WITHOUT A DOUBT, the BEST DIY log-ripping jig on the net! You need LOOK NO FURTHER! Thank you very much for the video. Although, that being said, I will be making a few small modifications: 1) Add a simple metal bar with triangular teeth to the center of sloped side of the support blocks, glued in with epoxy, to better bite into the log and not allow it to rotate. The bar will be a simple affair: a 1/8 x 3/4 inch metal bar with teeth cut with a hacksaw and then filed sharp using a triangular file. 2) Blunt the lower "pointy" tip of the support blocks. In other words, instead of having the lower edge of the support blocks pointy, I will put a small vertical face there, perhaps 1/2 inch high, to register the side of the log once you have halved it.
Jason, Excellent design, explanation and demonstration. Very well done. Love the securing chocks. Very clever. Building tomorrow! Thanks from Venice, FL. Hurricane Ian survivor
Just subscribed a few days and already I’ve got owls to make, apples and pears, and now a bandsaw mill, I might even add on some chess pieces, thanks so much
i've seen so many jigs for milling small logs but this is the best of the best. In my oponion it's the most versatile and btw the easiest do build. Congrats!!
Omg I found the cure for insomnia and calling that jig you mad simple.....well of all the simple jigs I've seen this one is by far the most laborious to make only to function on par with one that only used 2 screw and a drill and literally take 30 seconds to set up
![⚡[DIY] Making a jig for sawing logs /If you do some woodworking, you should also cut logs /HOMEMADE✅](/img/n.gif)
WITHOUT A DOUBT, the BEST DIY log-ripping jig on the net!
You need LOOK NO FURTHER! Thank you very much for the video.
Although, that being said, I will be making a few small modifications:
1) Add a simple metal bar with triangular teeth to the center of sloped side of the support blocks, glued in with epoxy, to better bite into the log and not allow it to rotate.
The bar will be a simple affair: a 1/8 x 3/4 inch metal bar with teeth cut with a hacksaw and then filed sharp using a triangular file.
2) Blunt the lower "pointy" tip of the support blocks. In other words, instead of having the lower edge of the support blocks pointy, I will put a small vertical face there, perhaps 1/2 inch high, to register the side of the log once you have halved it.
Glad you like it! Thanks for watching
Ive seen the rest and as so far this is the best. thanks for posting
Thanks Jason great video am off to make one too
Thats brilliant. I’m gonna be making one of these as soon as possible.
Jason, Excellent design, explanation and demonstration. Very well done. Love the securing chocks.
Very clever. Building tomorrow!
Thanks from Venice, FL. Hurricane Ian survivor
Just subscribed a few days and already I’ve got owls to make, apples and pears, and now a bandsaw mill, I might even add on some chess pieces, thanks so much
Hi Brian, thanks for subscribing. Glad to hear you have been inspired.
Great straight forward explanation. thanks Jason
Fantastic video Jason ! Simple and straightforward. I’m off to make one today 😃👍🏼
That is very cool and I’m going to do that. Thanks very much.
i've seen so many jigs for milling small logs but this is the best of the best. In my oponion it's the most versatile and btw the easiest do build. Congrats!!
Thanks for the feedback!
Jason, that was most useful, many thanks!
GREAT job Jason
Omg I found the cure for insomnia and calling that jig you mad simple.....well of all the simple jigs I've seen this one is by far the most laborious to make only to function on par with one that only used 2 screw and a drill and literally take 30 seconds to set up
Well done!
I wonder where the accent is from, asking for a friend.
How to turn a 12 minute video into 40 minutes!!!!