Those forklift drivers are some g's! Especially that guy in the blue t-shirt. The speed and skill with which they move those trench plates is insane. Practice practice practice, or as they call it work.
I like the way they painted the cylinder barrels black. It breaks up so many square feet of yellow and really pops. I was afraid it was going to run over a fork lift and not even know it. I'd like to have been the salesman that closed that deal. Bet they don't sell one of those everyday. Bucket looks like it's going to load shot rock somewhere. What a machine!
I can't see any operation buying a 6020 then throwing a novice operator in it....I imagine seniority would determine the guy who gets to play with the new toy.
No, said mine executive might have seen the thing and ordered a *dozen* of them. If your mine is in need of mega-excavators and you want to see different models, that's why they HAVE expos in the first place.
@@kingmichaeln1 Oh heck no I'm not a rigger. I'm just in a business where these kinds of expos are pretty routine. It's a great way to see all the latest toys, and if one happens to catch your eye as being something your lab might need, you take a business card and set up a vendor deal with 'em. Admittedly, in my business, the machines are a whole lot *SMALLER* than this behemoth...
That semi truck at the door puts it into scale... The forklifts are rentals, along with the trench plates. The drivers are hired on part-time and do not fall under OSHA guidelines from what I understand... This is where everyone is responsible for his own saftey and is watching to make sure he does not kill anyone as well. It works, convention after convention and there is no accidents. Probably because no one is complacent from long familiarity with operators.
Yup, work this big really multiplies the "give-a-fuck" factor of everyone working the gig, and going non-union and per-job contract work gets things done significantly quicker and more efficiently than the barrage of guidelines and employee policies and what not that slow this sort of stuff down. I've worked a few gigs - nothing quite like this of course, just some concerts & wrestling shows - and, frankly, the workers prefer it this way too, since we don't have the guidelines slowing US down either. I get the feeling that the efficiency created by this mutual benefit and the pretty consistent safety record of these things leads the government organizations like OSHA to overlook a lot of the stuff that they could most certainly nit-pick about it. It only takes a couple incidents that make headline news to bring the dogs out though, and I think that everyone involved is mostly aware of this. Like walking on egg shells - as quickly and efficiently as you can, lol
Minexpo is a conference where all the bigwigs from upper management down to branch managers of earthmoving/mining machine suppliers, miners and earthmoving related businesses go to to rub shoulders, show off the newer machines and try to score contracts.
I'm impressed that thing isn't splitting the pad, even with platforms. We have a Conex lift that we can't drive on the pad because it'll crack it, and our pad is 8" thick.
Fork truck operators should work the opposite way. Drop the furthest steel plate on the far side (left) and then the near side. Avoids the extra travel time and speeds up the process. (around 2:22)
ArcticAstrophysics They are for working on a hard surface like rock. If the tracks were wide they would get bent. Wide tracks are only needed to spread the weight of a machine that has to work on soft ground.
MASSIVE CAT machine but very slow to move.. Those machines were used to build old Egypt pyramids, but just for pulling force to pull base platforms on rollers to transport big rocks up pyramid and maybe to escavate some foundations
Just imagine how thick and reinforced that expo centers concrete slab is. I bet it's built a category 3 airport runway and a really deep carefully prepaired ground bed under it so the ground does not heave under this digger.
And then at the end of the vid you think, holy shit they make one bigger than that and then the recommended videos shows there's an ex8000, even bigger!
Self Aware This is actually the last piece of equipment to move out of that building. It was full of excavators and trucks the size of the Cat 6020B and bigger a couple of days before. Cat’s stand just happened to be at the far end. There was a much closer door but the Cat had to go out the far door to a parking lot to be disassembled.
CAT DIESEL POWER You would be disappointed. It isn't as powerful as you think it should be. Also the controls are a little weird, you can't boom up and curl the stick at the same time. It takes a little getting used to. Digging level takes some getting used to as well. You're up on a 20ft tall bench, looking down from a high angle. You'll think you're level until you get down on the ground. What looks like just a small high spot or hole is a hell of a lot bigger on the ground.
![ตรงที่เดิม - ฝน พรสุดา [ต้นฉบับ :เบส ขวางหวัน]](http://i.ytimg.com/vi/c5YnbGEztI8/mqdefault.jpg)
안녕하세요 굴착기 사장님잘바선리 입니다 오늘은 정말 재미있게 잘바습니다 좋아요
Andrew Camarata needs this Machine !!
Lawn mower smash 2.0??
Those forklift drivers are some g's! Especially that guy in the blue t-shirt. The speed and skill with which they move those trench plates is insane. Practice practice practice, or as they call it work.
They're getting union pay, im surprised They're even working
Most awesome R/C yet! You can sit in it too.
I rented one of these when I had to put a new water line into my house from the street. Worked well.
NeilLB7 did you have to dig through a mountain range?
I like the way they painted the cylinder barrels black. It breaks up so many square feet of yellow and really pops. I was afraid it was going to run over a fork lift and not even know it. I'd like to have been the salesman that closed that deal. Bet they don't sell one of those everyday.
Bucket looks like it's going to load shot rock somewhere. What a machine!
They always have that really nice appeal when they're new. And then seeing them in action is over the top. Provided it has a professional operator.
Make a fun movie; with an amateur operator!
@@paullangford8179 Hey I love operating trackhoes, and for some jobs I'm good enough. Some jobs require a pro, though.
Letsdig18
I can't imagine anyone letting somebody who wasn't a professional operate a beast like this one
I can't see any operation buying a 6020 then throwing a novice operator in it....I imagine seniority would determine the guy who gets to play with the new toy.
안녕하세요 사장님 정말 재미있게 잘바습니다 좋아요
Imagine using this for a goldmining operation, Parker needs this.
How much for the thumb attachment?
I hope that building is well ventilated to get the fumes out.
This here is for when you need the "ENTIRE" load moved in ONE scoop!!💪🏾👌🏾👍🏾❤💯
or the entire mine
@@alex46215 Ikr!😄👌🏾👍🏾
Those forklifts are like babies running around in circles.
which the machine series?
How did they make such small RC forklifts and cameras to fit in a toy factory!?
Thanks for the video.
Found my new Tonka toy. YEAAAHHHH.
What is following it out of the building? Ovb mining equipment but what is it
That thing would have saved me so much time putting in my retaining wall this summer.
Lindo, lindo, lindo...meu maior sonho é trabalhar com essa mega, mega...extraordinária.
I am so sure some mine executive saw this at the expo and was like... you know what? I think I'll have one of those!
Z
They wouldn’t make it if there isn’t a need for it
No, said mine executive might have seen the thing and ordered a *dozen* of them. If your mine is in need of mega-excavators and you want to see different models, that's why they HAVE expos in the first place.
Archibald Mirenopteryx If you’re a rigger do you get training on the heavy equipment and cranes?
@@kingmichaeln1 Oh heck no I'm not a rigger. I'm just in a business where these kinds of expos are pretty routine. It's a great way to see all the latest toys, and if one happens to catch your eye as being something your lab might need, you take a business card and set up a vendor deal with 'em. Admittedly, in my business, the machines are a whole lot *SMALLER* than this behemoth...
how thick is that shop floor?
How big was the Hatachi?
Вау! Красавчег!!!! Дайте мне его джойстики в руки! Я хочу им управлять! Хочу работать этим чудом ! Caterpillar ты лучший! 👍
They finally made a pc2000 competitor. About time
So nice! :D A boys dream!
how thick is the concrete below that thing??
I love cat excavator much,as an operator I wish I will have one of those excavator someday to operate.
cat is the best
Love live Liebherr
Love live Liebherr
How is the machine transported?
What’s the fuel consumption of that per hr?
can some explain to me the benefits of a inverted main cylinders
Hi, What was behind the Cat 6020B? Another Cat following on the same steel plates.
charlie8you it was a drill rig
Thank u so much!
needs more Jawas
That Hitachi was a monster
grumpybill dwarfed that cat! I noticed that too.
does it have a trailer hitch?
I sometimes miss operating those mining excavators, was kinda enjoyable in nice blasts but not so much in not so good blasts
That semi truck at the door puts it into scale... The forklifts are rentals, along with the trench plates. The drivers are hired on part-time and do not fall under OSHA guidelines from what I understand... This is where everyone is responsible for his own saftey and is watching to make sure he does not kill anyone as well. It works, convention after convention and there is no accidents. Probably because no one is complacent from long familiarity with operators.
Yup, work this big really multiplies the "give-a-fuck" factor of everyone working the gig, and going non-union and per-job contract work gets things done significantly quicker and more efficiently than the barrage of guidelines and employee policies and what not that slow this sort of stuff down. I've worked a few gigs - nothing quite like this of course, just some concerts & wrestling shows - and, frankly, the workers prefer it this way too, since we don't have the guidelines slowing US down either.
I get the feeling that the efficiency created by this mutual benefit and the pretty consistent safety record of these things leads the government organizations like OSHA to overlook a lot of the stuff that they could most certainly nit-pick about it. It only takes a couple incidents that make headline news to bring the dogs out though, and I think that everyone involved is mostly aware of this.
Like walking on egg shells - as quickly and efficiently as you can, lol
How would you transport that?????????seems a little extreme
That concrete slab is quite sturdy.
The plates spread the weight over the whole area of the plate otherwise the tracks would be punching holes through the concrete.
Nice piece of machinery
this has to be enormous pain to set up and then i like just to move them
this looks hugeee ,, imagine what CAT 6090 will look like
Good way to find sinkholes...
which brand excavator is best in the world
what happens from here? surely they dont go on a truck?
Nevermind the CAT, look at the size of that HITACHI sitting outside!!!
This isn't the biggest CAT either.. So you can't compare them
CAT makes one almost identical to it
continues until success ❤️ semangat sukses. ❤️💜
Nice and clean brand new.
Imma bring this thing to cars and coffee.
No burnouts ED! Else you can never come back!
is this some sort of show for ppl to look at top of the line machines ?
YES
Minexpo is a conference where all the bigwigs from upper management down to branch managers of earthmoving/mining machine suppliers, miners and earthmoving related businesses go to to rub shoulders, show off the newer machines and try to score contracts.
Where is this show
Father of elephants passed by, and the dwarves were busy unfurling carpets for the king
No ship can sail in the open water without tug boats remember that.
@@Me-ws5zt in this case it's an excavator with forklifts
I'm impressed that thing isn't splitting the pad, even with platforms. We have a Conex lift that we can't drive on the pad because it'll crack it, and our pad is 8" thick.
000000
Keep in mind a lot of these venues have under ground tunnels for utilities and deliveries as well....
This has to be an enormous pain to set up and then have to break them down just to move them. I could only imagine how much that cost
Musicalbullet yes this also comes with a wheeled version as well
Probably about $4000/hr
Musicalbullet we 6,500 an hour 1 100 ton beam trailer and two flat beds
The bucket looks so small for that machine. Might as well get a dragline
it creates job..
I need a root removed in my back garden, does anyone know if this has enough hp for the job?
better use 2 just be be sure
Nm
I don't think so 🤔😣
H
is that root the size of a house? lol
How was it?
How much does that thing cost!!
It will no doubt have to be taken apart to move-put back together once on location.
Now that is an excavator I would love to have a model of!
me too
I’d love to know the price for that beast, would someone please tell me how much does it cost
Ask a Cat Dealer not us :D
forklifttin has made some of his wheels or it is dangerous to
what other configuration can it be apart from the backhoe
front shovel
I wouldn't like it running over my foot lol 😂
What was the machine behind it when it was tracking out
Some sort of transfer conveyor from the looks of it.
Whats the Hitachi next to it makes the cat look small
مصمنا اى لى ة لب بى
YES it is much bigger
Fork truck operators should work the opposite way. Drop the furthest steel plate on the far side (left) and then the near side. Avoids the extra travel time and speeds up the process. (around 2:22)
They get paid by the hour
There’s always that one guy who knows how to do your job better💀
Qual o valor de um trem desse
I would love to have the money to ship it there and the money for assembly and disassemble and ship it back out.
Linda...linda.!! Meu sonho é trabalhar com uma dessa ou a...monstro...Liebherr 9800...lindaaaaaaaaaaaa.!!👍👍👍👍😭😭😭😭
Horyyyy shietttttt, what do you use one of these for?
Mostly small jobs around the yard.
Why does it have such skinny tracks? Is it to put more pressure onto the ground?
ArcticAstrophysics They are for working on a hard surface like rock. If the tracks were wide they would get bent. Wide tracks are only needed to spread the weight of a machine that has to work on soft ground.
That makes sense thank you
Is this special built to fit our larger American friends?
Tracks seem small and narrow for the size of this machine. Maybe its just me
Anyone know were the restroom is
Allah Pak bless you dear bro 😊
esta increible
I never seen restroom sign this big
I thought the same thing, must be a hell of a toilet in there
wow very big cat 6020B excavator
I want that for Christmas
Rodney Stewart:L.
..Lk
@@trucduong5690 qRxyhr to your
@@bobykurian9422 കുരിയാച്ചാ ആണോ കുഞ്ഞേ ..?
Lol
beautiful😍😍👌👌
Do they take Visa??
The Arnold Schwarzenegger of machines!
On another note, why do the threads seem a little narrow on this ?
It will be in rock so doesn't need the width to float it on soft ground.
MASSIVE CAT machine but very slow to move.. Those machines were used to build old Egypt pyramids, but just for pulling force to pull base platforms on rollers to transport big rocks up pyramid and maybe to escavate some foundations
Just imagine how thick and reinforced that expo centers concrete slab is. I bet it's built a category 3 airport runway and a really deep carefully prepaired ground bed under it so the ground does not heave under this digger.
And then at the end of the vid you think, holy shit they make one bigger than that and then the recommended videos shows there's an ex8000, even bigger!
Damn that is a monster!
Sogood?
That is the biggest restroom sign ever lol
Karaoke
Karao,ke
Karao
ke
Cat: I'm the biggest here
Hitachi (chilling in the parking lot): Hold my beer
How original ...
@@brucedressel8873 ....
Did you see the Hitachi? when it parked up? twice the size
Aq sdh lama kerja di tambang coal,baru ini aq tau ada sekalinya exavator caterpillar yg monsternya,selama ini yg kutau cuma damptruk besar...kagum...
Are the Hitachi and Cat in the same class of shovel?
I hope not. That Hitachi sure looks bigger.
No the Cat 6020B is a 254 ton class mining machine the Hitachi is a 600 ton class mining machine the Cat equivalent is the 6060FS
ทำไม ไฮดอลิก ที่ ตัวรถ กับ บูม ต้องกลับหัว ด้วยครับ
Question? Why exhibit it so far from the door?
Self Aware This is actually the last piece of equipment to move out of that building. It was full of excavators and trucks the size of the Cat 6020B and bigger a couple of days before. Cat’s stand just happened to be at the far end. There was a much closer door but the Cat had to go out the far door to a parking lot to be disassembled.
Awesome Earthmovers put it on my trailer I’ll take it.... assembled. What are the terms of sale.?” I knew there was a closer door.😎.
Does it have automatic greasing though ??
George Osprey yes 5 gallon reservoir
Sst Pilot lol unless they changed it from the one I run from time to time, it's got a 55 gallon drum.
uhhg!! after runnin a 345 for the last 30 years! I would love!! to dig a septic tank with this mutha!! lol GOOOOO! ! Cat power!!!
CAT DIESEL POWER You would be disappointed. It isn't as powerful as you think it should be. Also the controls are a little weird, you can't boom up and curl the stick at the same time. It takes a little getting used to. Digging level takes some getting used to as well. You're up on a 20ft tall bench, looking down from a high angle. You'll think you're level until you get down on the ground. What looks like just a small high spot or hole is a hell of a lot bigger on the ground.
nice video.........
Чисто как хирургический.Кат впереди планеты всей.
Use it to dig the pit for an inground pool. Yeah! 2 scoops!
This is awesom 😎
а как их увозили потом или оставили как памятники?
I wonder how the ancient Egyptians would feel about this
locksmithmuggle they would probably figure out how to build bigger stuff.. just a guess
They used slave labor. One man operating that bucket could do more in a day than 10,000 slaves could do in a month.
This machine is not strong enough to lift the pyramid blocks so they would not be impressed
@Katie Giles considering I run them for a living and know what the can lift I don't think so maybe you should research the weight of the blocks.
Boo shaka
I thought that CAT was as huge as they get until I saw the Hitachi it parked beside.