Nice looking Tray. Now you can Pick up some of the bigger Pieces and Re-Split them. Also those Grizzly Bars, to take the Slash out. Keep up your Great Videos my Friend. Ron from the Woodyard in Duanesburg NY.
The bigger sorting tray will be a great help in keeping your size. The only negative I see is when the last bolt of wood goes through you have a bit more to hand push off but that’s a great trade
You channel is awesome. I just found it about a month ago. I watched every video from the start of your channel. I have to say you are a firewood, stacking machine. Your current set up looks pretty efficient.
I probably should have ordered my 12-22 with the longer table. I definitely see the benefit of it now that I see it on yours. May have to order one or build one like Tony did.
Longer is better lol. I cut a IBC tote about 4-5" at the bottom of the tote, drilled a couple holes on one side and put bigger washers on both sides of the holes and ran a rope through so I can just pull it out from under my ULTRA. Makes clean up a breeze. Oh and dont forget to drill a bunch of drainage holes in the bottom.
When I first started following EastonMade products I asked Andrew about extended tables on a live feed. He said they could be added to any splitter when ordering for basically just the extra cost of material. Even on the smaller models like an Ultra I see guys fighting to get over sized splits out of the wedge before falling off. If they had a longer table. They could make 1 more push and simple grab them!👍 Is the tow tongue long enough or would the table need removed each time the splitter needs moved? Looks like a 1 foot deep IBC bladder might slide right under there for a debris catch...
I have the extended tray and the tow tongue is long enough. If I was towing down the road, I would probably take the tray out so I didn’t catch it taking a corner. Mine doesn’t travel much and easy to move with my tractor and a ball hitch on my tractor forks.
Good day Schieb , another great video and a great idea having that extended tray . I know u mentioned awhile ago for the automatic kick back adjustment what was that again? Cheers my friend 🍻
That is a pretty sweet tray extension! I got houses all around my house and as much cutting and splitting ive been doing, been thinking one of em gonna complain. Any advice?
I just watched a video from 3 years ago with a Rugged made splitter. In your opinion is it a good one to start wood splitting with. For home use and friends
Would it give you even better visibilty if you attached the shorter plate to the end of the new plate you just installed or would it be too much weight when it's full of splits which might tip over the Eastonmade?
Did you get the extended tray from eastonmade? Or did you have it made locally? I don’t have a conveyor and when we load into wheel barrows you have no time to grab the wood before its on the ground. Thanks!
Scheib,when you’re by yourself it makes things run smoothly and more productive with the new table 😮😊❤
The longer tray is the way to go especially if you are going to be working alone. Very nice addition.
Nice looking Tray. Now you can Pick up some of the bigger Pieces and Re-Split them. Also those Grizzly Bars, to take the Slash out. Keep up your Great Videos my Friend. Ron from the Woodyard in Duanesburg NY.
New tray is a Great!! Gonna help a lot in tge future!! Stay Hydrated and Have a Safe Day
That plate looks a lot better. Hope it works out for you.👍
Hey, brother. That new table is really nice! Chip
I think so too!
The bigger sorting tray will be a great help in keeping your size. The only negative I see is when the last bolt of wood goes through you have a bit more to hand push off but that’s a great trade
Quality numbers just got a bump which means happier customers. Well done Scheib and Andrew!
Like the extended sorting trey!! 👍👍
Congratulations Don! You’re going to love the new tray!
Hey Scheib , that extension table is nice !!!👍🏻🇺🇸🪵
More surface area is always better. You do a great job of displaying the eastonmade products
You channel is awesome. I just found it about a month ago. I watched every video from the start of your channel. I have to say you are a firewood, stacking machine. Your current set up looks pretty efficient.
I probably should have ordered my 12-22 with the longer table. I definitely see the benefit of it now that I see it on yours. May have to order one or build one like Tony did.
Looks like an option that is going to make a huge difference!
Definitely the way to go! I regret not going with the longer table on my splitter.
That has made a good job, with the extra length, to get the logs up the conver belt.
Like that you aren’t scared to try something to improve the product. Is that miller lite that you are planting, not quite deep enough. Cheers.
Nice upgrade 👍 it looks like it will really help efficiency
That made a big difference.
Longer is better lol. I cut a IBC tote about 4-5" at the bottom of the tote, drilled a couple holes on one side and put bigger washers on both sides of the holes and ran a rope through so I can just pull it out from under my ULTRA. Makes clean up a breeze. Oh and dont forget to drill a bunch of drainage holes in the bottom.
That is definitely a nice addition
Great upgrade, 🤘🏻🪵🇺🇸
Great idea SCHEIB 😊
When I first started following EastonMade products I asked Andrew about extended tables on a live feed. He said they could be added to any splitter when ordering for basically just the extra cost of material. Even on the smaller models like an Ultra I see guys fighting to get over sized splits out of the wedge before falling off. If they had a longer table. They could make 1 more push and simple grab them!👍 Is the tow tongue long enough or would the table need removed each time the splitter needs moved? Looks like a 1 foot deep IBC bladder might slide right under there for a debris catch...
The tow tongue is long enough. I need to lift the front of the table slightly to lock it on the ball.
@@adirondackwoodsman Extended or stock lenght table? Thanks...
I have the extended tray and the tow tongue is long enough. If I was towing down the road, I would probably take the tray out so I didn’t catch it taking a corner. Mine doesn’t travel much and easy to move with my tractor and a ball hitch on my tractor forks.
Awesome upgrade!👍👍
hi there looks real good to me . mice . best to all john
VERY Nice Extension ...like you said...it's a little shiny...maybe put a little Aluminum dark paint on it !! OR split on cloudy days ! LOL
The wood will take the sheen off in no time.
@@atomicwedgie8176 oh OK
Looks good to me Scheib
Good day Schieb , another great video and a great idea having that extended tray . I know u mentioned awhile ago for the automatic kick back adjustment what was that again? Cheers my friend 🍻
I LOVE YOU SCHEIB!! MAGA!
DID YOU TRY ZYN YET? QUIT SMOKING WE NEED YOU AROUND YOU ARE A GEM!
How much for the extended sorting table?
I believe it’s around 300 plus shipping
Well done///😀😀
That is a pretty sweet tray extension! I got houses all around my house and as much cutting and splitting ive been doing, been thinking one of em gonna complain. Any advice?
Just help them out with things as much as you can. My neighbors love me.
@@OutsidewithScheib 10 4 I got a HUGE snowblower on my john deere I hit their driveways maybe they'll leave me alone lol
I just watched a video from 3 years ago with a Rugged made splitter. In your opinion is it a good one to start wood splitting with. For home use and friends
It’s an excellent splitter
Right now I think the 17RS from Wolfe ridge is pretty close in price though
Seems to me an open tray made with bars added to that to help with slash would also help
I like it. Looks like you lose alot less off the tray now ?
Do the larger pieces come off the sides when you are splitting larger rounds?
Once I get some larger prices I’ll let you know I have been under the weather for that past few days.
I dig it
Go Birds!!!
Smashing 😊😊😊😊
Would it give you even better visibilty if you attached the shorter plate to the end of the new plate you just installed or would it be too much weight when it's full of splits which might tip over the Eastonmade?
I am curious, why was the slip clutch kickin in on the conveyor?
To much weight on it I had to turn it all the way up again. Wish there was a setting between the 2 settings.
Just cut the bottom of a IBC bladder for a catch pan, what I do
I like it to
Did you get the extended tray from eastonmade? Or did you have it made locally? I don’t have a conveyor and when we load into wheel barrows you have no time to grab the wood before its on the ground. Thanks!
yes you can order it from Eastonmade
Nice. Should of went wider too.
Just a thought no offense
I didn't make it you can order them right from Eastonmade
@@OutsidewithScheib true.. still would be handy. Do they make one with grizzly bars for the extention like wolf ridge does??