Thanks for the info. Sir, i knew nothing about it just bcos i only fly it… however, i have one Matek FC 5in1 (LED+POWER HUB). And intented to have this caddx vista kit with it. Before it is built, Is there any good. Please let know, thank you.
I'm not sure what is being said at 5:40. Is a 9v regulator something that needs to be purchased separately? I have a Vista going into an iFlight Mach r5 today which I imagine is a power hungry quad. I really don't want to fry it as this is already a replacement to a Vista that fried during firmware update. It has a Beast F7 Flight Controller AIO ESC with a plug for the Caddx Vista. What do I need to do to protect this thing from frying? Thank you!!
Hi, I don't have DJI controller. I am using Taranis transmitter with frsky receiver. Then I don't need to wire ground and SBUS from Vista do FC, correct?
Hi, my CADDX vista has been linked to the DJI controller but it doesn’t work when I want to arm, I already configure sbus in beta Flight,……what do I need to check?
Just what I was looking for. I'm waiting on Flywoo Explorer LR, and the Caddx Vista separately. Already smoked the fc on the analog version while tinkering. I made the motors go in betaflight, that was fun. Waiting on the new fc. Plenty of hands on learning ahead. Glad I found your channel. Thanks for sharing your know how.
i have a zeus25 v2 aio f722 flight controller and the remote sticks are not showing any movement. I have burned hours trying to find out why my Dji remote does not show any stick movement on beta flight. I know its bound and so are the goggles. Everything is on the latest software. I have the HGLRC Petrel 120X HD 3" 4S Toothpick Racing Drone w/ Caddx Nebula Nano. I know that Betaflight connects fine but I go to the receiver tab and nothing moves. Please help. I have the black Dji remote. Thanks.
hello .. did you recommend to upgrade from old school analog to dji.. I heard this dji system get very hot.. I am from Saudi Arabia the weather here very very hot thats why I ask about upgrading..thanks
So how would I connect this to a fixed wing/plane with no flight controller? Specifically... I am trying to connect it to a plane with no flight controller but using my TBS crossfire LRS.
Hey having some trouble with my caddx vista. I updated firmware and get no video, and stuck in dji logo. But I do get my osd. Checked cables everything is plugged in right , saucer Ed it directly to battery on a 6s and used 12 volt pad on flight controller and still nothing. Maybe a firmware downgrade ? Thank you in advance!
Hey bro, I’m new and just got a bind and fly nazgul5 that came with a caddx camera and succex force video transmitter. Will that connect to my dji goggles or do I need a dji air unit or vista to connect to the goggles. Any help would be greatly appreciated thanks great content
I'm confused,, If the Caddx board you are soldering on is the VTX, what is the other half of the system?? anyone? Cant seem to figure this out, is it just needed bc HD or what?
Thanks for the video. I setup the exact same way with my Vista but it won’t arm my quad. I connected the Sbus to the Sbus pad on FC (F7)and selected Seriel RX UART in Betaflight accordingly. Any idea why it won’t arm?
Can someone help me , I can't seem to activate my caddx vista ( prebuilt drone - sector 150 ) when I open up DJI assistant and power up my quad and plug it into the laptop . DJI assistant can't detect anything
Thanks so much man, you said everything that was pertinent and right to the point. I do have a question though, if I’m using the DJI goggles and an open tx radio like the Radio Master T16s, should I still solder up the SBUS and the other pad which I can’t remember the name, but it’s for the telemetry I believe, or are those two pads just if you’re using the DJI controller. Thanks.
hi there, I have a KISS FC / ESC setup, with XF nano. It was originally supposed to be an analog setup that ran ImpulseRC OSD and a TBS vTX. However, I received a caddx vista and i would like to utilize it and get into HD FPV with this very setup. Any idea what I need to do to get the caddx working with KISS and get at least voltage read out on the DJI goggles? Is it safe to power the caddx directly from the KISS ESC board? Thanks a lot.
How can I get into dfu mode Please? I have wanted to flash my new boards for years but cannot flash.. When I try impulserc driver fixer it just says cannot access com3. Failed! How can I fix? I can connect to betaflight and have the latest configuration and don't want to mess up my drivers.. Can someone please help me😔
Thank you for all you hard work, I follow you on TH-cam and have a question regarding the vista. I purchased a Kopis mini without the Caddx vista because I bought the vista separately. There is a 20x20 mounting pattern on the vista but do you know what size screw is needed to mount the vista on top of the ESC that is on the stock Kopis Mini Caddx Vista? Thanks Kevin
Hello everybody, is anyone know how to wire menu board into vista polar ? Cause i want to restore factory settings for vista. Please show me where to wire . Thank you so much.
Hello! Great video! I have a question since i am thinking on buying one. I do not own the DJI system. Remote or goggles. But I do have a a set of goggles that can record the screen. Can I use those with this Camera? will the picture be recorded at digital quality? or do I need to have the DJI goggles to record in HD? Thank you
Great Job. I really like the way you explain (in detail) AND LOVE the new format where you draw lines to connect one thing to another. Keep up the Good Work. Just a note: the digital video is just way to costly ... goggles alone are terribly expensive...plus I wear eyeglasses which complicates things a bit. The only goggles that I have found that work well are the FXT Viper V2 which fit well with eyeglasses (without the diopter change outs; more money)... and they are NOT digital. The DJI gear...forget it. How about some cost effective digital goggles; that might make it worth it (???)
Just another way to solder the wires on which is safer. Tin the pads ad usual with enough solder. Set the Vista on it's opposite edge and lay the tinned wire in that little divert and proceed to solder so the wire is at right angles to the pad. With the correct amount of solder on the pads plus the wire it provides a really tough joint with the wires facing the right way and compact.
haha, one week after i setup my first one... did you know that the cable of the vista is shorter than the one of the dji airunit? lucky for me the cables are compatible, otherwise it would have completely screwed over my last build
Can you make a Video about the Zeez F7 Full Stack with LEDs Please Becurse you Cam explain the Components so good thed i can understand you realy Easy and i am Not so realy up to Date with Drone Stuff thats i would hear the Quality and Products about the Company Zeez. Thx for your good Videos
Wish you luck ... I almost cut down a 9 meter tree the other day to get my quad down, Luckly one of my friends came to rescue if he hadn't I was going for the chainsaw.
Hi man I like your channel well done! I would like to ask something why I’m having falsife every single time when I’m doing flips???i destroyed two quad because of this 😞😞😞😞I should of stay analog don’t change the f***ing digital system!im using crossfire .cheers
This is really bad advice. You don’t need to remove the board to solder to it. In fact when you remove the board you broke the thermal compound on that center ic. Don’t do this.
Caddx Vista: bit.ly/2Yylo5r
Hex Driver: bit.ly/2NwBVxt
FPV Merch: shopdronemesh.com/product-category/fpv/
best most detailed guide , just point blank. This should be the golden standard for explanation of wiring.
Thanks for the info. Sir, i knew nothing about it just bcos i only fly it… however, i have one Matek FC 5in1 (LED+POWER HUB). And intented to have this caddx vista kit with it. Before it is built, Is there any good. Please let know, thank you.
Can you do this with a spektrum reciever?
Great video! I will be re-watching in 2-4 days when my caddx arrives!!
Thanks for this great video. At 1200 mW at 50 mbts can the vista get to the same max distance as the standard dji air unit ( 13.2 km hard limit)?
I’ve just connected my first unit exactly like that , no power ! Do have have to bind first for it to power up ???
Thanks
I'm have to power straight from 6S battery how it handles it fine. Bought ultra low esr cap to help
I'm not sure what is being said at 5:40. Is a 9v regulator something that needs to be purchased separately? I have a Vista going into an iFlight Mach r5 today which I imagine is a power hungry quad. I really don't want to fry it as this is already a replacement to a Vista that fried during firmware update. It has a Beast F7 Flight Controller AIO ESC with a plug for the Caddx Vista. What do I need to do to protect this thing from frying?
Thank you!!
Hi. Installation was sucessfull. How to get telemetry on DJI OSD?
Hi, I don't have DJI controller. I am using Taranis transmitter with frsky receiver. Then I don't need to wire ground and SBUS from Vista do FC, correct?
Most under rated channel
Not getting OSD on caddx vsita. Have it going to Rx4/Tx4 on the Aikon Stack. Goggles have custom OSD on.
Nice one but if you connect sbus on F4 then were will we connect the RX xm+ etc..?
true or false? You ONLY need to connect Caddx TX to the FC if you're flying the DJI radio?
Hi, my CADDX vista has been linked to the DJI controller but it doesn’t work when I want to arm, I already configure sbus in beta Flight,……what do I need to check?
Just what I was looking for. I'm waiting on Flywoo Explorer LR, and the Caddx Vista separately. Already smoked the fc on the analog version while tinkering. I made the motors go in betaflight, that was fun. Waiting on the new fc. Plenty of hands on learning ahead. Glad I found your channel. Thanks for sharing your know how.
Dear friend
the binding button on my vista is broken (little black plastic), do you know can I do for activating binding process ?
Thank you
Why there’s 2 ground on the vista? Is it necessary to wire the 2?
Can I install this Caddx Vista to a FC with onboard VTX? thanks
i have a zeus25 v2 aio f722 flight controller and the remote sticks are not showing any movement. I have burned hours trying to find out why my Dji remote does not show any stick movement on beta flight. I know its bound and so are the goggles. Everything is on the latest software. I have the HGLRC Petrel 120X HD 3" 4S Toothpick Racing Drone w/ Caddx Nebula Nano. I know that Betaflight connects fine but I go to the receiver tab and nothing moves. Please help. I have the black Dji remote. Thanks.
If i connect the caddx vista to sbus and tx and ex 2. What uart and serial ports do I need to enable?
hello .. did you recommend to upgrade from old school analog to dji.. I heard this dji system get very hot.. I am from Saudi Arabia the weather here very very hot thats why I ask about upgrading..thanks
When flying the air flow will help. Just don't leave it powered up for long before flying
yes upgrade, it's much better, just don't let the quad sit too long armed and not moving
The antenna wire is very short is there a way to make it longer? I have a BNF drone with Caddx vista that used a different antenna.
Hello, I'm getting solid red ligt=ht on my vista, it wont bind to my goggles or connect to computer as well. How to fix this? Thank you.
So how would I connect this to a fixed wing/plane with no flight controller? Specifically... I am trying to connect it to a plane with no flight controller but using my TBS crossfire LRS.
Could you please go over alternate way to connect voltage?
Hi there can I conect the vista to a F3 fight controller on a armattan chameleon cheers Phil
Hey having some trouble with my caddx vista. I updated firmware and get no video, and stuck in dji logo. But I do get my osd. Checked cables everything is plugged in right , saucer Ed it directly to battery on a 6s and used 12 volt pad on flight controller and still nothing. Maybe a firmware downgrade ? Thank you in advance!
I have the beta95x, seems the S-bus does not need to be connected, is that correct? FC On those is an F405 for 4S and I am not using a DJI Remote.
Hey bro, I’m new and just got a bind and fly nazgul5 that came with a caddx camera and succex force video transmitter. Will that connect to my dji goggles or do I need a dji air unit or vista to connect to the goggles. Any help would be greatly appreciated thanks great content
How much current does a 9v regulator need to provide to power the Vista?
can i change to other lens with different FOV? it is 12mm thread?
I don’t have custom osd, any help please?
Mounting holes are those M2 or M2.5? Thanks! same for 20x20 and 25.5x25.5 size ?
If you use a Vbat pad on the FC (near the part of the board), running 6s, is that enough to prevent voltage spikes?
I'm confused,, If the Caddx board you are soldering on is the VTX, what is the other half of the system?? anyone? Cant seem to figure this out, is it just needed bc HD or what?
Hey, are there any drones under 120$ that you can mount a gopro on you could recommend ?
Build your own frame buy electronic parts
Thanks for the video. I setup the exact same way with my Vista but it won’t arm my quad. I connected the Sbus to the Sbus pad on FC (F7)and selected Seriel RX UART in Betaflight accordingly. Any idea why it won’t arm?
Is there a quadcopter stm32 that has actual outputs for servos? with 5v?
SBUS is not needed you don't have dji controller? didn't understand that exactly
Can you do a video on how to setup a DJI air unit to an RC Crawler?
Maybe a small build.
Can you please help me I can't find vtx tables for the polar vista starlite kit so I can fill in Betaflight please help a noob
Do you need the dji goggles in order to use the caddx vista? Or can I use any goggles like fatshark, aomway, or eachine?
The Caddx was designed to be used with DJI goggles. It is pretty much a clone of the DJI Air unit. You can use a different transmitter however.
Can someone help me , I can't seem to activate my caddx vista ( prebuilt drone - sector 150 ) when I open up DJI assistant and power up my quad and plug it into the laptop . DJI assistant can't detect anything
Where can I get a video receiver to receive the signals to get the signals transmitted?
DJI googles
Thanks so much man, you said everything that was pertinent and right to the point. I do have a question though, if I’m using the DJI goggles and an open tx radio like the Radio Master T16s, should I still solder up the SBUS and the other pad which I can’t remember the name, but it’s for the telemetry I believe, or are those two pads just if you’re using the DJI controller. Thanks.
What mounting bracket do you use on 5" frame? I can't seem to find one that i know is going to work.
Question. What is the best fpv goggle for a caddix system? Thank you.
only works for digital. so DJI FPV Goggles
hi there, I have a KISS FC / ESC setup, with XF nano. It was originally supposed to be an analog setup that ran ImpulseRC OSD and a TBS vTX. However, I received a caddx vista and i would like to utilize it and get into HD FPV with this very setup. Any idea what I need to do to get the caddx working with KISS and get at least voltage read out on the DJI goggles? Is it safe to power the caddx directly from the KISS ESC board? Thanks a lot.
Mine was delivered last week...just waiting for goggles and quad parts to set it up..... Exciting!
Finally someone that explains why you CrissCross RX and TX!
How can I get into dfu mode Please? I have wanted to flash my new boards for years but cannot flash.. When I try impulserc driver fixer it just says cannot access com3. Failed! How can I fix? I can connect to betaflight and have the latest configuration and don't want to mess up my drivers.. Can someone please help me😔
Thank you for all you hard work, I follow you on TH-cam and have a question regarding the vista. I purchased a Kopis mini without the Caddx vista because I bought the vista separately. There is a 20x20 mounting pattern on the vista but do you know what size screw is needed to mount the vista on top of the ESC that is on the stock Kopis Mini Caddx Vista?
Thanks Kevin
Hello everybody,
is anyone know how to wire menu board into vista polar ?
Cause i want to restore factory settings for vista.
Please show me where to wire .
Thank you so much.
Hello! Great video! I have a question since i am thinking on buying one. I do not own the DJI system. Remote or goggles. But I do have a a set of goggles that can record the screen. Can I use those with this Camera? will the picture be recorded at digital quality? or do I need to have the DJI goggles to record in HD?
Thank you
I drone? But do you......
Great Job. I really like the way you explain (in detail) AND LOVE the new format where you draw lines to connect one thing to another. Keep up the Good Work. Just a note: the digital video is just way to costly ... goggles alone are terribly expensive...plus I wear eyeglasses which complicates things a bit. The only goggles that I have found that work well are the FXT Viper V2 which fit well with eyeglasses (without the diopter change outs; more money)... and they are NOT digital. The DJI gear...forget it. How about some cost effective digital goggles; that might make it worth it (???)
just save up or buy with affirm financing on the dji site, nothing analog comes close, it's so much better
Great video, easy to follow
Awesome video. This was exactly what I’ve been searching for. Great tip wrt the voltage regulator since I will be running 6s
Just another way to solder the wires on which is safer.
Tin the pads ad usual with enough solder.
Set the Vista on it's opposite edge and lay the tinned wire in that little divert and proceed to solder so the wire is at right angles to the pad.
With the correct amount of solder on the pads plus the wire it provides a really tough joint with the wires facing the right way and compact.
thank you for making this video
haha, one week after i setup my first one...
did you know that the cable of the vista is shorter than the one of the dji airunit?
lucky for me the cables are compatible, otherwise it would have completely screwed over my last build
There is different lengths now available.
Such a good video nicely explained my guy! Sub earned !
Really great video. Thanks so much.
Thank you for the video!
Wonder why other builders dont cross the wires?...RX-TX
Great video, very helpful!!
Can you make a Video about the Zeez F7 Full Stack with LEDs Please
Becurse you Cam explain the Components so good thed i can understand you realy Easy and i am Not so realy up to Date with Drone Stuff thats i would hear the Quality and Products about the Company Zeez.
Thx for your good Videos
Great job as I always 👊👊💪💪
Great video! Thanks for your help 🤙
You sold me a frame I built it with the caddx vista . First flight in a tree for a few days . I’m hoping a tree climber will get it tomorrow morning
Wish you luck ... I almost cut down a 9 meter tree the other day to get my quad down, Luckly one of my friends came to rescue if he hadn't I was going for the chainsaw.
A good casting rod and reel can help with high strength magnet to drag it or lower it out.
Great video !
AMAZING VIDEO. THANK YOU!
Bien claro que esquematizas, felicidades 😊
Thank YOU!!!
Excellent. Thank you.
Great 🥇👍
Hi man I like your channel well done! I would like to ask something why I’m having falsife every single time when I’m doing flips???i destroyed two quad because of this 😞😞😞😞I should of stay analog don’t change the f***ing digital system!im using crossfire .cheers
Thx this is big help
Thank you :)
First! Awesome video 👍.
that is not how you install the antenna it is supposed to go under the heatsink cover on both sides
This is really bad advice. You don’t need to remove the board to solder to it. In fact when you remove the board you broke the thermal compound on that center ic. Don’t do this.
Most under rated channel