that goes inside the blue thing under the box has been pulled out. How do I put it back in ?
Which blue thing?
@@dipolen the green and black fiber optic..
@@AiiRSTRiiKEOFFICIAL If You pulled out the fiber from the housing, dissasemble the housing, prepare the fiber and assemble it, again ;)
Is it strip fiber or round Fiber
Nice tnx for sharing
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments
Perfect video, thnks and keep up
i accidentally got the fiber stuck/broken inside the transmitter how do it get it out
Remove the plug, cut the fiber and splice a new connector. If You do not have necessary equipment You need to contact a proffesional.
Thanks this is smart job🥰
I remember seeing someone doing this when i working at jabil
why did you cut other wires?
They were not needed in that case. We've only cut a small fragment of them so they would not interfere. If one needed to add more fibers, the could strip the cable and access the remaining fibers. In fiber optic installations it is crucial to have a lot of spare cable in termination boxes.
Hello, I'm an optical fiber cold junction manufacturer here.
How to remove the green cover
Put on a head guard, pinch the green cover with your hands, and then hit the table top, this is the easiest way without any tools. I am from a manufacturer can provide a complete set of ftth solution and products, skype:m52099m@163.com for more details.
Use gloves for sharps, pushing and bending fibre in quick fit connector will send light off at an angle and not straight.
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments
Thankyou sir
Perfect...
Hmm. If it's that simple, why weld the cable to another with a jack? Isn't this method cheaper and there is no need for expensive equipment to run on electricity?
there is some signal loss when using connectors like this
using a fiber fuser gives less signal loss, so you can get more distance out of the same hardware
@@cleverca22 But what's the point if it's in an end device? This is how the signal arrives in the media converter, which converts it from an optical signal to an electronic signal, for example the router at my place. If it is spliced from one optical fiber to another it makes sense, but otherwise it doesn't sound logical, but that's what ISPs do here.
❤❤❤❤
Очень хорошее видео!! Но есть косяк, волну в коннекторе оставил.
Basically light means it did it right
thanks
Great video, education
Great very helpful
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments
Very good
❤
Amazing
I am a manufacturer of optical fiber equipment in China. I hope we can have a cooperation.
Sir I want this set up
Can anyone tell about music please....
It is a series of sounds put together in a structured pattern with changes in pitch, rhythym, and tone. One or more sets of these patterns are typically called a "song."
@Sahibdeep Singh it's really divine , thank yaar, you end my search after long time.
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments
Yeah man. Use gloves.. it’s bare glass when you shave and don’t handle that shit when it’s a separate piece like a needle.
I also bought
Welcome to find us: zksfiber.com. We are manufacturer of fiber optic polishing films & production line equipments
Nice
رسب
Good Jobs
Unicam mechanical splices are garbage...
Швидше спаяти.
Unnecessary and Fancy steps
Deaf and dumb school.
Thanks